Nondestructive characterization of materials VII : proceedings of the seventh International Symposium on Nondestructive Characterization of Materials held in Prague, Czech Republic, June 1995
Author(s)
Bibliographic Information
Nondestructive characterization of materials VII : proceedings of the seventh International Symposium on Nondestructive Characterization of Materials held in Prague, Czech Republic, June 1995
（Materials science forum, v. 210-213）
Transtec Publications, c1996
- : set
- pt. 1
- pt. 2
Available at 2 libraries
Note
Includes index
Description and Table of Contents
Description
The role of non-destructive evaluation is changing dramatically, and it has already expanded beyond its historical mission of detecting macroscopic defects in structures and in finished components which had usually spent a considerable time in service.
Table of Contents
Early Detection of Hydrogen-Induced Stress Corrosion Cracking Using Micromagnetic Test Methods
The Development of Nondestructive Evaluation (NDE) for Monitoring the Embrittlement in Nuclear Reactor Pressure Vessels
Evaluation of Digitized Signals from a Steel Cable Flaw Detector
Ferromagnetic Surface Layers Testing with Depth Resolution Using a Priori Knowledge
Barkhausen Noise Energy Measurement Method for Characterizing the Ferromagnetic Ratio of Alloys
Peculiarities of Connection between Mechanical Properties and Residual Magnetization of Articles of Different Sizes
Nondestructive Measurement of Grain Size in Steel Plates by Using Magnetic Coercive Force
Detecting the Tendency to Chilling in Series-Manufactured Cast-Iron Components Using Micromagnetic Test Procedures
Nondestructive Determination of the Transition from the Elastic into Microplastic State
Overview of Microwave NDE Applied to Thick Composites
Characterization of Green Ceramics by Microwaves and Ultrasound
Non-Destructive Moisture Measurement Using Microwaves
Models for Microwave Nondestructive Testing of Materials
Acoustics of Wood
Stress Wave Nondestructive Evaluation of Logs to Predict Structural Product Quality
Durability Assessment of Polymer Matrix Composite Materials
Damage Monitoring during Monotonic Tensile Loading of Quasi-Isotropic Carbon Epoxy Laminates
Measurement of Dislocation Density by Residual Electrical Resistivity
Anisotropy of Young Modulus and Technological Properties
Residual Stress Depth Profiles of Ausrolled 9310 Gear Steel
Neutron Diffraction Residual Stress Measurement at NIST
Localized Stress Measurement of Aluminum Alloy with Acoustic Microscope
Acoustoelastic Determination of Stresses in Steel Using Rayleigh Ultrasonic Waves
The Eddy Current Technique for Determining Residual Stresses in Steels
Recent Developments in Non-Destructive Characterization of Aerosols by Synchrotron Radiation
Nondestructive Measurement of Grain Size in Steel Plate by X-Ray Diffraction
X-Ray Diffraction Characterization of Thin Superconductive Films
X-Ray Backscatter Tomography: NDT Potential and Limitations
An X-Ray Sensitive CCD Camera System and Its Application to the X-Ray Diffractometric Investigation on Area Selective Semiconductor Epitaxy
Determination of the Elastic Behaviour of Carbon-Reinforced Carbon Materials Using Laser-Ultrasound and Theoretical Modeling
Elastic Moduli Measurements of SiC Reinforced Alumina at High Temperatures Using Laser-Ultrasonics
Absorption Measurements on Creep Damaged Samples Using the Reverberation Technique
Noncontact Alternatives to Laser Detection of Ultrasonic Signals
Nickel-Base Superalloys Characterized by SLAM after Long Term Heating
Microhardness and Raman Spectroscopy for Characterization of Fullerite Single Crystals
Very Near Field Optics: A Frontier Technology
Characterization of Thermal Degradation of Stainless Steel with Ultrasonic Velocities and Backscattering Noise
Nondestructive Inspection of Turbine Blades with Lock-In Thermography
Parameters Estimation in Photothermal Measurements with Photodeflectional Detection
Thermoacoustic Vibrometry for In-Situ Monitoring of Processes
Thermal-Wave Imaging: A Non-Destructive Technique to Characterize the Electromigration on Al Alloy
Residual Stress Distributions in the Rim of a Steam Turbine Disk Using the LCR Ultrasonic Technique
Nondestructive Evaluation of Nonconductive Cylindrical Nozzle in Pulsewise Excited Quasi-Stationary Electric Field
Non-Destructive Thickness Determination of Metallic Coatings Using Ultrasonic Rayleigh Waves
Nondestructive Evaluation of Material Parameters Using Neural Networks
How Calcareous Layers Affect Ultrasonic Thickness Gaging
Review of Inspection Qualification Programme and RRT Results
Characterization of Metal Surface by Means of Two-Dimensional Fractal Analysis
Comparison of Dynamic Photoelastic Visualization of Ultrasound with Parallel Computations
Ultrasonic Characterization of Repair Paste Bonds with Metals
Structural Characteristics of Powder Developers: Methods of Measurements
Main Physical Characteristics of Liquid Phase Developers
The Estimation of Elastic Modulus of Metallic Materials by Dynamic Indentation Method
