Miniature Design Technique of Stabilized C-Band p-HEMT MMIC Doherty Power Amplifier with Lumped Element Load Modulator
-
- YOSHIDA Tsuyoshi
- The University of Electro-Communications
-
- TAKAYAMA Yoichiro
- The University of Electro-Communications
-
- ISHIKAWA Ryo
- The University of Electro-Communications
-
- HONJO Kazuhiko
- The University of Electro-Communications
Abstract
<p>A broadband miniature GaAs p-HEMT MMIC Doherty power amplifier (DPA) with a series connected load operating at the C band has been developed. To minimize the circuit size, a lumped-element load modulation circuit without a quarter wavelength transmission line has been introduced to MMIC technology. For both an input and output power divider/combiner circuit, two baluns are used to reduce the length of the phase adjuster circuit without causing instability. An inherent DPA instability problem related with the degenerated sub-harmonic frequency has been analyzed with the S and T parameters of DPA circuit components, resulting in a novel stabilized circuit. The developed stabilized DPA delivered a maximum power added efficiency (PAE) of 49% and a maximum output power of 23.4dBm. Greater than 40% PAE below a 10-dB input back-off from a saturated output power is obtained for a frequency range of 6.1 to 6.8GHz.</p>
Journal
-
- IEICE Transactions on Electronics
-
IEICE Transactions on Electronics E99.C (10), 1130-1139, 2016
The Institute of Electronics, Information and Communication Engineers
- Tweet
Keywords
Details 詳細情報について
-
- CRID
- 1390282679356641536
-
- NII Article ID
- 130005598141
-
- ISSN
- 17451353
- 09168524
-
- Text Lang
- en
-
- Data Source
-
- JaLC
- Crossref
- CiNii Articles
- KAKEN
-
- Abstract License Flag
- Disallowed