ICOTOM-10 : proceedings of the 10th International Conference on Textures of Materials, Clausthal, Germany, 20-24 September 1993

著者

• International Conference on Textures of Materials
• Bunge, H.-J. (Hans Joachim)

書誌事項

ICOTOM-10 : proceedings of the 10th International Conference on Textures of Materials, Clausthal, Germany, 20-24 September 1993

edited by H. J. Bung

（Materials science forum, v. 157-162）

Trans Tech Publications, c1994

• pt. 1
• pt. 2

注記

Includes bibliographical refernces and indexes

内容説明・目次

内容説明

This book reflects quite clearly the expansion of the field of "textures" as well as the rapid growth of the texture community. During the recent years, the scope of this field has been expanded to virtually all crystalline and even partly crystalline materials including intermetallic compounds, ceramics, polymers as well as multiphase composites and even fullerenes.

目次

A Historical Survey of Texture Development between ICOTOM-1 and ICOTOM-10 Statistical Crystallography of the Polycrystal Orientation Imaging Microscopy: New Possibilities for Microstructural Investigations Using Automated BKD Analysis Textures in Ceramic Materials Texture Analysis by Neutron Diffraction Advanced Experimental Techniques in X-Ray Texture Analysis Quantitative Texture Analysis of Thin Polycrystalline Layers An Experimental Apparatus for Quantitative On-Line Texture Analysis Investigation of Inhomogeneous Textures of Coatings and Near-Surface-Layers A New Method for Texture Measurement Based on an X-Ray Imaging Plate System X-Ray Method for Continuous Tracking of Grain Boundary Motion: Investigation of Grain Boundary Migration in Al-Bicrystals A High-Pressure Device for In-Situ Measurements in a Neutron Beam Electronmicrodiffraction (EBSP) in the Scanning Electron Microscope (SEM): Further Hardware Development to Improve Pattern Quality A High Resolution Electron Diffraction Method for On-Line Texture Analysis Automatic Recognition of Deformed and Recrystallized Regions in Partly Recrystallized Samples Using Electron Back Scattering Patterns Optimization of the Texture Determination of Thin Films from X-Ray Diffraction Measurements Determination of Texture in CuZnAl Shape Memory Alloys in the High Temperature Austenitic Phase Orientation Connectivity in Polycrystals High Temperature Texture Goniometer for the Measurement of Transformation Textures A CCD Camera System for the Acquisition of Backscatter Kikuchi Patterns on an SEM An Inexpensive CCD Camera System for the Recording and On-Line Interpretation of TEM Kikuchi Patterns On-Line Interpretation of SAD Channeling Patterns Preparation of High-Resistance or Sensitive Samples for Grain Orientation Measurement with Electron Microscopes Equipment for Texture Measurement in Thin Films Application of the Method for Non-Destructive Evaluation of Texture Heterogeneity Influence of Texture on Backscattered Ultrasonic Noise Characterisation of Multilayers Crystallographic Texture Determination of the Texture of a TiNi Shape Memory Alloy by Treatment of a Set of Overlapping Rays On-Line Determination of Deformation Systems for Cubic and Hexagonal Materials with the TEM On-line Interpretation of Spot and Kikuchi Patterns Determination of Magnetic Textures in Ferromagnetics by Means of Neutron Diffraction Statistics, Evaluation and Representation of Single Grain Orientation Measurements Experimental Errors in Quantitative Texture Analysis from Diffraction Pole Figures Coordinate Free Tensorial Representation of N-Point Correlation Functions for Microstructure by Harmonic Polynomials Ultrasonic Characterization of the Texture of Aluminum Alloys Some Comments about Texture Analysis: Comparison between Harmonic and Vector Methods Texture of High Temperature Deformed - 2 Titanium Aluminides Practical Considerations in the Calculation of Orientation Distribution Functions from Electron Back-Scattered Diffraction Patterns Approximation of Orientation Distribution