ワイヤレス電力伝送における高次共振を用いたマルチバンドコイルの設計

  • 古里 洸一
    東京大学大学院新領域創成科学研究科
  • 居村 岳広
    東京大学大学院工学系研究科
  • 堀 洋一
    東京大学大学院新領域創成科学研究科 東京大学大学院工学系研究科

書誌事項

タイトル別名
  • Design Method of Multi-Band Coil using High Order Resonance in Wireless Power Transfer
  • ワイヤレス デンリョク デンソウ ニ オケル コウジ キョウシン オ モチイタ マルチバンドコイル ノ セッケイ

この論文をさがす

抄録

<p>Wireless power transfer (WPT) has been a popular research topic in recent years. The allowed frequencies for WPT are limited by the industrial, scientific, and medical (ISM) radio bands and the laws of the respective countries. Different applications of wireless power transfer require different frequency bands. A single transmitter coil that can adapt to multiple frequency bands is needed to reduce the number of transmitter coils. In this paper, a transmitter coil design for two frequencies using a high order resonant frequency of an open end coil and a short end coil are proposed. Two types of multi-band coils, an open end coil and a short end coil are discussed. In the case of the open end type, for fundamental study, the second resonant frequency is set at 13.56MHz (ISM band) by adjusting the coil shape. It is confirmed that only the second resonant frequency can be set by adjusting the coil shape parameters and can be used for WPT by experiment. In the case of the short end type, the first resonant frequency is set at 85kHz (for Electric Vehicles) by using capacitor. The second resonant frequency is set at 6.78MHz (ISM band) by adjusting the coil shape. It is confirmed that the second resonant frequency can be set by adjusting the coil shape parameters and can be used for WPT by experiment. Finally, it is confirmed that a short end coil with a capacitor is superior to an open end coil because two resonant frequencies can be set independently.</p>

収録刊行物

参考文献 (4)*注記

もっと見る

関連プロジェクト

もっと見る

詳細情報 詳細情報について

問題の指摘

ページトップへ