Development of a high performance laser-guided deep-hole boring tool for practical use 実用型高性能レーザ誘導方式深穴加工工具の開発
この論文にアクセスする
この論文をさがす
著者
書誌事項
- タイトル
-
Development of a high performance laser-guided deep-hole boring tool for practical use
- タイトル別名
-
実用型高性能レーザ誘導方式深穴加工工具の開発
- 著者名
-
Thiele, Dirk
- 著者別名
-
ティーレ, ディルク
- 学位授与大学
-
九州大学
- 取得学位
-
博士 (工学)
- 学位授与番号
-
甲第5081号
- 学位授与年月日
-
2000-03-27
注記・抄録
博士論文
目次
- Contents / p1 (0003.jp2)
- I Introduction / p1 (0009.jp2)
- 1.1 Deep-hole drilling / p1 (0009.jp2)
- 1.2 Deep-hole boring following a target / p2 (0010.jp2)
- 1.3 Goal of this research / p4 (0012.jp2)
- 2 Laser-guided deep-hole boring / p5 (0013.jp2)
- 2.1 Background / p5 (0013.jp2)
- 2.2 Experimental apparatus / p6 (0014.jp2)
- 2.3 Experiments / p14 (0022.jp2)
- 3 Improving the accuracy and increasing the boring depth / p25 (0033.jp2)
- 3.1 Improvement of guiding accuracy / p25 (0033.jp2)
- 3.2Extending the boring depth / p31 (0039.jp2)
- 4 Investigation for development of new tools / p39 (0047.jp2)
- 4.1 Necessity of experiments / p39 (0047.jp2)
- 4.2 Cutting forces / p40 (0048.jp2)
- 4.3Chip discharge / p46 (0054.jp2)
- 4.4 Mechanical influence of the boring bar on tool steering / p53 (0061.jp2)
- 4.5 Results of model experiments / p55 (0063.jp2)
- 5 Design of a deep-hole boring tool for practical use / p57 (0065.jp2)
- 5.1 Requirements of deep-hole boring tool for practical use / p57 (0065.jp2)
- 5.2 Design of the tool / p58 (0066.jp2)
- 5.3 New optical system / p66 (0074.jp2)
- 5.4 Design of an active rotation stopper / p68 (0076.jp2)
- 5.5 Construction of the new tool / p70 (0078.jp2)
- 6 Design of a deep-hole boring robot / p72 (0080.jp2)
- 6.1 Requirements of deep-hole boring robot / p72 (0080.jp2)
- 6.2 Design of the robot / p73 (0081.jp2)
- 6.3 Feeding system / p76 (0084.jp2)
- 7 Conclusion / p85 (0093.jp2)
- Acknowledgments / p88 (0096.jp2)
- References / p89 (0097.jp2)