of Grains in Polycrystalline Samples by Means of Gaussians Automatic Quantitative Analysis of Texture Components from CODF Data ODF Analysis and Physical Properties on Personal Computer Basis Series Expansion and Positivity Variation Width, Modeling Assumptions and Interpretation of ODFs from Diffraction PDFs Texture Analysis from Diffraction Pole Figures of Structurally Inhomogeneous Polycrystals Some Applications of the Texture Component Model Orientation Representation on the 4-D Unit Sphere, the Analogon of the 3-D Pole Sphere Estimate the Grain Number for True ODF Determination by Individual Orientation Detecting Method Absorption Correction for Non-Standard Geometry for Pole Figure Measurements Approximation of the ODF by Gaussians for Sharp Textures Numerical Economization of the Series Method The ODF Calculation from Pole Figures for Different Types of Crystal and Sample Symmetries Statistical Analysis of Single Grain Orientation Data Generated from Model Textures Analysis of the ADC Method for Direct ODF Calculation by Use of Gauss Models and Standard Functions Inverse Formulas for Orientation Distribution Function Analogy and Duality of Quantitative Texture Analysis by Harmonic or Indicator Functions Exploratory Orientation Data Analysis: Kernel Density Estimation and Clustering Methods for Determining Small Differences between Measured Textures Linear Regression for Texture Comparison Smoothing Pole Figures Using Tensor Products of Trigonometric and Polynomial Splines Direct Correspondence between the Volumic Fractions Found by Texture Analysis with the Vector Method and the Harmonic Method and Inverse Correspondence Quantitative Texture Analysis with the Vector Method, Using Pole Figures of Rays and a Set of Overlapping Rays Texture Analysis from Diffraction Spectra Display of the ODF by an Image Analyzer PC Program for the Calculation of ODF from SAD Pole Figures or from Individual Grain Orientations A Computer Program for Determining Volume Fractions of Texture Components in Cubic Materials Development of Microtextures in Cold Rolled Iron-Oligocrystals Texture Analysis in the Monoclinic Martensitic Phase of a CuZnAl Shape Memory Alloy Texture and Phase Development in Al-40at% Ni Composites Oxidation of Titanium, Zirconium and their Alloys, Texture of their Oxide Scales Texture Analysis of an Amphibolite Using the Component Method Changes in Texture by Irradiation with Ar++ of Iridium and Platinum Layers on Oriented Sapphire Substrates Cube Texture in Aluminum Single Crystal of a (118)[711] Orientation Texture Competition in Solidification Process Texture of Al-7%Si Ingots Texture Transformation due to Martensitic Phase Transformation in CuZnAl Shape Memory Alloys Effect of Phosphorous on the Development of Textures in Ti-Stabilized Steel Sheets Describing the Rolling Texture in Very Low Stacking Fault Energy Alloys Deformation Texture Formation from Single Crystals Rolling and Annealing Textures of BCC Metals Study of the Texture of Steelcord during the Wet Drawing Process - Influence of the Patenting and the Friction on the Dies The Effects of the Cold Rolling Process on the Texture of Zircaloy-4 Sheets Texture and Microstructure of Channel-Die Deformed Aluminum Bicrystals with S Orientations Pb Texture of Pb-Al Composites Determined by the Iterative Series Expansion Method and the Component Method Plane Strain Compression of Titanium Crystals Development of Orientation and Damage during the Plastic Deformation of Semicrystalline Polyoxymethylene Correlation between Texture and Dislocation Structure in Deformed Metals On the Inhomogeneous Rolling Texture Transition The Development of Deformation Textures as a Function of the Phase Fractions in Two-Phase Titanium-Based Alloys Influence of the Rolling Temperature on the Texture Gradient in an Al-Mg-Si Alloy Rolling Texture Development in Cu-Mn-Alloys Texture Development in Extruded Al-Cu Composites Textural and Microstructural