任意の荷重条件下における塑性誘起閉口を考慮した疲労き裂進展解析（重合メッシュ法を活用した直接数値シミュレーションおよび簡易手法の提案）

• 新宅 勇一

  筑波大学システム情報系

• 篠崎 勇人

  東京理科大学大学院　理工学研究科

• 藤原 宇希

  東京理科大学大学院　理工学研究科

• 高橋 昭如

  東京理科大学　理工学部

• 菊池 正紀

  日本原子力研究開発機構

書誌事項

タイトル別名

• Numerical simulation of fatigue crack propagation with plasticity-induced crack closure under different loading conditions (Development of direct numerical simulation using S-version FEM and simplified method)

抄録

This paper presents two numerical simulation methods for fatigue crack propagations with the plasticity-induced crack closure under arbitrary cyclic loading conditions. One of the methods is Direct Numerical Simulation (DNS) using S-version Finite Element Method (SFEM), which allows us to simulate the fatigue crack propagation by the combination of the global mesh representing whole structure and local meshes including cracks. Crack opening level due to the plasticity-induced crack closure is evaluated by the elastic-plastic analyses with the local mesh, which is used in the SFEM analyses and is rearranged to simulate the small size of plastic zone around crack tip. The crack growth rate affected by the plasticity-induced crack closure is calculated by a modified Paris ’law in which the stress intensity factor range is converted into an effective stress intensity factor range by multiplying the crack opening level. The crack shape is updated by the crack growth rate, and then, the local mesh is reconstructed in accordance with the updated crack shape. By repeating the processes, the developed method enables us simulating directly the fatigue crack propagation with the plasticity-induced crack closure effect. Another method is a simplified fatigue crack propagation analysis method, where the effective stress intensity factor range is approximately determined by the relationship between the maximum stress intensity factor and the crack opening level. The relationship is constructed in advance using a series of two-dimensional DNSs. The comparison with experimental results confirms that the developed methods have a capability to predict the propagation of surface cracks under bending and tensile loading conditions.

収録刊行物

• 日本機械学会論文集

  日本機械学会論文集 85 (876), 19-00141-19-00141, 2019

  一般社団法人 日本機械学会

キーワード

• Crack closure effect
• Plasticity-induced crack closure
• Fatigue crack propagation
• Direct numerical simulation
• S-version FEM

詳細情報

• CRID: 1390282763135193472
• NII論文ID: 130007695497
• DOI: 10.1299/transjsme.19-00141
• ISSN: 21879761
• Web Site: https://www.jstage.jst.go.jp/article/transjsme/85/876/85_19-00141/_pdf
• 本文言語コード: ja
• データソース種別:
  • JaLC
  • Crossref
  • CiNii Articles
  • KAKEN
• 抄録ライセンスフラグ: 使用不可