Number of Detectable Gradations in X-Ray Photographs of Cavities Inside 3-D Printed Objects
-
- SUZUKI Masahiro
- Kanagawa Institute of Technology
-
- SILAPASUPHAKORNWONG Piyarat
- Kanagawa Institute of Technology
-
- TORII Hideyuki
- Kanagawa Institute of Technology
-
- UEHIRA Kazutake
- Kanagawa Institute of Technology
抄録
<p>We evaluated a technique for protecting the copyright of digital data for 3-D printing. To embed copyright information, the inside of a 3-D printed object is constructed from fine domains that have different physical characteristics from those of the object's main body surrounding them, and to read out the embedded information, these fine domains inside the objects are detected using nondestructive inspections such as X-ray photography or thermography. In the evaluation, copyright information embedded inside the 3-D printed object was expressed using the depth of fine cavities inside the object, and X-ray photography were used for reading them out from the object. The test sample was a cuboid 46mm wide, 42mm long, and 20mm deep. The cavities were 2mm wide and 2mm long. The difference in the depths of the cavities appeared as a difference in the luminance in the X-ray photographs, and 21 levels of depth could be detected on the basis of the difference in luminance. These results indicate that under the conditions of the experiment, each cavity expressed 4 to 5bits of information with its depth. We demonstrated that the proposed technique had the possibility of embedding a sufficient volume of information for expressing copyright information by using the depths of cavities.</p>
収録刊行物
-
- IEICE Transactions on Information and Systems
-
IEICE Transactions on Information and Systems E100.D (6), 1364-1367, 2017
一般社団法人 電子情報通信学会
- Tweet
詳細情報 詳細情報について
-
- CRID
- 1390282679355772032
-
- NII論文ID
- 130005687684
-
- ISSN
- 17451361
- 09168532
-
- 本文言語コード
- en
-
- データソース種別
-
- JaLC
- Crossref
- CiNii Articles
- KAKEN
-
- 抄録ライセンスフラグ
- 使用不可