Steam-injection pressing technology for particleboard production and its application to continuous press 蒸気噴射プレスによるパーティクルボードの製造技術とその連続プレスへの応用
Access this Article
Search this Article
Author
Bibliographic Information
- Title
-
Steam-injection pressing technology for particleboard production and its application to continuous press
- Other Title
-
蒸気噴射プレスによるパーティクルボードの製造技術とその連続プレスへの応用
- Author
-
Bambang Subiyanto
- Author(Another name)
-
バンバン スビヤント
- University
-
京都大学
- Types of degree
-
農学博士
- Grant ID
-
甲第4826号
- Degree year
-
1991-03-23
Note and Description
博士論文
Table of Contents
- 論文目録 / (0001.jp2)
- CONTENTS / (0007.jp2)
- INTRODUCTION / p1 (0009.jp2)
- CHAPTER 1. CURING OF PARTICLEBOARD ADHESIVES / p5 (0013.jp2)
- 1.1 Background / p5 (0013.jp2)
- 1.2 Effect of environmental temperature and adhesive temperature on curing time / p7 (0015.jp2)
- 1.3 Curing of adhesives under high steam pressures or temperatures / p14 (0022.jp2)
- 1.4 Optimum conditions of curing adhesives in steam-injection pressing of particleboard. / p23 (0031.jp2)
- CHAPTER 2. BASIC RESEARCH ON PRODUCTION TECHNOLOGY OF PARTICLEBOARD WITH STEAM-INJECTION PRESSING / p38 (0046.jp2)
- 2.1 Background / p38 (0046.jp2)
- 2.2 Temperature behavior in particle mat during steam-injection pressing / p47 (0055.jp2)
- 2.3 Effect of steam-injection time and timing on particleboard properties / p55 (0063.jp2)
- 2.4 Shortening press cycle with steam-injection pressing / p68 (0076.jp2)
- CHAPTER 3. PRODUCTION TECHNOLOGY OF PARTICLEBOARD USING A SEMI-CONTINUOUS STEAM-INJECTION PRESS OF TEST PLANT SCALE / p75 (0083.jp2)
- 3.1 Background / p75 (0083.jp2)
- 3.2 Trial set-up of semi continuous (intermittent) press with steam-injection from hot-platen surfaces and the temperature distribution within the mat / p77 (0085.jp2)
- 3.3 Production of thick low-density particleboard with a semi-continuous steam-injection press / p92 (0100.jp2)
- CONCLUSION / p106 (0114.jp2)
- ACKNOWLEDGEMENT / p111 (0119.jp2)
- REFERENCES / p112 (0120.jp2)