Electrochemical methods in corrosion research V : proceedings of the 5th International Symposium, held in Sesimbra, Portugal, September 5-8, 1994
著者
書誌事項
Electrochemical methods in corrosion research V : proceedings of the 5th International Symposium, held in Sesimbra, Portugal, September 5-8, 1994
（Materials science forum, v. 192-194）
Trans Tech Publications, c1995
- : set
- pt. 1
- pt. 2
大学図書館所蔵 件 / 全2件
-
該当する所蔵館はありません
- すべての絞り込み条件を解除する
注記
Includes bibliographical references and indexes
内容説明・目次
内容説明
In recent years the particular significance of Materials Science and Technology has been generally accepted in the industrial countries. The use of materials in different applications is limited due to their natural tendency to react with their environment, i.e. corrosion. Since corrosion is typically an electrochemical phenomenon, different electrochemical methods form the scientific basis of corrosion research.
目次
Electrochemical, Microscopic and Surface Analytical Investigations of Chemical Breakdown of Passivity
Electrochemical Methods in Stress Corrosion Cracking
Microelectrochemical Investigations of MnS Inclusions
Examples of Electrochemical Testing of Stainless Steels in Industrial Environments
The Passivation of Al-W Alloys Produced by Ion Implantation
Factors Affecting the Reliability of Hydrogen Permeation Measurement
About the Influence of the Electronic Properties of Passive Layers on the Corrosion Rate
Anodic Films on Stainless Steel AISI 304 in Carbonate Aqueous Solution AT pH 8
Pitting Dissolution Current Induced by Non-Equilibrium Fluctuations
Electrochemical Incorporation of Molybdenum in the Passive Layer of a 17% Cr Ferritic Stainless Steel1
Modelling the Initiation of Crevice Corrosion of Passive Alloys at Elevated Temperatures
Pit-Initiation Studies on Polycrystalline, (100), (110) and (111) Oriented Aluminium Surfaces
Localised Corrosion of Advanced Stainless Steels
Influence of Molybdenum on the Corrosion Properties of Sputter-Deposited Stainless Steel Films
A Characterisation of Titanium Passivation Films by In-Situ AC Impedance Measurements and XPS Analysis
Test Method for Measurement of Pit Propagation Rates
Application of Transient Electrochemical Techniques to Characterize Thin Passive Films on Tin in Carbonate-Bicarbonate Solution
A Study on the Initial Stages of Oxidation of Copper In Alkaline Solution by Electrochemical and XPS Analysis
Surface Film Electric Resistance and Semiconductive Properties of Iridium/Iridium Oxide
Effect of pH on Electrochemical Behaviour and Passive Film Composition of Stainless Steels
Chemical Dissolution and Electrochemical Dissolution Mechanism for the Initiation of Localised Corrosion
Possibilities for Life Time Prediction of Organic Coatings with Electrochemical Impedance Measurements
EIS Study of Organic Coating Performance
On the Use of 'In Situ' UV-Visible and Infrared Spectroscopic Techniques for Studying Corrosion Products and Corrosion Inhibitors
Protective Properties of Multilayer Organic Coatings on Al Alloys
Organic Coated Steel Submitted to Cathodic Protection Studied by Electrochemical Methods
Application of Electrochemical Impedance Spectroscopy to Study the Atmospheric Corrosion of Painted Metals
Electrochemical Impedance Spectroscopy Characterization of the Protection by Anodized Layers on Aluminium Alloys
Electrochemical Measurements during the Formation of Thin Film Conversion Coatings
Corrosion Monitoring of ZRP on Steel by EIS to Evaluate the Performance of Different Coating Formulations
The Inhibiting Action of Indole and Some of its Derivates on Corrosion of Mild Steel in 1N Sulphuric Acid
Formation of Porous Anodic Oxide Films Containing Chromium Ions on Aluminium
Corrosion Inhibitor Characteristics of Benzotriazole and Potassium Ethyl Xanthate for Copper in Chloride Solutions
Chemical and Electrochemical Interactions on Corroding Metal Surfaces
Study of the Rusted Steel/Electrolyte System by Electrochemical Techniques
