Proceedings of the first International Conference on Ceramic and Metal Matrix Composites : CMMC 96 : 9th-12th September 1996, San Sebastián, Spain
著者
書誌事項
Proceedings of the first International Conference on Ceramic and Metal Matrix Composites : CMMC 96 : 9th-12th September 1996, San Sebastián, Spain
（Key engineering materials, v. 127-131）
Trans Tech Pub., c1997
- : set
- pt. 1
- pt. 2
- タイトル別名
-
Ceramic and metal matrix composites-CMMC 96-
大学図書館所蔵 件 / 全2件
-
該当する所蔵館はありません
- すべての絞り込み条件を解除する
注記
Includes bibliographical references and indexes
内容説明・目次
内容説明
"Ceramic and Metal Matrix Composites" provide an update on this field, and identifies new problem areas. Newcomers will find that it provides a sound basis for learning how inorganic matrix composite materials are made and how they behave.
Volume is indexed by Thomson Reuters CPCI-S (WoS).
A total of 148 articles cover practically every area of current interest within the ambit of CMCs and MMCs.
目次
Laminates for Very High Temperature Creep Resistance
Ceramic Fibre Development and Characterisation
Interface Materials for Damage-Tolerant Oxide Composites
Structure and Stability of Synthetic Interphases in CMCs
Debond Crack Roughness, Interface Properties and Fiber Coating Design in Ceramic Composites
Development of Ceramic Matrix Composites and the Meaning of Microcracks
Novel Reaction-Based Processing of Co-Continuous Ceramic-Metal Composites
The Effect of Interfacial Characteristics on the Mechanical Performance of Particulate, Fibrous and Layered Metal Matrix Composites - A Review of some Recent Work
Properties of Continuous Fibre Reinforced Al- and Mg-Matrix Composites Produced by Gas Pressure Infiltration
Microstructural Optimization of Discontinuously-Reinforced Metal-Matrix Composites
Ultra-High Strength In Situ Composites Formed by Large Plastic Straining: Structure and Mechanical Properties Modelling
Fabrication of CMCs and MMCs Using Novel Processes
Status and Prospects for Metal Matrix Composites in Japan
The Application of CMCs in High Integrity Gas Turbine Engines
Properties of Amorphous SIBNC-Ceramic Fibres
Thermal Stability of a Silicon Nitride Based Fiber
The Growth of Alumina/YAG Eutectic Fibres by the Laser-Heated Floating Zone Process
Oxidation Behaviour of a SiC Based Fiber
Grain Growth in Alumina Polycrystalline Fibres During NiAl/Al2O3 Composite Processing
Influence of the Pyrolytic Carbon Fibre Coating on the Strength of Textron SiC Fibre in an Aluminium Matrix Composite
Processing and Properties of an Oxide/Oxide Composite
Hot Isostatically Pressed Silicon Carbide Fibre/Mullite Composites
Densification of Si3N4/Si3N4-Fibre Composites
Processing and Evaluation of RBSN Composite Containing SiC Filaments
The Fabrication, Microstructure and Fracture Behaviour of Unidirectional Carbon Fibre Reinforced C/SiC Dual Matrix Composites
Fabrication and Properties of Fiber- and Particulate-Reinforced SiC Matrix Composites Obtained with (A)HPCS as the Matrix Source
Preparation and Characterization of SiC/C/SiC Composites by Hybrid Wet/Vapour Processing
Reinfiltration Processes for Polymer Derived Fiber Reinforced Ceramics
Fibre Reinforced Silicon Carbide: Effect of Densification Method and Parameters
Si-C-O Fibre-Reinforced Ceramic Matrix Composites: Processing by Tape Casting and Properties
In-Situ Joined CMC Components
On the Formation of Aluminium Carbide During Al/C-Composite Production
Carbon Fibre Reinforced Copper Matrix Composites: Processing Routes and Properties
Manufacture of Hoop Reinforced Ti-MMC Rings by Spray/Wind Process
Bonding of SiC Fibre Reinforced Ti-6Al-4V MMC Sheet by Resistance Heating
Modelling Consolidation of Ti-6Al-4V / SiC Matrix-Coated Fibre Metal Matrix Composites
Thermodynamic and Experimental Modeling of Interfacial Reactivity in Metal Matrix Composites
The Production of Aligned Short Fibre Ceramic Matrix Composites Using a Twin Rolling Mill
Densification and Microstructural Evolution in a Reactive Silicon Nitride/Alumina Platelet System
Mechanosynthesis and Consolidation of Nanocrystalline VSi2/SiC Composite
Fabrication and Properties of Silicon Reinforced Titanium Nitride Composite
Microstructure and Properties of 3Y-TZP-5WT% SiC Composites
Ceramic and Ceramic Matrix Composites Based on Clinker Portland: Sinterability
Titanium-Based Composites Produced by Powder Metallurgy
