ICOTOM-10 : proceedings of the 10th International Conference on Textures of Materials, Clausthal, Germany, 20-24 September 1993
Author(s)
Bibliographic Information
ICOTOM-10 : proceedings of the 10th International Conference on Textures of Materials, Clausthal, Germany, 20-24 September 1993
（Materials science forum, v. 157-162）
Trans Tech Publications, c1994
- pt. 1
- pt. 2
Available at / 6 libraries
-
No Libraries matched.
- Remove all filters.
Note
Includes bibliographical refernces and indexes
Description and Table of Contents
Description
This book reflects quite clearly the expansion of the field of "textures" as well as the rapid growth of the texture community. During the recent years, the scope of this field has been expanded to virtually all crystalline and even partly crystalline materials including intermetallic compounds, ceramics, polymers as well as multiphase composites and even fullerenes.
Table of Contents
A Historical Survey of Texture Development between ICOTOM-1 and ICOTOM-10
Statistical Crystallography of the Polycrystal
Orientation Imaging Microscopy: New Possibilities for Microstructural Investigations Using Automated BKD Analysis
Textures in Ceramic Materials
Texture Analysis by Neutron Diffraction
Advanced Experimental Techniques in X-Ray Texture Analysis
Quantitative Texture Analysis of Thin Polycrystalline Layers
An Experimental Apparatus for Quantitative On-Line Texture Analysis
Investigation of Inhomogeneous Textures of Coatings and Near-Surface-Layers
A New Method for Texture Measurement Based on an X-Ray Imaging Plate System
X-Ray Method for Continuous Tracking of Grain Boundary Motion: Investigation of Grain Boundary Migration in Al-Bicrystals
A High-Pressure Device for In-Situ Measurements in a Neutron Beam
Electronmicrodiffraction (EBSP) in the Scanning Electron Microscope (SEM): Further Hardware Development to Improve Pattern Quality
A High Resolution Electron Diffraction Method for On-Line Texture Analysis
Automatic Recognition of Deformed and Recrystallized Regions in Partly Recrystallized Samples Using Electron Back Scattering Patterns
Optimization of the Texture Determination of Thin Films from X-Ray Diffraction Measurements
Determination of Texture in CuZnAl Shape Memory Alloys in the High Temperature Austenitic Phase
Orientation Connectivity in Polycrystals
High Temperature Texture Goniometer for the Measurement of Transformation Textures
A CCD Camera System for the Acquisition of Backscatter Kikuchi Patterns on an SEM
An Inexpensive CCD Camera System for the Recording and On-Line Interpretation of TEM Kikuchi Patterns
On-Line Interpretation of SAD Channeling Patterns
Preparation of High-Resistance or Sensitive Samples for Grain Orientation Measurement with Electron Microscopes
Equipment for Texture Measurement in Thin Films
Application of the Method for Non-Destructive Evaluation of Texture Heterogeneity
Influence of Texture on Backscattered Ultrasonic Noise
Characterisation of Multilayers Crystallographic Texture
Determination of the Texture of a TiNi Shape Memory Alloy by Treatment of a Set of Overlapping Rays
On-Line Determination of Deformation Systems for Cubic and Hexagonal Materials with the TEM
On-line Interpretation of Spot and Kikuchi Patterns
Determination of Magnetic Textures in Ferromagnetics by Means of Neutron Diffraction
Statistics, Evaluation and Representation of Single Grain Orientation Measurements
Experimental Errors in Quantitative Texture Analysis from Diffraction Pole Figures
Coordinate Free Tensorial Representation of N-Point Correlation Functions for Microstructure by Harmonic Polynomials
Ultrasonic Characterization of the Texture of Aluminum Alloys
Some Comments about Texture Analysis: Comparison between Harmonic and Vector Methods
Texture of High Temperature Deformed - 2 Titanium Aluminides
Practical Considerations in the Calculation of Orientation Distribution Functions from Electron Back-Scattered Diffraction Patterns
