Texture Formation through Thermomechanical Treatment and Its Effect on Superelasticity in Mg–Sc Shape Memory Alloy

  • Yamagishi Keisuke
    Department of Materials Science, Graduate School of Engineering, Tohoku University
  • Ando Daisuke
    Department of Materials Science, Graduate School of Engineering, Tohoku University
  • Sutou Yuji
    Department of Materials Science, Graduate School of Engineering, Tohoku University
  • Ogawa Yukiko
    Research Center for Structural Materials, National Institute for Materials Science

この論文をさがす

抄録

<p>The formation of texture through thermomechanical treatment was investigated in Mg–18.8 at% Sc shape memory alloy to enhance its superelasticity at room temperature. The samples were cold rolled in an α phase or in a β phase and then finally heat treated at 690°C followed by water quenching to obtain a β phase. In the case of cold rolling in the α phase, a basal-plane texture was formed, while no preferential texture was observed along in-plane direction. After the final heat treatment, {011}⟨uvw⟩β transformation texture was obtained, according to Burgers relationship, indicating no improvement of the superelasticity along in-plane direction. In the case of the cold rolling in the β phase, a weak {111}⟨011⟩β recrystallization texture was obtained. The sample showed about 0.65% superelastic tensile strain along rolling direction, while that along transverse direction (//∼⟨113⟩β) showed only about 0.43%. This trend is in good agreement with the orientation dependence of the transformation strain, but, the obtained superelastic strain was much lower than the expected value, which is due to the weak texture and suggests the existence of a strong grain constraint in the Mg–Sc shape memory alloy.</p><p> </p><p>This Paper was Originally Published in Japanese in J. Japan Inst. Met. Mater. 84 (2020) 253–259.</p>

収録刊行物

  • MATERIALS TRANSACTIONS

    MATERIALS TRANSACTIONS 61 (12), 2270-2275, 2020-12-01

    公益社団法人 日本金属学会

被引用文献 (5)*注記

もっと見る

参考文献 (26)*注記

もっと見る

関連プロジェクト

もっと見る

詳細情報 詳細情報について

問題の指摘

ページトップへ