書誌事項
- タイトル別名
-
- Fatigue Improvement of Titanium Alloy by Compound Peening Using Microshot and Ultrasonic Vibration
抄録
<p>The fatigue improvement of titanium alloy by microshot peening and ultrasonic peening was investigated. In the peening process, the equipment were used an air-type machine and ultrasonic peening machine. The microshot used were high-carbon cast steel with an average diameter of 0.1mm. The surface hardness data showed that, in the case of microshot peening, work hardening extended deeper than the mean diameter of the media. In addition, in the case of ultrasonic peening, the surface hardness increased slowly with the projection time. The rotary bending fatigue tests were carried at a frequency of 3150 cycles/min. Improvement of the fatigue strength was observed by both treatments.</p>
収録刊行物
-
- 関西支部講演会講演論文集
-
関西支部講演会講演論文集 2017.92 (0), 503-, 2017
一般社団法人 日本機械学会
- Tweet
詳細情報
-
- CRID
- 1390282680826668416
-
- NII論文ID
- 130007083295
-
- ISSN
- 24242756
-
- 本文言語コード
- ja
-
- データソース種別
-
- JaLC
- Crossref
- CiNii Articles
-
- 抄録ライセンスフラグ
- 使用不可