二次イオン質量分析法によるα鉄中のホウ素の拡散浸透プロファイルの測定と拡散係数の決定

  • 濱名 桂佑
    大阪府立大学大学院工学研究科マテリアル工学分野
  • 仲村 龍介
    大阪府立大学大学院工学研究科マテリアル工学分野
  • 沼倉 宏
    大阪府立大学大学院工学研究科マテリアル工学分野
  • 鈴木 健之
    大阪大学産業科学研究所

書誌事項

タイトル別名
  • Measurement of Diffusion Profile of Boron in α Iron by Secondary-ion Mass Spectrometry and Determination of Its Diffusion Coefficient
  • ニジ イオン シツリョウ ブンセキホウ ニ ヨル aテツ チュウ ノ ホウソ ノ カクサン シントウ プロファイル ノ ソクテイ ト カクサン ケイスウ ノ ケッテイ

この論文をさがす

抄録

<p>We report an attempt to determine the diffusion coefficient of B in α Iron by measuring the penetration profile by means of secondary-ion mass spectrometry (SIMS). Pure iron plates of grain-size of 1 to 3 mm were prepared, and thin films of Fe-B alloy (200 nm) and alumina (50 nm) were deposited on the surface as a B source and a capping layer, respectively. The samples were subjected to diffusion annealing at 700ºC, 800ºC, and 900ºC for certain periods of time, and the intensity of secondary ions of B was measured as a function of depth by SIMS. The mesa method was employed, in which a groove is prepared first around the target area by sputtering, and then the depth profile of B through the inner pillar was obtained. The concentration profiles thus obtained were analysed with the thin-film solution, the error-function solution, and also using Hall’s method, depending on the form of the profile. The diffusion coefficient was of the order of 10–18 m2 s–1 in all the cases, which is seven to eight orders of magnitude smaller than those evaluated from deboronising experiments in the 1950 s, but is close to recent theoretical prediction for substitutional diffusion.</p>

収録刊行物

  • 鉄と鋼

    鉄と鋼 106 (6), 302-309, 2020

    一般社団法人 日本鉄鋼協会

被引用文献 (1)*注記

もっと見る

参考文献 (20)*注記

もっと見る

詳細情報 詳細情報について

問題の指摘

ページトップへ