Approximation of Orientation Distribution of Grains in Polycrystalline Samples by Means of Gaussians
Automatic Quantitative Analysis of Texture Components from CODF Data
ODF Analysis and Physical Properties on Personal Computer Basis
Series Expansion and Positivity
Variation Width, Modeling Assumptions and Interpretation of ODFs from Diffraction PDFs
Texture Analysis from Diffraction Pole Figures of Structurally Inhomogeneous Polycrystals
Some Applications of the Texture Component Model
Orientation Representation on the 4-D Unit Sphere, the Analogon of the 3-D Pole Sphere
Estimate the Grain Number for True ODF Determination by Individual Orientation Detecting Method
Absorption Correction for Non-Standard Geometry for Pole Figure Measurements
Approximation of the ODF by Gaussians for Sharp Textures
Numerical Economization of the Series Method
The ODF Calculation from Pole Figures for Different Types of Crystal and Sample Symmetries
Statistical Analysis of Single Grain Orientation Data Generated from Model Textures
Analysis of the ADC Method for Direct ODF Calculation by Use of Gauss Models and Standard Functions
Inverse Formulas for Orientation Distribution Function
Analogy and Duality of Quantitative Texture Analysis by Harmonic or Indicator Functions
Exploratory Orientation Data Analysis: Kernel Density Estimation and Clustering
Methods for Determining Small Differences between Measured Textures
Linear Regression for Texture Comparison
Smoothing Pole Figures Using Tensor Products of Trigonometric and Polynomial Splines
Direct Correspondence between the Volumic Fractions Found by Texture Analysis with the Vector Method and the Harmonic Method and Inverse Correspondence
Quantitative Texture Analysis with the Vector Method, Using Pole Figures of Rays and a Set of Overlapping Rays
Texture Analysis from Diffraction Spectra
Display of the ODF by an Image Analyzer
PC Program for the Calculation of ODF from SAD Pole Figures or from Individual Grain Orientations
A Computer Program for Determining Volume Fractions of Texture Components in Cubic Materials
Development of Microtextures in Cold Rolled Iron-Oligocrystals
Texture Analysis in the Monoclinic Martensitic Phase of a CuZnAl Shape Memory Alloy
Texture and Phase Development in Al-40at% Ni Composites
Oxidation of Titanium, Zirconium and their Alloys, Texture of their Oxide Scales
Texture Analysis of an Amphibolite Using the Component Method
Changes in Texture by Irradiation with Ar++ of Iridium and Platinum Layers on Oriented Sapphire Substrates
Cube Texture in Aluminum Single Crystal of a (118)[711] Orientation
Texture Competition in Solidification Process
Texture of Al-7%Si Ingots
Texture Transformation due to Martensitic Phase Transformation in CuZnAl Shape Memory Alloys
Effect of Phosphorous on the Development of Textures in Ti-Stabilized Steel Sheets
Describing the Rolling Texture in Very Low Stacking Fault Energy Alloys
Deformation Texture Formation from Single Crystals
Rolling and Annealing Textures of BCC Metals
Study of the Texture of Steelcord during the Wet Drawing Process - Influence of the Patenting and the Friction on the Dies
The Effects of the Cold Rolling Process on the Texture of Zircaloy-4 Sheets
Texture and Microstructure of Channel-Die Deformed Aluminum Bicrystals with S Orientations
Pb Texture of Pb-Al Composites Determined by the Iterative Series Expansion Method and the Component Method
Plane Strain Compression of Titanium Crystals
Development of Orientation and Damage during the Plastic Deformation of Semicrystalline Polyoxymethylene
Correlation between Texture and Dislocation Structure in Deformed Metals
On the Inhomogeneous Rolling Texture Transition
The Development of Deformation Textures as a Function of the Phase Fractions in Two-Phase Titanium-Based Alloys
Influence of the Rolling Temperature on the Texture Gradient in an Al-Mg-Si Alloy
Rolling Texture Development in Cu-Mn-Alloys
