表面処理を施した金属とゴムの異材接合に対する充填剤の影響

DOI Web Site

書誌事項

タイトル別名
  • Effect of filler on dissimilar materials joining between surface-treated metal and rubber

抄録

<p>An aluminum alloy surface-treated with pure water was directly joined to a rubber containing different fillers to prepare a dissimilar materials joint. In order to study effect of filler on joint strength and joint state, a peeling test and observation for aluminum alloy surface before and after joining were performed in the dissimilar materials joints. There was a difference in the joining strength of the dissimilar materials joint depending on added filler. Microstructure formed by the surface treatment remained on the aluminum alloy surface in dissimilar materials joints after the peeling test, however its morphology was different depending on added filler. Therefore, it is speculated that the filler influences the surface morphology and results in different joining strength.</p>

収録刊行物

  • 年次大会

    年次大会 2020 (0), J04204-, 2020

    一般社団法人 日本機械学会

キーワード

詳細情報 詳細情報について

問題の指摘

ページトップへ