Evolution during Cold-Rolling of Pure Nickel Circular Texture in Thin Wires Textures of Rolled and Wire Drawn Cu-20%Nb Fiber Texture Formation and Mechanical Properties in Drawn Fine Copper Wire Isothermal Forging Textures in -TiAl Base Alloys Crystallographic Texture Changes of Oriented Ethylene-Vinylalcohol Copolymer Films on Rolling Examples of Neutron Diffraction Texture Analysis on One and the Same Chalcopyrite Sample before and after Experimental Deformation Microstructural Analysis of an Experimentally Deformed Chalcopyrite Grain by Orientation Imaging Microscopy Texture Development in Al 3003 during Hot Plane Strain Compression Ridging Phenomena in Textured Ferritic Stainless Steel Sheets Effect of Copper Alloying on the Development of Cold Rolling Textures in Extra Low Carbon Steels Texture Inhomogeneities in Rolled Profiles Texture and Yield Locus Evolution in 70/30 Brass under Different Deformation Paths Quantitative Texture Analysis of Naturally Deformed Polyphase Dolomite Marbles and its Kinematic Significance Examination of Texture Discontinuity at Sheet Surface due to Cold Rolling Strain and Temperature Dependence of Deformation Banding Hot Rolling Textures of Aluminium Textures in Two Phase Intermetallic TiAl Alloys after Compression and Extrusion Preferred Orientation of a Naturally and Experimentally Deformed Pyrrhotite Ore by X-Ray and Neutron Diffraction Texture Analysis Texture Development of Cold Drawn Wires in ( +ss) CuZnAl Shape Memory Alloys Temperature Effects on Rolling Texture Formation in Zirconium Alloys Textures of Cold Rolled and Annealed Tantalum Texture Evolution during the Drawing of an Interstitial-Free Low Carbon Steel Texture and Microstructure Development in a Cold-Rolled Duplex Stainless Steel Annealed at 800 DegreesC About Fair Defining the Texture of Sheet Zinc Influence of Grain Boundary Orientation on Deformation and Texture Development in Rolled {112} Cu-Bicrystals Formation of Biaxial-Stretching Textures in FCC Sheet Metals Influence of Initial Texture on the Development of Deep Drawing Textures in FCC Metals Formation of the Recrystallization Texture in Deformed Single Crystals Texture Evolution by Recrystallization and Grain Growth in Cold Rolled and Annealed (100)[001] Single Crystal of Fe-3%Si Texture Development during Secondary Recrystallization Rolling and Annealing Texture in Twin Roll Cast Commercial Purity Aluminium Deformation and Recrystallization Textures in Al-SiC Metal-Matrix Composites Preferred Grain Boundary Orientations Formed during Secondary Recrystallization of a Cu-0.5 at%-Mn Alloy Behaviour of Statistical Texture Parameters Applied to Single Grain Orientation Measurements in Recrystallized Al-Mn Formation of Recrystallization Textures and Plastic Anisotropy in Al-Mg-Si Alloys Investigation into the Nucleation Process of Recrystallization in Cold Rolled Boron Doped Ni3Al The Use of Operators in Investigating Secondary Recrystallization of 3% Silicon Steel Control of the BCC-Metals Texture by Pre-Recrystallization Annealing during Deformation Analysis of Misorientation Characteristics in Annealed and Deformed Copper Growth Selection Experiments on Tensile Deformed -Oriented Aluminium(99.998%) Single Crystals The Effect of Intermetallic Particles and Fibers on Recrystallization Textures of Cold Rolled Aluminum Alloys Effect of Substitutional Alloying Elements on the Development of Recrystallization Textures in Extra Low Carbon Steels Texture Development during Secondary Recrystallization of Grain Oriented Silicon Steel Texture Evolution during Recrystallisation of Ultra-Low Carbon Steel Texture Development of Amorphous FeBSi Alloy during Crystallization Recrystallization Texture in Fe-28Al-5Cr Alloy Sheet Pancake Grain Structure and Recrystallization Texture Formation in Ultra-Low Carbon Al-Killed Sheet Steels Cube Texture Generation Dependence on Deformation Textures in Cold Rolled OFE Copper Recrystallization Texture in Fe 3% Si