Texture Development in Extruded Al-Cu Composites
Textural and Microstructural Evolution during Cold-Rolling of Pure Nickel
Circular Texture in Thin Wires
Textures of Rolled and Wire Drawn Cu-20%Nb
Fiber Texture Formation and Mechanical Properties in Drawn Fine Copper Wire
Isothermal Forging Textures in -TiAl Base Alloys
Crystallographic Texture Changes of Oriented Ethylene-Vinylalcohol Copolymer Films on Rolling
Examples of Neutron Diffraction Texture Analysis on One and the Same Chalcopyrite Sample before and after Experimental Deformation
Microstructural Analysis of an Experimentally Deformed Chalcopyrite Grain by Orientation Imaging Microscopy
Texture Development in Al 3003 during Hot Plane Strain Compression
Ridging Phenomena in Textured Ferritic Stainless Steel Sheets
Effect of Copper Alloying on the Development of Cold Rolling Textures in Extra Low Carbon Steels
Texture Inhomogeneities in Rolled Profiles
Texture and Yield Locus Evolution in 70/30 Brass under Different Deformation Paths
Quantitative Texture Analysis of Naturally Deformed Polyphase Dolomite Marbles and its Kinematic Significance
Examination of Texture Discontinuity at Sheet Surface due to Cold Rolling
Strain and Temperature Dependence of Deformation Banding
Hot Rolling Textures of Aluminium
Textures in Two Phase Intermetallic TiAl Alloys after Compression and Extrusion
Preferred Orientation of a Naturally and Experimentally Deformed Pyrrhotite Ore by X-Ray and Neutron Diffraction Texture Analysis
Texture Development of Cold Drawn Wires in ( +ss) CuZnAl Shape Memory Alloys
Temperature Effects on Rolling Texture Formation in Zirconium Alloys
Textures of Cold Rolled and Annealed Tantalum
Texture Evolution during the Drawing of an Interstitial-Free Low Carbon Steel
Texture and Microstructure Development in a Cold-Rolled Duplex Stainless Steel Annealed at 800 DegreesC
About Fair Defining the Texture of Sheet Zinc
Influence of Grain Boundary Orientation on Deformation and Texture Development in Rolled {112} Cu-Bicrystals
Formation of Biaxial-Stretching Textures in FCC Sheet Metals
Influence of Initial Texture on the Development of Deep Drawing Textures in FCC Metals
Formation of the Recrystallization Texture in Deformed Single Crystals
Texture Evolution by Recrystallization and Grain Growth in Cold Rolled and Annealed (100)[001] Single Crystal of Fe-3%Si
Texture Development during Secondary Recrystallization
Rolling and Annealing Texture in Twin Roll Cast Commercial Purity Aluminium
Deformation and Recrystallization Textures in Al-SiC Metal-Matrix Composites
Preferred Grain Boundary Orientations Formed during Secondary Recrystallization of a Cu-0.5 at%-Mn Alloy
Behaviour of Statistical Texture Parameters Applied to Single Grain Orientation Measurements in Recrystallized Al-Mn
Formation of Recrystallization Textures and Plastic Anisotropy in Al-Mg-Si Alloys
Investigation into the Nucleation Process of Recrystallization in Cold Rolled Boron Doped Ni3Al
The Use of Operators in Investigating Secondary Recrystallization of 3% Silicon Steel
Control of the BCC-Metals Texture by Pre-Recrystallization Annealing during Deformation
Analysis of Misorientation Characteristics in Annealed and Deformed Copper
Growth Selection Experiments on Tensile Deformed -Oriented Aluminium(99.998%) Single Crystals
The Effect of Intermetallic Particles and Fibers on Recrystallization Textures of Cold Rolled Aluminum Alloys
Effect of Substitutional Alloying Elements on the Development of Recrystallization Textures in Extra Low Carbon Steels
Texture Development during Secondary Recrystallization of Grain Oriented Silicon Steel
Texture Evolution during Recrystallisation of Ultra-Low Carbon Steel
Texture Development of Amorphous FeBSi Alloy during Crystallization
Recrystallization Texture in Fe-28Al-5Cr Alloy Sheet
Pancake Grain Structure and Recrystallization Texture Formation in Ultra-Low Carbon Al-Killed Sheet Steels
