Development of multilayer coating system based on electrophoretic deposition process
-
- AZUMA Shota
- Department of Environmental and Life Sciences, Toyohashi University of Technology
-
- YAMADA Hideto
- Department of Electrical and Electronic Information Engineering, Toyohashi University of Technology
-
- KAWAMURA Go
- Department of Electrical and Electronic Information Engineering, Toyohashi University of Technology
-
- MUTO Hiroyuki
- Institute of Liberal Arts and Science, Toyohashi University of Technology
-
- MIZUSHIMA Takanori
- Department of Environmental and Life Sciences, Toyohashi University of Technology
-
- MATSUDA Atsunori
- Department of Electrical and Electronic Information Engineering, Toyohashi University of Technology
抄録
The automatic multilayer coating system based on electrophoretic deposition process, including coating, drying, and washing, is proposed for stable preparation of multilayered films. As demonstration of the system, multilayered films consisting of layers of LiNi1/3Mn1/3Co1/3O2 (NMC) and Al2O3 particles were fabricated under constant applied voltage and current modes. The smoothly coated films were formed without any cracks or defects in both modes. The films with uniform thickness of each layer (average thickness of NMC and Al2O3 are 3.2 and 6.5 µm respectively) were obtained at low constant current density. Results indicate that ordered film structure such as thickness of inside layers and layers number are controllable by simply varying the process flow conditions. It is expected that the system is able to be employed to make not only multilayered films but also particle-reinforced composite materials.
収録刊行物
-
- Journal of the Ceramic Society of Japan
-
Journal of the Ceramic Society of Japan 125 (4), 317-321, 2017
公益社団法人 日本セラミックス協会
- Tweet
詳細情報 詳細情報について
-
- CRID
- 1390282680262626688
-
- NII論文ID
- 130005530354
-
- ISSN
- 13486535
- 18820743
-
- 本文言語コード
- en
-
- データソース種別
-
- JaLC
- Crossref
- CiNii Articles
- KAKEN
-
- 抄録ライセンスフラグ
- 使用不可