Pitting Corrosion of Laser Surface Modified Aluminium Alloys
The Interrelationship between Marine Biofouling, Cathodic Protection and Microbiologically Influenced Corrosion
Cyclic Laboratory Test Methods to More Closely Simulate Corrosion Performance of Zincalume (R) Coated Steel under Atmospheric Exposure Conditions
A Comparative Study on the Influence of Biogenic and Inorganic Sulfides on the Pitting Corrosion Resistance of Different Stainless Steels in 0.5 M NaCl Neutral Aqueous Solutions
Zero Resistance Ammetry - Its Application in Preventing the Corrosion of Stainless Steel in Cooling Waters
Dissolution of Copper in 1M Hydrochloric Acid at High Anodic Overvoltage
A Proposed Mechanism on Ni2+ Dissolution during Growth of Passive Films on Nickel in a Neutral Solution
Corrosion Phenomena and Shelf Life Prediction of Steel Beverage Cans with the Polarization Resistance Technique
The Breakdown of the Passivity of Copper in Neutral Sulphate Solutions: Voltammetric and Potentiostatic Studies
Copper Electrofaceting: Corrosion of Copper in Phosphoric Acid Aqueous Solutions
Effect of Manganese on the Initial Oxidation of Type 430 Stainless Steels at 1237 K
Behaviour of Corrosion Product Layers during Atmospheric Exposure
Temperature Effects on the Passive Film of a Fe-Cr-Ni Alloy
Applications of Impedance Spectroscopy to Corrosion Research
Investigation of Chromate Layer Formation by Impedance Techniques
Investigation of Corrosion Films on Zirconium Based Alloys by Electrochemical and Microscopic Methods
An Electrochemical Impedance Study of the Corrosion Inhibition of a 2024 Aluminum Alloy in Neutral Chloride Solutions
A Comparative EIS Study of Passive Layers Formed on Iron and Iron-Chromium Alloys
AC Impedance on Marine Sacrificial Anodes
Photoelectrochemistry in Corrosion Studies: Achievements and Perspectives
The Use of Pitting Transients to Test Microscopic Models of Localized Corrosion
Electrochemical Noise Measurements - A Theoretical Basis
Evaluation of Localized Corrosion Phenomena with Electrochemical Impedance Spectroscopy (EIS) and Electrochemical Noise Analysis (ENA)
In-Situ Imaging of Corrosion Processes
Investigation of Anodic Passive Layers on Tin-Indium Alloys by Photocurrent and Electrochemical Impedance Spectroscopies
Electrochemical Measurements of Prerusted Steels Pretreated in H3PO4 Solutions
Scanning Laser Enhanced Electrochemical Microscopy for Corrosion Research
Time Resolved RRDE Applied to Pitting of Fe-Cr Alloy and 304 Stainless Steel
An EQCM Study on Corrosion of Iron Thin Film in Deaerated Neutral Solutions
Applications of Scanning Tunneling Microscopy to Corrosion Research
Contributions of Raman Spectroscopy and Electrochemical Impedance to the Understanding of the Underpaint Corrosion Process of Zinc-Coated Steel Sheets
Effect of Residual Stress on the Corrosion Properties of CO2 Laser Surface Melted Alloys
Electrochemical Behaviour and Corrosion Resistance of Sputtered W-Ti-N Coatings on Steel Substrates
Advanced Electrochemical Techniques for Studying Repassivation Kinetics
Performance of Polymeric Particulate Composites as Corrosion Protective Coatings of Steel Surfaces
Investigations on the Corrosion Behaviour of Ni-Co Based Metallic Glasses by Electrochemical Techniques
Electrochemical Studies on Steel in Concrete
Advances in Electrochemical Impedance Measurements in Reinforced Concrete
Corrosion Rate on Reinforced Concrete Structures Determined by Electrochemical Methods
Carbonation of Flyash-Containing Concrete: Electrochemical Studies
Influence of Rebar Surface Condition on Polarisation Resistance Measurement in Concrete Structures
Influence of Multiple Rebar Mats on Electrochemical Removal of Chloride from Concrete
Passivation of Reinforcing Steel in Concrete
Galvanic Corrosion of Steel in Concrete
The Influence of the Ratio [Cl-]/[OH-] on the Corrosion Rate of Reinforcing Steel in Neutral and Acid Solutions
「Nielsen BookData」 より