Cube Texture Generation Dependence on Deformation Textures in Cold Rolled OFE Copper
Recrystallization Texture in Fe 3% Si Alloys Obtained by Direct Casting: Characterization by EBSD and X-Ray Diffraction
Effects of Precipitations on the Annealing Textures of Ferritic Stainless Steels
Texture Development of Strip Cast Ferritic Stainless Steel
Deformation and Recrystallization Textures of Cu-Si Alloys
Influence of Region Hot Rolling on the Rolling and Recrystallization Texture of Cold Rolled Ti-Bearing Extra Low Carbon Steel Sheets
Grain Boundary Misorientation Changes during Grain Growth in Pure Aluminium
Grain Structure Evolution during Grain Growth in 2-D Aluminum Foils
In Situ Observations of the Initial Stage of Recrystallization of Highly Rolled Phosphorous Copper
Recrystallization Textures of a Cross-Rolled Aluminum Alloy
Dynamic Observation of the Growth of Secondary Recrystallized Grains of Fe-3% Si Alloy Utilizing Synchrotron X-Ray Topography
On the Formation of Cube Texture in Aluminium
The Effect of Hot-Rolling Parameters on Texture Development and Microstructure in Aluminium AA5182
Texture and Grain Boundary Character Distribution (GBCD) in B-Free Ductile Polycrystalline Ni3Al
Evolution of the Microtexture during Recrystallization of High Purity Al-Mn
Substructure Analysis in Textured Metallic Materials
Individual Grain Orientation Relations after High-Speed Hot Rolling of Steel Rods
Local Orientation Investigation on the Ridging Phenomenon in Fe 17% Cr Steel
The Influence of Initial Microstructure on the Recrystallization Textures of Aluminium Alloys after Hot Deformation by Laboratory Simulation
Influence of the Initial Texture on the Microstructure- and Microtexture Development during High Temperature Low Cycle Fatigue
EBSP and SIMS Studies of Oxygen Tracer Diffusion in the High Temperature Superconductor La2-xSrxCuO4
Deformation Banding and Its Influence on High SFE FCC Rolling Texture Development
Evidence for the Existence of a Special Class of Crystallographic Misorientations
The Dependence of Dislocation Density and Cell Size on Crystallographic Orientation in Aluminum
Microtexture Development during High Temperature Deformation of Nimonic 80A Single Crystals
The Influence of the Extrusion Speed on Texture in the Surface Layer of Aluminium Profiles Investigated by the EBSP Technique
Stress-Induced Grain Growth in Thin Al-1%Si Layers on Si/SiO2 Substrates
Grain Subdivision during Deformation of Polycrystalline Aluminium
Texture Estimate from Minimum Ranges of SAD Pole Figures
Evaluation of the High Temperature ss Texture of a Sample of TA6V from Individual Orientation Measurements of Plates of the Phase at Room Temperature
Influence of Shear Banding on the Texture in Rolled and Channel-Die Compressed Polycrystalline Copper
Local Orientation Changes during Shear Banding of Copper Single Crystals Compressed in Channel-Die
Local Microstructural Investigations in Recrystallized Quartzite Using Orientation Imaging Microscopy
Effect of Texture on Strain Localization in Deformation Processing
A Local Texture Analysis of a Hot Deformed Al-Li-Zr Alloy
About the Texture Influence on the Frequency of CSL Boundaries in Steels
Misorientation Distributions and the Transition to Continuous Recrystallisation in a Strip Cast Aluminium Alloy
Direct Observation of Orientation Changes Following Channel Die Compression of Polycrystalline Aluminum: Comparison between Experiment and Model
Microtexture Evolution of Necklace Structures during Hot Working
Orientational Aspects of the Morphological Elements of the Microstructure in Highly Cold Rolled Pure Copper and Phosphorus Copper
Microtexture Determination of As-Drawn Tungsten Wires by Backscatter Kikuchi Diffraction in the Scanning Electron Microscope
Micro-Texture Analysis of Diffusion Bonded Interfaces in Al-Li Alloy Sheet
Microtextural Characterization of Annealed and Deformed Copper