Alloys Obtained by Direct Casting: Characterization by EBSD and X-Ray Diffraction Effects of Precipitations on the Annealing Textures of Ferritic Stainless Steels Texture Development of Strip Cast Ferritic Stainless Steel Deformation and Recrystallization Textures of Cu-Si Alloys Influence of Region Hot Rolling on the Rolling and Recrystallization Texture of Cold Rolled Ti-Bearing Extra Low Carbon Steel Sheets Grain Boundary Misorientation Changes during Grain Growth in Pure Aluminium Grain Structure Evolution during Grain Growth in 2-D Aluminum Foils In Situ Observations of the Initial Stage of Recrystallization of Highly Rolled Phosphorous Copper Recrystallization Textures of a Cross-Rolled Aluminum Alloy Dynamic Observation of the Growth of Secondary Recrystallized Grains of Fe-3% Si Alloy Utilizing Synchrotron X-Ray Topography On the Formation of Cube Texture in Aluminium The Effect of Hot-Rolling Parameters on Texture Development and Microstructure in Aluminium AA5182 Texture and Grain Boundary Character Distribution (GBCD) in B-Free Ductile Polycrystalline Ni3Al Evolution of the Microtexture during Recrystallization of High Purity Al-Mn Substructure Analysis in Textured Metallic Materials Individual Grain Orientation Relations after High-Speed Hot Rolling of Steel Rods Local Orientation Investigation on the Ridging Phenomenon in Fe 17% Cr Steel The Influence of Initial Microstructure on the Recrystallization Textures of Aluminium Alloys after Hot Deformation by Laboratory Simulation Influence of the Initial Texture on the Microstructure- and Microtexture Development during High Temperature Low Cycle Fatigue EBSP and SIMS Studies of Oxygen Tracer Diffusion in the High Temperature Superconductor La2-xSrxCuO4 Deformation Banding and Its Influence on High SFE FCC Rolling Texture Development Evidence for the Existence of a Special Class of Crystallographic Misorientations The Dependence of Dislocation Density and Cell Size on Crystallographic Orientation in Aluminum Microtexture Development during High Temperature Deformation of Nimonic 80A Single Crystals The Influence of the Extrusion Speed on Texture in the Surface Layer of Aluminium Profiles Investigated by the EBSP Technique Stress-Induced Grain Growth in Thin Al-1%Si Layers on Si/SiO2 Substrates Grain Subdivision during Deformation of Polycrystalline Aluminium Texture Estimate from Minimum Ranges of SAD Pole Figures Evaluation of the High Temperature ss Texture of a Sample of TA6V from Individual Orientation Measurements of Plates of the Phase at Room Temperature Influence of Shear Banding on the Texture in Rolled and Channel-Die Compressed Polycrystalline Copper Local Orientation Changes during Shear Banding of Copper Single Crystals Compressed in Channel-Die Local Microstructural Investigations in Recrystallized Quartzite Using Orientation Imaging Microscopy Effect of Texture on Strain Localization in Deformation Processing A Local Texture Analysis of a Hot Deformed Al-Li-Zr Alloy About the Texture Influence on the Frequency of CSL Boundaries in Steels Misorientation Distributions and the Transition to Continuous Recrystallisation in a Strip Cast Aluminium Alloy Direct Observation of Orientation Changes Following Channel Die Compression of Polycrystalline Aluminum: Comparison between Experiment and Model Microtexture Evolution of Necklace Structures during Hot Working Orientational Aspects of the Morphological Elements of the Microstructure in Highly Cold Rolled Pure Copper and Phosphorus Copper Microtexture Determination of As-Drawn Tungsten Wires by Backscatter Kikuchi Diffraction in the Scanning Electron Microscope Micro-Texture Analysis of Diffusion Bonded Interfaces in Al-Li Alloy Sheet Microtextural Characterization of Annealed and Deformed Copper Determination of Local Texture and Deformation Systems in TiAl6V4 and T40 Textures in Thin Films Texture Formation in Hexagonal Materials The Effects of Impurity Elements on the Preferred