Proceedings of the Second ASM Heat Treatment and Surface Engineering Conference, in Europe, held, June 1st - 3rd, 1993, in Dortmund, Germany
著者
書誌事項
Proceedings of the Second ASM Heat Treatment and Surface Engineering Conference, in Europe, held, June 1st - 3rd, 1993, in Dortmund, Germany
（Materials science forum, v. 163-165）
Trans Tech Publications, c1994
- pt. 1
- pt. 2
大学図書館所蔵 件 / 全3件
-
該当する所蔵館はありません
- すべての絞り込み条件を解除する
注記
Includes index
内容説明・目次
内容説明
These Proceedings provide a picture of the current knowledge and technology of heat treatment and surface engineering. Most recent developments concerning the thermodynamics and kinetics of the underlying processes are presented here. Special emphasis is placed on process control and computer modelling.
目次
Thermodynamics and Heat Treatment
State-of-the-Art Developments in the Heat Treatment of Ferrous Alloys
Mechanisms and Modelling of Mass Transfer during Gas- Solid Thermochemical Surface Treatment. New Process and New Process Control for Carburizing and Nitriding
Heat Treatment in Hot Strip Rolling of Steel
Redistribution of Carbon during the Austenite to Ferrit Transformation in Pure Fe-C Alloys
The Influence of Thermal Path on the Beginning of Austenite and Residual Austenite Transformation
Metallurgical Aspects of Microstructures in Advanced Non-Heat-Treated Type High Strength Low-C Steels
The Electron Microscope Analysis Used to Study the Martensite Morphology in High Strenght Low Alloy Steels
The Activity of Carbon in the Two-Phase Fields of the Fe-Cr-C, Fe-Mn-C and Fe-Si-C Alloys at 1173 K
Thermal Treatment of Deformable White Irons Having Plasticity Induced by Carbide Transformation (PICT-Irons)
Boron Hardenability Effect in Case-Hardening ZF-Steels
Effect of Tempering Level on Mechanical Properties and Toughness of Spring Steels
The Relationship between Processing, Microstructure and Properties in TLP-50-AZ Steel for Off-Shore Platforms
Steel Heat Treatment with Fresnel Lenses
The Effects of Quenchant Media Selection and Control on the Distortion of Engineered Steel Parts
Applications of "Standard" Quenchant Cooling Curve Analysis
Thermomechanical Surface Treatment of Titanium Alloys
Thermomechanical Treatment of AA6061
Influence of Preliminary Heat Treatments on Microstructure, Mechanical Properties and Creep Behaviour of a 50Cr-50Ni Niobium Containing Alloy
Interdiffusion in High Temperature Two Phase, Ni-Cr-Al Coating Alloys
Over-Carburizing Kinetics and Microstructure of Z38CDV5.3 Tool Steel
Carburization of High-Chromium Steels
High Temperature (1050 DegreesC) Carburizing of SAE 1020 Steel and Its Effect on Fatigue Failure
The Influence of Carburizing and Heat Treatment on the Mechanical Properties of LH15 Grade Bearing Steel
Pulse Plasma Carburizing of Steel with High Pressure Gas Quenching
Ion Carburizing-Applications in Industry
Use of Thermogravimetry for the Study of Carbonitriding Treatment of Plain Carbon Steel and Low Alloy Steel
The Influence of Carbonitriding and Heat Treatment on the Properties of Low- and High-Carbon Steels
Establishment of Quasi Equilibrium States in Technical Systems of Iron and Nitriding Gas
Structure of Porous Areas of Nitride-Containing Compound Layers
Growth of Nitride Cover Layers on Compound Layers of Iron
The Effect of Surface Finishing on Mechanical and Microstructural Properties of Some Nitrided Steels
The Kinetics of Internal Nitriding of an Fe-7at.% Al Alloy
The Kinetics of Nitriding Layer Growth on Fe-Cr and Fe-Ti Alloys
Some More Data for the Eutectoid Equilibrium of the Fe-N-C System
The Sulphonitrocarburising Process Sulf Ionic (R)
Present State of Salt Bath Nitrocarburizing for Treating Automotive Components
The Diffusion Boronizing Process of Reactive Atmospheres Containing Boron Fluorides
Gas Boriding Conditions for the Iron Borides Layers Formation
Erosion-Corrosion Resistance of Boronised Steels
