遷音速多段軸流圧縮機の静翼列流れ場における損失生成メカニズム

DOI Web Site

書誌事項

タイトル別名
  • Loss Production Mechanism in Stator Cascade Flow Field of a Multi-Stage Transonic Axial Compressor

抄録

<p>In this study, a multi-stage transonic axial compressor has been investigated using a large-scale detached eddy simulation (DES) with approximately 4.5 hundred million computational cells. The flow field was analyzed by data mining techniques including vortex identification based on the critical point theory and topological data analysis of the limiting streamline pattern visualized by the line integral convolution (LIC) method. The loss production was evaluated by entropy production rate. It is found that the hub-corner separation occurs on the suction side of the first stator. Although only one hub-corner separation vortex is formed in the time-averaged flow field, hub-corner separation vortex is generated in multiple pieces and those pieces interfere with each other in an instantaneous flow field. The hub-corner separation produces loss over a wide range. However, loss generation around the hub-corner separation vortex is small, and the main loss factor of loss production is the shear layer between the mainstream region and the separation region. In the rear part of the stator, huge loss is generated in the shearing layer between leakage vortex and leakage flow and between leakage vortex and secondary flow.</p>

収録刊行物

  • 年次大会

    年次大会 2018 (0), J0550201-, 2018

    一般社団法人 日本機械学会

キーワード

詳細情報 詳細情報について

問題の指摘

ページトップへ