カラーゲルデータベースを基にしたレサイプ決定システムの開発

DOI Web Site

書誌事項

タイトル別名
  • Development of recipe determination system based on color database

抄録

<p>The 3D gel printer Soft and Wet Industrial Materials・Easy Realizer (SWIM-ER) in our laboratory can only perform modeling with monochrome, so in this study we evaluated the physical properties of the color gel used in the full color 3D gel printer. In addition, it was possible to prepare color gels of various colors by mixing a plurality of color gel solutions using an automatic dispensing robot "Andrew". By this study, it was found that the addition of the surfactant dispersed the pigment and the fracture from the aggregated part was also improved. It was found that increasing the concentration of pigment decreased the brightness and increased the saturation. It was found that the concentration of pigment and the value of brightness are linear relationship, and also the concentration of pigment and the value of saturation are linear relationship, too. The neutral color gels got by mixing two pigments. In addition, although it was possible to prepare a color gel pallet using Andrew, it is necessary to study the stirring and removal method of microtubes after dispensing in the future. If we can obtain some sample data of color gel, we would like to construct 3D gel printer system. After that, we plan to develop the main body of the device. Particularly because nozzles etc. need to be devised, it seems necessary to devise a concept more carefully.</p>

収録刊行物

キーワード

詳細情報 詳細情報について

問題の指摘

ページトップへ