Evaluation of the marginal accuracy of different all‐ceramic crown systems after simulation in the artificial mouth

抄録

<jats:p><jats:bold>The <jats:italic>in</jats:italic><jats:italic>vitro</jats:italic> marginal fit of five different all‐ceramic crown systems (In‐Ceram®, Empress® staining technique, Empress® veneering technique, Celay® feldspathic system, Celay In‐Ceram® system) was evaluated before and after cyclic preloading in an artificial mouth. The crowns were adhesively luted to extracted natural maxillary incisors prepared with a 90° shoulder. The results were compared to those for porcelain‐fused‐to‐metal (PFM) crowns with circular porcelain‐butt margins which were cemented with zinc phosphate cement. The analysis of the marginal discrepancies showed significant (<jats:italic>P</jats:italic>≪0·001) differences among the groups. Crown cementation increased the marginal gaps significantly (<jats:italic>P</jats:italic>≪0·01). Empress® staining technique crowns showed the smallest marginal gaps (median 47 μm), followed by conventional In‐Ceram® crowns (median 60 μm) and Empress® veneer technique crowns (median 62 μm). Celay In‐Ceram® crowns displayed marginal openings with a median of 78 μm, followed by Celay® feldspathic crowns with a median of 99 μm. The marginal gap of the PFM control crowns showed a median of 64 μm. Ageing in the chewing simulator had no significant influence on the marginal fit of all specimens. The study indicates that all the tested all‐ceramic crowns have clinically acceptable margins. However, <jats:italic>in vivo</jats:italic> investigations of all all‐ceramic crown systems should be made before clinical routine.</jats:bold></jats:p>

収録刊行物

被引用文献 (12)*注記

もっと見る

キーワード

詳細情報

問題の指摘

ページトップへ