An Effective Method to Obtain Reasonably Hard Surface on the Steel X210Cr12(D3): Boriding
Successful Boronizing of Nickel-Based Alloys
Surface Hardening of Steels and Cast Irons by a DC Plasma Torch
On the Effect of an Additional Rolling on the Fatigue Behaviour of Surface Induction Hardened Components
Quality Control of Induction on Hardened Cast Iron Cylinder Head Valve Seats
Industrial Applications of Surface Treatments with High Power Lasers
Mechanical Properties and Microstructure of Laser Treated Al Alloys
Surface Alloying of Ti6Al4V Alloy by Pulsed Laser
Effect of Process Parameters on the Microstructure, Geometry and Microhardness of Laser-Clad Coating Materials
Laser Cladding in Pre-Made Grooves
Surface Treatments Using Ion Beams
The Effect of Composition, Heat Treatment and Surface Modification by Ion Implantation on the Oxidation Behaviour of Alloys from Fe-Cr-Al System
Modelling of Shot Peening Residual Stresses - Practical Applications
Shot Peening Induced Phase Transformations and Residual Stresses Measurements on Austempered Cast Irons by XRD
Mechanical Treatments on Die-Surfaced Obtained through Electro-Discharge Machining: Role of Shot-Peening and Sandblasting
Protective CVD Coatings - Going from High Temperature Processes to Plasma Activation
Plasma Processing for Enhanced Wear and Corrosion Performance
Structural Characteristics of PVD Ti-Based Coatings in Relation to their Wear and Corrosion Behaviour
The Architecture and Performance of Compositionally Gradient and Multi-Layer PVD Coatings
Thermal Shock Resistance of TiN Coated Material
Wear and Lifetime of PVD TiN Coated Tools
Wear and Tool Life of Taps with Hard Coats in Gray Cast Iron Machining
Mechanical and Electrical Properties of Co-Deposited and Multilayer Copper-Tungsten Films
Thermal Spraying
High-Velocity Oxy-Fuel Spraying
Ceramic, Hard Metallic and Metallic Coatings Produced by High Speed Flame Spraying
Plasma Spraying - an Economical Process for Improving Wear - and Corrosion Properties of Machinery Parts
Laser Remelting of HVOF Coatings
Porous Coating Parameters and Boiling Heat Transfer Enhancement
Chromizing
The Influence of Silicon on the Structure and Properties of Diffusion Aluminide Coatings on Nickel Base Superalloys
VC & NbC Coating on DIN 115CrV3 Steel in Molten Borax Bath
Effect of Heat Treatment on Microstructure of Cr-Ni-Fe Coatings Prepared by Electrodeposition
Prediction of Distortion and Residual Stresses of Engineering Steels Due to Heat Treatment
Computerized Property Prediction and Process Planning in Heat Treatment of Steels
Comparative Analysis of Kinetic Models Used for Description of Non-Isothermal Austenite Transformation
Computer Prediction of Austenite Transformation under Non-Isothermal Conditions
Calculation of the Hardness Distribution in Cooled Steel Products
Calculated Hardenability - the Way Towards Improved Consistency of Engineering Steels and Component Properties
Computer Simulation and Control of Carburization- and Nitriding Processes
Application of a Mathematical Model of Iron-Nitride Layer Growth during Gas Phase Nitriding
Finite Element Simulation of the Development of Residual Stresses during Nitriding under Consideration of the Micromechanical and Metallurgical Processes
Modelling of Nitrocarburizing
Computer Simulation of Carburization in Multiphase Systems
Modelling of Diffusion Mass Transfer and Phase Transformations in a Ternary Alloy with Dispersed Particles
Minimizing of Energy Consumption in Heat Treatment Processes
Thermodynamic Balance of Metallurgical Furnace
Mastering Heat Transfer in Continuous Furnaces by Computer Modelling
Numerical Determination of Heat Flow in Plasma-ARC Surface Hardening
Progress in Automation and Control of Atmosphere - and Plasmacarburising Batch Chamber Furnaces
Development of Gas-Fired Vacuum Furnaces
A User's View of Fluidised Bed Heat Treatment
「Nielsen BookData」 より
