CRTD
Bibliographic Information
CRTD
The American Society of Mechanical Engineers
Search this Book/Journal
Related Books： 1-18 of 18
-
1
- Screw-thread gaging systems for determining conformance to thread standards
-
prepared by Steering Committee on "Screw-Thread Gaging Systems" for the ASME Center for Research and Technology Development ; Leroy S. "Skip" Fletcher, chair
American Society of Mechanical Engineers c1996 CRTD vol. 37
Available at 2 libraries
-
2
- A practical guide to avoiding steam purity problems in the industrial plant : an ASME research report
-
prepared by the Feedwater Quality Task Group
American Society of Mechanical Engineers, c1995 CRTD Vol. 35
Available at 1 libraries
-
3
- Fossil fuel-fired electric power generating station applications
-
prepared by the Research Task Force on Risk-Based Inspection Guidelines ; appointed by the Codes and Standards Research Planning Committee of the ASME Center for Research and Technology Development for the ASME Council on Codes and Standards ... [et al.] ; reviewed and edited by Steering Committee on Risk-Based Inspection Guidelines and an Independent Peer Review Committee
American Society of Mechanical Engineers c1994 CRTD 20 . Risk-based inspection : development of guidelines ; 3
Available at 1 libraries
-
4
- Tribology in manufacturing processes : a joint publication of papers presented at Symposium on Tribology in Manufacturing : ASME/STLE Tribology Conference, Lahaina, Maui, Hawaii, October 16-19, 1994 and Symposium on Tribology in Manufacturing Processes : 1994 International Mechanical Engineering Congress and Exposition, Chicago, Illinois, November 6-11, 1994
-
sponsored by Research Committee on Tribology, ASME Center for Research and Technology Development, Tribology and Production Engineering Divisions, ASME ; edited by K. Dohda ... [et al.]
American Society of Mechanical Engineers c1994 CRTD vol. 30 , TRIB vol. 5 , PED vol. 69
Available at 1 libraries
-
5
- An evaluation of the cost of incinerating wastes containing PVC
-
prepared by D. Randall, S. Shoraka-Blair ; under the direction of Subcommittee in Incineration of Wastes Containing PVC, ASME Research Committee on Industrial and Municipal Wastes ; reviewed and approved by ASME Research Committee on Industrial and Municipal Wastes
American Society of Mechanical Engineers c1994 CRTD Vol. 31
Available at 1 libraries
-
6
- Research guidelines for aluminum product applications in transportation and industry : metal matrix composites, advanced aluminum forming processes, laminated structures, and ASME workshop held at Clearwater, Florida, May 3-5, 1993
-
sponsored by the U.S. Department of energy - Office of Transportation Technologies ; authored by D. Weissman-Berman ; edited by E. Hay
American Society of Mechanical Engineers c1994 CRTD Vol. 29
Available at 1 libraries
-
7
- ASME/U.S. Bureau of Mines investigative program report on vitrification of residue (ASH) from municipal waste combustion systems
-
prepared by L.L. Oden, W.K. O'Connor ; project managed by ASME Research Committee on Industrial and Municipal Wastes, Subcommittee on Ash Vitrification
American Society of Mechanical Engineers c1994 CRTD Vol. 24
Available at 1 libraries
-
8
- Research needs and opportunities in friction : report of the workshop on Friction
-
sponsored by the National Science Foundation ; transcribed from the reports of the session chairmen by Traugott E. Fischer
American Society of Mechanical Engineers c1994 CRTD Vol. 28
Available at 1 libraries
-
9
- Proceedings of the 1993 International Forum on Dimensional Tolerancing and Metrology : presented at the 1993 International Forum on Dimensional Tolerancing and Metrology, Dearborn, Michigan, JUne 17-19, 1993
-
sponsored by ASME ... [et al] ; edited by V. Srinivasan, H.B. Voelcker
American Society of Mechanical Engineers c1993 CRTD Vol. 27
Available at 1 libraries
-
10
- Installation of plastic gas pipeline across bridges : final report research in support of petition for rule change to ANSI/GPTC Z380
-
prepared by ASME Gas Pipeline Safety Research Committee
American Society of Mechanical Engineers c1993 CRTD Vol. 25
Available at 1 libraries
-
11
- Lubrication technology for advanced engines : an assessment of industrial needs
-
prepared by S. M. Hsu, M. Peterson
American Society of Mechanical Engineers c1993 CRTD Vol. 26
Available at 1 libraries
-
12
- Light water reactor (LWR) nuclear power plant components
-
prepared by the Research Task Force on Risk-Based Inspection Guidelines ; appointed by the Codes and Standards Research Planning Committee of the ASME Center for Research and Technology Development for the ASME Council on Codes and Standards ... [et al.] ; reviewed and edited by Steering Committee on Risk-Based Inspection Guidelines and an Independent Peer Review Committee
American Society of Mechanical Engineers c1992 CRTD 20 . Risk-based inspection : development of guidelines ; 2
Available at 1 libraries
-
13
- Mathematization of dimensioning and tolerancing
-
prepared by Y14.5.1 Subcommittee under the auspices of the ASME Board on Research and Technology Development for the U.S. National Science Foundation
American Society of Mechanical Engineers c1992 CRTD 15-2
Available at 1 libraries
-
14
- Selected case studies in the use of tolerance and deviation information during design of representative industrial products
-
prepared by Vijay A. Tipnis under the auspices of the ASME Board on Research for the U.S. National Science Foundation, Design and Manufacturing Systems Division under NSF grant DDM 90-00383
American Society of Mechanical Engineers c1992 CRTD 15-1
Available at 1 libraries
-
15
- Mining workshop for nuclear waste cleanup, held at Colorado Springs, Colorado, January 24-25, 1991
-
U.D. Department of Energy ; co-sponsored by the Mining and Excavation Research Institute, ASME, U.S. Bureau of Mines, Colorado Center of Engironmental Management ; with participation by American Mining Congress, American Society of Civil Engineers, Society for Mining, Metallurgy, and Exploration, Inc.
American Society of Mechanical Engineers c1991 CRTD 22
Available at 1 libraries
-
16
- General document
-
prepared by the Research Task Force on Risk-Based Inspection Guidelines ; appointed by the Codes and Standards Research Planning Committee of the ASME Center for Research and Technology Development for the ASME Council on Codes and Standards ... [et al.] ; reviewed and edited by Steering Committee on Risk-Based Inspection Guidelines and an Independent Peer Review Committee
American Society of Mechanical Engineers c1991 CRTD 20 . Risk-based inspection : development of guidelines ; 1
Available at 2 libraries
-
17
- Engineering Fluid Mechanics Workshop report
-
sponsored by the Center for Research and Technology Development ; supported by the National Science Foundation, Fluid Mechanics/Hydraulics Program ; edited and prepared by Norman Brooks ... [et al.]
American Society of Mechanical Engineers c1990 CRTD 16
Available at 1 libraries
-
18
- ASME Ash Fusion Research Project
-
prepared by D.C. Hough ; approved by A. Sanyal for the American Society of Mechanical Engineers, Research Committee on Corrosion and Deposits ; edited by D.G. Davis
ASME c1990 CRTD 18
Available at 1 libraries