Effects of polishing on surface roughness and hardness of glass-fiber-reinforced polypropylene
-
- TANIMOTO Yasuhiro
- Department of Dental Biomaterials, Nihon University School of Dentistry at Matsudo
-
- NAGAKURA Manamu
- Department of Dental Biomaterials, Nihon University School of Dentistry at Matsudo
Abstract
<p>Removable partial dentures (RPDs) with resin-clasp retentive parts, which are known as non-metal-clasp dentures (NMCDs), have been used as alternatives for conventional RPDs with metal clasp, in case of aesthetic prosthodontic treatments. In this study, a profilometer and dynamic micro-indentation tests were used to investigate the effects of polishing on the surface properties such as surface roughness (Ra), dynamic hardness, and elastic modulus of high-rigidity glass-fiber-reinforced thermoplastics (GFRTPs) composed of E-glass fibers and polypropylene for NMCDs. The Ra values of the GFRTPs after polishing were significantly lower than those before polishing. The values were close to the Ra threshold level of 0.2, which corresponds to an acceptable surface smoothness for denture base materials. Polishing did not significantly change the dynamic hardnesses and elastic moduli of the GFRTPs. The fiber loading did not greatly affect the micromechanical properties of the GFRTPs because the glass-fiber reinforcement is embedded in the polypropylene matrix.</p>
Journal
-
- Dental Materials Journal
-
Dental Materials Journal 37 (6), 1017-1022, 2018-11-27
The Japanese Society for Dental Materials and Devices