Ultrasonic Characterization of Burrs in Aluminum Pressure Castings
Ultrasonic Characterization of Texture in Aluminum Rolled Products
Application of Magnetic Barkhausen Effect for Evaluation of Stresses and Structure of Ferromagnets
Delayed Cracking in Automotive Windshields
Double-Pumped Conjugators and Photo-Induced EMF Sensors: Two Novel, High-Bandwidth, Auto-Compensating, Laser-Based Ultrasound Detectors
Lock-In Vibrothermography Applied for Nondestructive Evaluation of Polymer Materials
Photothermal Investigation of Silicon Wafers with Diamond-Like Coating
High Resolution Photothermal Imaging of Metal Matrix Composite Interface
Nondestructive Testing of Coatings
Evolved Heat as a Fatigue Characterization Parameter
Comparison of Absolute Sensitivity Limits of Various Ultrasonic and Vibration Transducers
Behaviour of Concrete Observed by Acoustic Emission Measurement
Crack Closure during Cyclic Fatigue in MG-PSZ Ceramic as Detected by Acoustic Emissions
Elastic and Anelastic Behaviour of Zirconium Polycrystals
Stress Relaxation of Short Fiber Reinforced Mg Metal Matrix Composites after Thermal Cycling
Detection of Internal Stresses in Metal Matrix Composites by Stress Relaxation Measurements
Amplitude-Dependent Damping and Acoustoplastic Effect in Crystals
Evaluation of Dilatancy in Rock for Forecasting of Burst Prone Zones in Mines
Kinetic Approach to the Nondestructive Monitoring of Rock Failure
Energy - Frequency Distribution of Acoustic Emission from Loaded Rock Samples
Acoustic Emission in Amorphous Metals
Acoustic Emission as a Tool for Monitoring Electrical, Electromagnetic and Thermal Effects during the Brittle Cracking
Acoustic Emission Analysis of Grain Boundary Effect on Plastic Deformation of Bicrystals
Recent Developments in Real-Time Acousto-Ultrasonic NDE Technique to Detect & Monitor Various Damage Modes under Compressive Load
Tip Location Determination of Exposed and Filled Cracks Using Microwaves
Computer Simulation of Acoustic Waves Propagation in Elastically Anisotropic Materials
A Study of Lamb Wave Interaction with Defects in Sheet Materials Using a Differential Fibre-Optic Beam Deflection Technique
Observation of Internal Defect in Functionallly Gradient PSZ-Ni by Ultrasonic Imaging
Preliminary Evaluation of the Potential and Limitations of Microwave NDI Methods for Inspecting Graphite Composites
Damping in Magnesium Matrix Composites
Internal Friction Characterization of Metal Matrix Composites
Electrical Resistometry of Mg-Based Microcrystalline Alloys and Mg-Based Composites
A Study of the Crystal Growth Rate of Potassium Sulphate for Cooling Crystallization in an Ultrasonic Field
Determination and Monitoring of Through Hole Diameters Using Acoustic Diffraction
Microwave Dielectric Characterization of Low Density Glass Fibers with Resin Binder
Nondestructive Quality and Process Control in Injection Moulding Polymer Manufacture with Microwaves
Acousto-Ultrasonic Damage Evaluation of Steel-Belted Radial Tires
Materials Characterization of Powder Metallurgy Products Using Acousto-Ultrasonics
Process Integrated Nondestructive Testing of Laser-Hardened Components
Nondestructive Characterization of Cure Enhancement by High Power Ultrasound of Carbon Epoxy Composites
Diffraction Techniques in Engineering Applications
Materials Characterization with Cold Neutrons
Nondestructive Morphological Characterization of Latent and Etched Ion Tracks in PETP by SANS
Characterization of Microstructure of Plastically Deformed and Thermally Treated Carbon Steel by Means of Positron Annihilation Life-Time Spectroscopy in Comparison with Micromagnetic Methods
Positron Annihilation Measurements in Zirconium at High Temperatures
Dislocation Density Measurement and Positron Annihilation
Nondestructive Materials Characterization for Historic Conservation
Nondestructive Measurement of Grain Size in Steel Plate by Ultrasonic Attenuation
The Evaluation of Integrity of Ceramic-Metal Joints and Ceramic Coatings by C-Mode Acoustic Microscopy
Ultrasonic Characterization of Degradation in Lead Magnesium Niobate (PMN) Smart Materials
Measurement of Adhesion Strength Using Nonlinear Acoustics
Next Generation On-Line Ultrasonic Testing System, Using Real-Time Chirp Pulse Compression Processing
An Automatic Ultrasonic Testing System for the Butt Weld Zone of Gas Pipe Lines
The Ultrasonic Testing of Welding in Plastics
Negative Elastic Constants in Intermediate Valent SmxLa1-xS Determined by Brillouin Scattering
Estimation of Parametric Models for Double Transmission Experiments on a Viscoelastic Plate
Internal Friction in Magnesium and Magnesium Calcium Alloys Prepared by Rapid Solidification
Qualifying Indentation Fracture Toughness Testing by Ultrasonics
New Digital Techniques for Precise Measurement of Surface Wave Velocity with Acoustic Microscope
Estimation of Ultrasonic Source Distributions of Electroacoustic Transducers
A New Approach to Ultrasonic Image Reconstruction
Waveform Mapping of Piezoelectric Transducer Impulse Responses for Multi-Transducer Pattern Recognition-Based Ultrasonic NDE Systems
by "Nielsen BookData"