3D プリンターと高速遠心成形法を組み合わせた ディーゼルノズルの製造－製造プロセスの改良－

DOI Web Site

書誌事項

タイトル別名
  • Fabrication of Multiple and Tapered Nozzle Holes for Diesel Engines by High-Speed Centrifugal Compaction Combined with Three-Dimensional Printed Cores, Part 1 - Development of Process -

抄録

<p>A new process method for net-shape formation of diesel nozzles was proposed. Resin cores of tapered spray holes (inwardly larger) were made by a three-dimensional printer, then they were buried in fine (2.6 μm) steel powder compacts by high-speed centrifugal compaction process. The green compacts were heated to eliminate resin cores, resin molds and binders by thermal decomposition, then, sintered at 1473 K. Crack formation during process, which was hardly avoidable by previous studies, were suppressed by changing process parameters especially of thermal decomposition process of resins. Densely and uniformly sintered nozzle tips obtained.</p>

収録刊行物

  • 年次大会

    年次大会 2016 (0), S0410104-, 2016

    一般社団法人 日本機械学会

キーワード

詳細情報 詳細情報について

問題の指摘

ページトップへ