フロー試験によるセメントペーストのレオロジー定数推定法に関する研究

• 東舟道 裕亮

  琉球大学大学院理工学研究科

• 山田 義智

  琉球大学工学部工学科

書誌事項

タイトル別名

• STUDY ON THE RHEOLOGICAL CONSTANTS ESTIMATION METHOD OF CEMENT PASTE BY FLOW TEST

抄録

With the improvement of earthquake resistance and large scale of buildings, the number of cases where it is difficult to fill the form work with conventional slump-managed concrete is increasing. In addition, slump flows 45 cm, 50 cm, 55 cm, and 60 cm have been added due to the JIS (Japanese industrial standard) revision made in March 2019. In the future, it is estimated that the use of slump flow managed concrete will increase. Furthermore, in recent years, new admixtures have been actively developed, and it is necessary to correctly grasp the flow characteristics of concrete using these admixtures from a rheological point of view. It is the cement paste in concrete that is most affected by the flow properties of the admixture. Therefore, it is useful to be able to grasp the flow characteristics of cement paste. We have already examined the relationship between the rheology constants obtained from the rheology test and the flow characteristics obtained from the paste flow test, and we proposed a rheology constant estimation method. In this study, we reexamined the rheological constant estimation method based on the correlation analysis findings using the visco-plastic finite element method (FEM). First, flow analysis was performed by FEM using any combination of rheological constant and paste density (yield stress: 10 patterns, plastic viscosity: 7 patterns, paste density: 3 patterns, total 210 patterns) as input values. Next, based on the analysis results, the relationship between the paste flow characteristics (flow value, each flow arrival time, flow stop time) and the rheology constant and paste density was examined by correlation analysis. As a result, it was found that the yield stress can be estimated by the flow value, and the plastic viscosity can be estimated by the multiple regression equation of the paste density and the 150 mm flow arrival time. Furthermore, we proposed a new rheological constant estimation equation using the actual test results of the cement paste for the relationship obtained from the correlation analysis. After that, the rheology constant was estimated from the actual paste flow test results using the rheology constant estimation equation. Finally, a paste flow simulation was performed using the MPS method, which can consider the influence of the flow cone, and it was compared and examined: the actual paste flow test results and MPS analysis results. As a result, the actual paste flow test results could be reproduced by MPS analysis, and the validity of the rheological constant equation was confirmed.

収録刊行物

• 日本建築学会構造系論文集

  日本建築学会構造系論文集 86 (784), 860-870, 2021-06-30

  日本建築学会

キーワード

• セメントペースト
• ペーストフロー試験
• レオロジー定数
• 粘塑性有限要素法
• MPS法

詳細情報

• CRID: 1390288535620293888
• NII論文ID: 130008058811
• NII書誌ID: AN10438559
• DOI: 10.3130/aijs.86.860
• ISSN: 18818153
• ISSN: 13404202
• Web Site: https://www.jstage.jst.go.jp/article/aijs/86/784/86_860/_pdf
• 本文言語コード: ja
• データソース種別:
  • JaLC
  • Crossref
  • CiNii Articles
  • KAKEN
• 抄録ライセンスフラグ: 使用不可