Orientation during Melt Spinning of Dilute Zn-Alloys Relations between Texture, Superplastic Deformation and Mechanical Properties of Thin TA6V Slabs Texture in Zircaloy-4: Effect of Thermomechanical Treatments Texture of Electroplated Coatings of Copper and Bismuth Telluride X-Ray Texture Analysis in Films by the Reflection Method: Principal Aspects and Applications Experimental Studies of Texture Development in Co-Cr Films Electric Field Induced Domain Formation in Surface Stabilized Ferroelectric Liquid Crystal Cells Epitaxy in Texture Formation of Electrodeposited Cu-Coatings Texture Formation in Al 2O3 Substrates Preferred Orientations in Polycrystalline C60 Inhomogeneous Textures in Tantalum Sheets Texture and Grain Structure Effects on the Reliability of Microelectronic Interconnects Textures in Aluminum and Copper Thin Films Controlled Texture Development in Hot-Forged Lithium Fluoride Texture Analysis in Zircaloy Cladding Tube Material for Nuclear Fuel Natural Fibre Textures in a Naturally Textured Material Macrotextures of Stainless Fe-Cr Steels Neutron Diffraction Measurements of Texture in Silicon Carbide Whisker-Reinforced Aluminum Composites Formation of Oblique Shape and Lattice Preferred Orientation in a Quartz Band of a Gneissic Mylonite Texture of Aluminium and Iron Thin Films and Texture of Bilayers Al/Fe Deposited on Silicon X-Ray Diffraction Study of Texture Evolution in Electrodeposited Zinc Layers The Effect of Precipitates on Texture Development The Influence of a Weak Preferred Orientation on the Strength of Aluminium Oxide Ceramic Influence of Segregation of Phosphorus on Texture Development in Cold-Rolled Fe-P Alloys during Annealing Anisotropic Properties of Minerals and Rocks The Influence of Microstructure and Texture on Fracture Toughness in Titanium Alloy Corona-5 Orientation Dependence of the Permeability in Textured Soft Magnetic Materials Anomalies of Young's Modulus in Fe-Cu Composites after High Degrees of Deformation Stress Birefringence in Textured Silver Chloride Limited Fibre Components in Texture Analysis: Texture Contribution in Anisotropy of Physical Properties Local Mechanical Properties in Thin Aluminium Layers on Silicon Substrates Calculated from Measured Grain Orientations Toughness Anisotropy in Brittle Materials Numerical Analysis of Stiffness in Sheet Products Based on Crystal Anisotropy The Dependence of the Anisotropy and Texture Properties of Injection Moulded Liquid Crystal Polymer Parts on Moulding Parameters Use of Irreducible Spherical Tensors in the Calculation of the Mean Elastic Properties of Polycrystals Derivation of Yield Criteria of Cubic Metals from Schmid's Law Calculation of Average Elastic Moduli of Polycrystalline Materials Including BaTiO3 and High-Tc Superconductors Textures and Plastic Strain Ratios of Planar Isotropic Sheet Metals Texture and Formability of Aluminum Sheets Strain Localization and Fracture in Anisotropic FCC Metal Sheets: Shear Bands On Some Methodical Developments Concerning Calculations Performed Directly in the Orientation Space On the Geometric Mean of Physical Tensors Using Orientation Distributions The Effects of Texture and Strain on the R-Value of Heavy Gauge Tantalum Plate Determination of Young's Modulus in Textured CuZnAl Shape Memory Alloys Effect of Texture and Microstructure on the Mechanical Properties of Zn Alloys Diamagnetic Anisotropy of Precambrian Quartzites (Moeda Formation, Taquaral Valley, Minas Gerais, Brazil) Magnetic Anisotropy and Texture of Banded Hematite Ores The Work Hardening of Pearlite during Wire Drawing Texture Gradient Effects in Tantalum Finite Element Modeling of Polycrystalline Solids Modelling the Effects of Static and Dynamic Recrystallization on Texture Development Theory of Grain Boundary Structure Effects on Mechanical Behaviour Simulation of Rolling and Deep Drawing Textures in Ferritic Steels: Application to Ear Profile Calculation in Deep Drawing An