Determination of Local Texture and Deformation Systems in TiAl6V4 and T40
Textures in Thin Films
Texture Formation in Hexagonal Materials
The Effects of Impurity Elements on the Preferred Orientation during Melt Spinning of Dilute Zn-Alloys
Relations between Texture, Superplastic Deformation and Mechanical Properties of Thin TA6V Slabs
Texture in Zircaloy-4: Effect of Thermomechanical Treatments
Texture of Electroplated Coatings of Copper and Bismuth Telluride
X-Ray Texture Analysis in Films by the Reflection Method: Principal Aspects and Applications
Experimental Studies of Texture Development in Co-Cr Films
Electric Field Induced Domain Formation in Surface Stabilized Ferroelectric Liquid Crystal Cells
Epitaxy in Texture Formation of Electrodeposited Cu-Coatings
Texture Formation in Al 2O3 Substrates
Preferred Orientations in Polycrystalline C60
Inhomogeneous Textures in Tantalum Sheets
Texture and Grain Structure Effects on the Reliability of Microelectronic Interconnects
Textures in Aluminum and Copper Thin Films
Controlled Texture Development in Hot-Forged Lithium Fluoride
Texture Analysis in Zircaloy Cladding Tube Material for Nuclear Fuel
Natural Fibre Textures in a Naturally Textured Material
Macrotextures of Stainless Fe-Cr Steels
Neutron Diffraction Measurements of Texture in Silicon Carbide Whisker-Reinforced Aluminum Composites
Formation of Oblique Shape and Lattice Preferred Orientation in a Quartz Band of a Gneissic Mylonite
Texture of Aluminium and Iron Thin Films and Texture of Bilayers Al/Fe Deposited on Silicon
X-Ray Diffraction Study of Texture Evolution in Electrodeposited Zinc Layers
The Effect of Precipitates on Texture Development
The Influence of a Weak Preferred Orientation on the Strength of Aluminium Oxide Ceramic
Influence of Segregation of Phosphorus on Texture Development in Cold-Rolled Fe-P Alloys during Annealing
Anisotropic Properties of Minerals and Rocks
The Influence of Microstructure and Texture on Fracture Toughness in Titanium Alloy Corona-5
Orientation Dependence of the Permeability in Textured Soft Magnetic Materials
Anomalies of Young's Modulus in Fe-Cu Composites after High Degrees of Deformation
Stress Birefringence in Textured Silver Chloride
Limited Fibre Components in Texture Analysis: Texture Contribution in Anisotropy of Physical Properties
Local Mechanical Properties in Thin Aluminium Layers on Silicon Substrates Calculated from Measured Grain Orientations
Toughness Anisotropy in Brittle Materials
Numerical Analysis of Stiffness in Sheet Products Based on Crystal Anisotropy
The Dependence of the Anisotropy and Texture Properties of Injection Moulded Liquid Crystal Polymer Parts on Moulding Parameters
Use of Irreducible Spherical Tensors in the Calculation of the Mean Elastic Properties of Polycrystals
Derivation of Yield Criteria of Cubic Metals from Schmid's Law
Calculation of Average Elastic Moduli of Polycrystalline Materials Including BaTiO3 and High-Tc Superconductors
Textures and Plastic Strain Ratios of Planar Isotropic Sheet Metals
Texture and Formability of Aluminum Sheets
Strain Localization and Fracture in Anisotropic FCC Metal Sheets: Shear Bands
On Some Methodical Developments Concerning Calculations Performed Directly in the Orientation Space
On the Geometric Mean of Physical Tensors Using Orientation Distributions
The Effects of Texture and Strain on the R-Value of Heavy Gauge Tantalum Plate
Determination of Young's Modulus in Textured CuZnAl Shape Memory Alloys
Effect of Texture and Microstructure on the Mechanical Properties of Zn Alloys
Diamagnetic Anisotropy of Precambrian Quartzites (Moeda Formation, Taquaral Valley, Minas Gerais, Brazil)
Magnetic Anisotropy and Texture of Banded Hematite Ores
The Work Hardening of Pearlite during Wire Drawing
Texture Gradient Effects in Tantalum
Finite Element Modeling of Polycrystalline Solids
Modelling the Effects of Static and Dynamic Recrystallization on Texture Development
