書誌事項
- タイトル別名
-
- Effect of shot peening on surface characteristics of stainless steel
抄録
<p>In the present study, the effects of projection conditions on the surface characteristics of stainless steel was investigated. In the peening process, the equipment were used an air-type machine and ultrasonic peening machine. The microshot media used were high-carbon cast with an average diameter of 0.1mm. The surface hardness data showed that, in the case of microshot peening, work hardening extended deeper than the mean diameter of the media. In addition, in the case of ultrasonic peening, the surface hardness increased slowly with the projection time. The rotary bending fatigue tests were carried at a frequency of 3150 cycles/min. Improvement of the fatigue strength was observed by both treatments. The higher effect was found in the ultrasonic peening treatment, because a work-hardened layer was formed deeper in the material.</p>
収録刊行物
-
- 年次大会
-
年次大会 2018 (0), G0400102-, 2018
一般社団法人 日本機械学会
- Tweet
詳細情報
-
- CRID
- 1390001288139710208
-
- NII論文ID
- 130007619091
-
- ISSN
- 24242667
-
- 本文言語コード
- ja
-
- データソース種別
-
- JaLC
- Crossref
- CiNii Articles
-
- 抄録ライセンスフラグ
- 使用不可