Al-Fe合金における加工軟化現象の起源:<i>θ</i>-Al<sub>13</sub>Fe<sub>4</sub>相による不純物スカベンジング効果
書誌事項
- タイトル別名
-
- Work Softening Phenomena in Al-Fe Alloys: the Impurity-Scavenging Effect of the <i>θ</i>-Al<sub>13</sub>Fe<sub>4</sub> Phase
- Al-Fe合金における加工軟化現象の起源 : θ-Al₁₃Fe₄相による不純物スカベンジング効果
- Al-Fe ゴウキン ニ オケル カコウ ナンカ ゲンショウ ノ キゲン : th-Al ₁ ₃ Fe ₄ ソウ ニ ヨル フジュンブツ スカベンジング コウカ
この論文をさがす
抄録
<p>We have investigated the work softening (WS) phenomena during a cold-roll process of an Al-Fe alloy, based on hardness measurements, electron microscopy observations, and thermodynamic calculations. The WS behavior was confirmed in the Al-Fe alloy when the rolling rate was larger than 80%, which contained fine grains with severe deformation. In contrast, the behavior and microstructural features were hardly observed in the A1050 alloy. Composition analyses showed that almost all Fe in the present Al-Fe alloy form the θ-Al13Fe4 phase, in which a trace impurity element, Si, is found to be significantly segregated. This Si partitioning behavior is confirmed by the thermodynamic calculations and consequently leads to a higher purification of the relevant Al matrix as being almost close to the 4N (99.99 mol%) level, known as a “scavenging effect” of the impurities. It can be concluded that the highly purified aluminum matrix provides an intrinsic origin of the WS of the present Al-Fe alloy. Significant reductions of the impurities may lead to an extended mean-free path of dislocation motions and related grain boundary effects, which promote the occurrence of dynamic recovery and/or recrystallizations at severe deformation ranges even during the cold-roll process.</p>
収録刊行物
-
- 日本金属学会誌
-
日本金属学会誌 84 (12), 406-412, 2020-12-01
公益社団法人 日本金属学会
- Tweet
キーワード
詳細情報 詳細情報について
-
- CRID
- 1390567901489333248
-
- NII論文ID
- 130007942368
-
- NII書誌ID
- AN00187860
-
- ISSN
- 18806880
- 24337501
- 00214876
-
- NDL書誌ID
- 030803661
-
- 本文言語コード
- ja
-
- データソース種別
-
- JaLC
- NDL
- Crossref
- CiNii Articles
- KAKEN
-
- 抄録ライセンスフラグ
- 使用不可