Theory of Grain Boundary Structure Effects on Mechanical Behaviour
Simulation of Rolling and Deep Drawing Textures in Ferritic Steels: Application to Ear Profile Calculation in Deep Drawing
An Equilibrium-Based Model for Anisotropic Deformations of Polycrystalline Materials
Interconnection of Texture Development and Alternative Slipping of Different Types of Slip Systems: Computer Simulation
A New Theory of the FCC Rolling Texture Transition
Effect of Cube Nucleus Distribution on Cube Texture
Texture Development and Simulation of Inhomogeneous Deformation of FeCr during Hot Rolling
On the Effect of Grain Orientation on Deformation Texture
Experimental and Theoretical Study of the Recrystallization Texture of a Low Carbon Steel Sheet
Modelling Cyclic Deformation Textures with Orientation Flow Fields
Failures to Model the Development of a Cube Texture during the High Temperature Compression of Al-Mg Alloys
Calculation of the Recrystallization Textures of Cubic Metals
Comparison of a Self-Consistent Approach and a Pure Kinematical Model for Plastic Deformation and Texture Development
Lattice Rotations during Plastic Deformation with Grain Subdivision
Texture of Microstructures in BCC Metals for Various Loading Paths
Modelling of the Texture Formation in Electrodeposition Process
Simulation of Recrystallization Texture in Copper
Grain Growth Simulation by Monte Carlo Method in a HiB Fe 3% Si Alloy
Effect of Deep Drawing on Texture Development in Extra Low Carbon Steel Sheets
Contribution of EBSP to the Determination of the Rotation Flow Field
A Modified Self Consistent Viscoplastic Model Based on Finite Element Results
Prediction of Forming Limits of Titanium Sheets Using the Perturbation Analysis with Texture Development
Taylor Simulation of Cyclic Textures at the Surface of Drawn Wires Using a Simple Flow Field Model
Modeling Microstructural Evolution of Multiple Texture Components during Recrystallization
On the Theory of Compromise Texture
Anisotropic Finite-Element Prediction of Texture Evolution in Material Forming
Finite-Element Prediction of Heterogeneous Material Flow during Tensile Testing of Anisotropic Material
Practical Aspects of Texture Control in Low Carbon Steels
Inspection and Control by On-Line Texture Measurement
The Influence of Texture on the Magnetic Properties of CoCr Films
Effect of Strain Path Change on Anisotropy of Yield Stresses of Cubic Structure Sheet Metals
A Quantitative Analysis of Earing during Deep Drawing of Tin Plate Steel and Aluminum
Earing Prediction From Experimental and Texture Data
Earing in Single Crystal Sheet Metals
The Influence of Texture and Microstructure on Corrosion-Fatigue in Ti-6Al-4V
Texture Evolution during Deep Drawing in Aluminium Sheet
Texture Inhomogeneities in High Tensile Strength Steels Processed with Low Temperature Controlled Rolling
Annealing Textures in Aluminium Deformed by Hot Plane Strain Compression
The Effect of Texture and Grain Boundary Structure on the Intergranular Corrosion of Stainless Steel
Study on Factors Affecting R-Value of Cu Precipitation-Hardening Cold Rolled Steel Sheet
Importance of Process Parameters for Texture and Properties of Microalloyed Deep Drawing Steels
Earing and Textures in Austenitic Stainless Steel Type 305
Direct Oberservation of the Nucleation and Growth Rates of Cube and Non-Cube Grains in Warm Plane-Strain Extruded Commercial Purity Aluminum
Global Texture Development in Cold Work of Copper and Brass by Pass Rolling
Texture Development in Ferrous Materials during Deformation by Pass Rolling or Compression
Quantitative Correlation of Texture and Earing in Al-Alloys
Determination of Residual Stresses in Plastically Deformed Polycrystalline Material
X-Ray Residual Macrostress of Texturized Polycrystals from Pole Figures
A New Method for Crystal Structure Analysis of Textured Powder Samples
Wire Geometry Correction of Textures and Stress Measurements on Wires
by "Nielsen BookData"