Equilibrium-Based Model for Anisotropic Deformations of Polycrystalline Materials Interconnection of Texture Development and Alternative Slipping of Different Types of Slip Systems: Computer Simulation A New Theory of the FCC Rolling Texture Transition Effect of Cube Nucleus Distribution on Cube Texture Texture Development and Simulation of Inhomogeneous Deformation of FeCr during Hot Rolling On the Effect of Grain Orientation on Deformation Texture Experimental and Theoretical Study of the Recrystallization Texture of a Low Carbon Steel Sheet Modelling Cyclic Deformation Textures with Orientation Flow Fields Failures to Model the Development of a Cube Texture during the High Temperature Compression of Al-Mg Alloys Calculation of the Recrystallization Textures of Cubic Metals Comparison of a Self-Consistent Approach and a Pure Kinematical Model for Plastic Deformation and Texture Development Lattice Rotations during Plastic Deformation with Grain Subdivision Texture of Microstructures in BCC Metals for Various Loading Paths Modelling of the Texture Formation in Electrodeposition Process Simulation of Recrystallization Texture in Copper Grain Growth Simulation by Monte Carlo Method in a HiB Fe 3% Si Alloy Effect of Deep Drawing on Texture Development in Extra Low Carbon Steel Sheets Contribution of EBSP to the Determination of the Rotation Flow Field A Modified Self Consistent Viscoplastic Model Based on Finite Element Results Prediction of Forming Limits of Titanium Sheets Using the Perturbation Analysis with Texture Development Taylor Simulation of Cyclic Textures at the Surface of Drawn Wires Using a Simple Flow Field Model Modeling Microstructural Evolution of Multiple Texture Components during Recrystallization On the Theory of Compromise Texture Anisotropic Finite-Element Prediction of Texture Evolution in Material Forming Finite-Element Prediction of Heterogeneous Material Flow during Tensile Testing of Anisotropic Material Practical Aspects of Texture Control in Low Carbon Steels Inspection and Control by On-Line Texture Measurement The Influence of Texture on the Magnetic Properties of CoCr Films Effect of Strain Path Change on Anisotropy of Yield Stresses of Cubic Structure Sheet Metals A Quantitative Analysis of Earing during Deep Drawing of Tin Plate Steel and Aluminum Earing Prediction From Experimental and Texture Data Earing in Single Crystal Sheet Metals The Influence of Texture and Microstructure on Corrosion-Fatigue in Ti-6Al-4V Texture Evolution during Deep Drawing in Aluminium Sheet Texture Inhomogeneities in High Tensile Strength Steels Processed with Low Temperature Controlled Rolling Annealing Textures in Aluminium Deformed by Hot Plane Strain Compression The Effect of Texture and Grain Boundary Structure on the Intergranular Corrosion of Stainless Steel Study on Factors Affecting R-Value of Cu Precipitation-Hardening Cold Rolled Steel Sheet Importance of Process Parameters for Texture and Properties of Microalloyed Deep Drawing Steels Earing and Textures in Austenitic Stainless Steel Type 305 Direct Oberservation of the Nucleation and Growth Rates of Cube and Non-Cube Grains in Warm Plane-Strain Extruded Commercial Purity Aluminum Global Texture Development in Cold Work of Copper and Brass by Pass Rolling Texture Development in Ferrous Materials during Deformation by Pass Rolling or Compression Quantitative Correlation of Texture and Earing in Al-Alloys Determination of Residual Stresses in Plastically Deformed Polycrystalline Material X-Ray Residual Macrostress of Texturized Polycrystals from Pole Figures A New Method for Crystal Structure Analysis of Textured Powder Samples Wire Geometry Correction of Textures and Stress Measurements on Wires

「Nielsen BookData」 より

詳細情報

• NII書誌ID(NCID): BA23129054
• ISBN:
  • 0878496815
  • 0878496815
• 出版国コード: sz
• タイトル言語コード: eng
• 本文言語コード: eng
• 出版地: Aedermannsdorf, Switzerland
• ページ数/冊数: 2 v. (2099 p.)
• 大きさ: 25 cm
• 親書誌ID:
  • BA00294222