高速圧縮変形によるAl-Mg合金の結晶組織制御  [in Japanese] Modification of grain structure in Al-Mg alloys under dynamic compression load  [in Japanese]

Access this Article

Author(s)

Abstract

<p>For weight saving of the transportation equipment, aluminum alloy is widely used in place of steel as structure materials. In this study, we investigate the strengthening Al-Mg alloys by severe plastic deformation, since the alloying element of magnesium is one of the abundant elements. We carried out a high-speed compression examination for Al-4Mg and Al-4Mg-0.4Si (mass%) at 200, 300 °C and compared strength and deformation response. From experimental results, the Al-4Mg-0.4Si alloy showed the higher yield stress than Al-4Mg alloy. In addition, the strain hardening rate decreased with increasing temperature for all present alloys, and the value of the Al-4Mg-0.4Si alloy showed lower value than that of Al-4Mg alloy.</p>

Journal

  • The Proceedings of the Materials and Mechanics Conference

    The Proceedings of the Materials and Mechanics Conference 2016(0), PS-35, 2016

    The Japan Society of Mechanical Engineers

Codes

Page Top