1,10-Phenanthrolineを添加した1-ethyl-3-methylimidazolium chloride-AlCl<sub>3</sub>イオン液体中における光沢Alめっきの形成

書誌事項

タイトル別名
  • Formation of Gloss Al Electroplating in 1-ethyl-3-methylimidazolium chloride-AlCl<sub>3</sub> Ionic Liquid Containing 1,10-Phenanthroline
  • 1,10-Phenanthrolineを添加した1-ethyl-3-methylimidazolium chloride-AlCl₃イオン液体中における光沢Alめっきの形成
  • 1,10-Phenanthroline オ テンカ シタ 1-ethyl-3-methylimidazolium chloride-AlCl ₃ イオン エキタイ チュウ ニ オケル コウタク Alメッキ ノ ケイセイ

この論文をさがす

抄録

<p>To form glossy plating of Al on a Cu substrate, electroplating of Al was conducted in an ionic liquid mixture of 1-ethyl-3-methylimidazolium chloride and aluminum chloride (EMIC-AlCl3) containing 1,10-phenanthroline (Phen). The electroplated surface smoothness obtained using an Al-plate counter electrode was improved by stirring of the electrolyte. The reflectivity at the center of the specimen surface formed by a stirring rate of 400 rpm was the highest at 74.7% with stirring rates from 0 to 400 rpm and the reflectivity of the specimen was higher at the edge than at the center. The results suggest that the glossy surface of the substrate was enhanced by uniformity of the electrolyte in contact with the substrate. When the counter electrode was replaced with the Al mesh, the electroplated surface was glossy throughout the surface without stirring. Diffusion of the electrolyte through the Al mesh might have produced an effect similar to stirring of the electrolyte.</p>

収録刊行物

  • 表面技術

    表面技術 68 (4), 208-212, 2017

    一般社団法人 表面技術協会

被引用文献 (1)*注記

もっと見る

参考文献 (6)*注記

もっと見る

詳細情報 詳細情報について

問題の指摘

ページトップへ