Ti-22V-4Alにおける疲労き裂発生過程の観察

DOI Web Site

書誌事項

タイトル別名
  • Observation of fatigue crack initiation process in Ti-22V-4Al

抄録

<p>It is generally reported on titanium alloys that crack initiation occurs from a small flat plane called the “facet”. Thus, it is important to investigate facet formation processes in revealing the fatigue characteristics of titanium alloy. In the present work, β type titanium alloy Ti-22V-4Al was investigated in order to elucidate the fatigue crack initiation process. An axial load fatigue test was carried out with an etched specimen in order to examine the positional relationship between the microstructure and crack initiation site (in the grain or at the grain boundary). After the fatigue test, the fracture surface and the specimen surface were observed by using a scanning electron microscope. From the fracture surface observation, four crack propagation traces were observed on the fracture surface. When focusing on the crack initiation site, it was revealed that each crack initiated from a facet. Then, the facet angle was measured as the angle between the loading direction and the normal to the facet plane, which revealed that the shear stress largely contributed to crack initiation. The result of the specimen surface observation demonstrated that crack initiation occurred in β phase without α precipitate rather than at the β grain boundary. Therefore, in this sample material, crack initiated in β phase mainly by the shear stress.</p>

収録刊行物

キーワード

詳細情報 詳細情報について

問題の指摘

ページトップへ