コンベヤー光加熱による異種合金ポーラスアルミニウムの連続作製

DOI Web Site Web Site 被引用文献1件 参考文献5件

書誌事項

タイトル別名
  • Continuous production of dissimilar alloy porous aluminum by conveyor with optical heating
  • コンベヤー ヒカリ カネツ ニ ヨル イシュ ゴウキン ポーラスアルミニウム ノ レンゾク サクセイ

この論文をさがす

抄録

<p>Porous aluminum is multifunctional metal materials with light weight and high energy absorption properties. In our previous study, it was shown that continuously production of same alloy porous aluminum by continuously foaming of precursors using a conveyor with optical heating was possible. In this study, continuously foaming of dissimilar alloy precursors on same line was investigated. It is difficult to foam dissimilar alloy precursors on same line because their liquidus temperatures are different. So each heat input of precursor was adjusted by changing distance between precursor and halogen lamps. Two types of precursors, commercially pure aluminum (A1050) and die-casting aluminum alloy (ADC12), were fabricated via the friction stir welding route. Continuously production of dissimilar alloy porous aluminums was carried out by passing of precursors below heating area of halogen lamps. It was found that different alloy aluminum precursors can be continuously foamed on the same line. The obtained porous aluminum had porosity with approximately 80% and good pore structures.</p>

収録刊行物

  • 軽金属

    軽金属 71 (4), 177-179, 2021-04-15

    一般社団法人 軽金属学会

被引用文献 (1)*注記

もっと見る

参考文献 (5)*注記

もっと見る

キーワード

詳細情報 詳細情報について

問題の指摘

ページトップへ