Microstructure and Mechanical Properties of in Situ Ti/TiB MMCs Produced by a Blended Elemental Powder Metallurgy Method
Ceramic-Metal Composite Formation by Reactive Metal Penetration
Strengthening Porous Ceramics by Molten Metal Infiltration
Effect of Iron Addition on the Mechanical Properties of Al2O3-NiAl CMMCs
Effect of Particle Size on the Mechanical Properties of SiC Particulate Reinforced Aluminium Alloy AA6061
Effect of Alloying Additions on Threshold Pressure for Infiltration and Porosity of Aluminium-Based Melt Infiltrated Silicon Carbide Powder Compacts
A New Production Technology for Discontinuously Reinforced Al-SiC Composites
Effects of Pre-Compaction Annealing on Mechanical Properties of SiCp/Al Composites
Microstructure-Properties Relationship of AS9U3/SiCp Composites Formed by Sand and Permanent Mold Casting
Influence of Mg and Stirring on the Strength of an Aluminium Matrix Composite Obtained by Compocasting
Behavior of Ceramic Particles at Solid/Liquid Interface During Solidification of Metal Matrix Composites
A New Metal Matrix Composite: Al-AlN from Partially Nitrided Aluminum Powders
Cold Plastic Formability of Aluminium-Based MMCs
Assessment of the Forging Conditions of 6061/Al2O3/10p Using Processing Maps and Stability Criteria
High Speed Steel Sludge Waste as a Starting Material for Wear Resistance Components
Preparation and Characterization of SiC/SiC Microcomposites with Composition Graded C(B) Interphases
Zirconia Interface Layers Applied to Single Crystal Alumina Fibres by PVD and CVD
Laser Based Coating of Carbon Fibres for Manufacturing CMC
Silicon Carbide Laminates with Carbon Interlayers by Electrophoretic Deposition
Nanostructure and Mechanical Properties of Interlayers in Fibre Reinforced Composites
Interphase in Composite Materials
1D SiCf-YMAS Glass-Ceramic Composites: Microstructure, Interfaces and Creep Behaviour
Interfacial Micromechanical Characterisation of a Ceramic Matrix Composite
SiC/SiC Interface Characterisation Using Nanoindentation Techniques
Push-Out Tests on Small Fibres and Interfacial Properties of a Fibre-Reinforced Ceramic Matrix Composite (SiCf/SiC)
Interfacial Characterisation of MMCs and CMCs Using a SEM-Pushout Technique
A Comprehensive Approach to Understanding the Influence of the Fiber/Matrix Interface on the Properties of SiC Fiber/Ti-Alloy Composites
Processing-Related Interface Properties in Titanium Metal Matrix Composites
Study of Push-Out Micromechanical Test: Response of SCS-6/Ti-6242 Composite
The Effect of Interfacial Strength on the Response of Ti MMCs to Single Fibre Push-Out and Transverse Tensile Testing
Interfacial Studies in Titanium Aluminide/SiCf Composites
Assessment and Control of Surface Reactions of Carbon Fibres in Light Weight Metal Matrix Composites
Influence of Metal-Ceramic Interfaces on the Behaviour of Metal Matrix Composites and their Joints
Interface Analysis on Diffusion Bonded Bimetallic Composites. Part I: Extended Solid Solubility
Interface Analysis on Diffusion Bonded Bimetallic Composites. Part II: Formation of Intermetallics
First Matrix Cracking Behavior in Fiber Reinforced Ceramic Composites
A Quantitative Mesoscale Characterization of the Mechanical Behavior of Ceramic Matrix Composites
High Strain-Rate and High Temperature Tensile Behaviour of CAS/SiC
Experimental Technique for High Temperature and High Strain Rate Testing of CMCs
Fatigue and Friction Heating in Ceramic Matrix Composites
Mechanical Properties of Hi-Nicalon Fibre-Reinforced Silicon Nitride Matrix Composites
Mechanical Properties of Ceramic-Matrix Composites for Aeroengine Applications
Crack Growth in the 90 Degrees Plies and Creep of 2D SiCf-MLAS Composites
Microstructure of Cf-SiC Composites
Damage and Creep Mechanisms for a 2D SiCf Experimental Composite Material
Material Testing for Multiaxial Macroscopic Modelling of Ceramic Matrix Composites
Bending Test for CMC's Toughness Testing
Local Mechanical Characterisation of the Hi-Nicalon Fibre Reinforced - Si3N4 Ceramic Matrix Composite using Microindentation Tests
Mechanical Behaviour of Fibre-Reinforced Aluminium Alloy Plate and Tube
Fibre Damage in Silicon Carbide Reinforced Aluminium Alloy in Relation to Internal Stresses
Deformation and Failure of Monofilament-Reinforced Titanium under Axial Compressive Loading
Properties and Damage Mechanism in Three Classes of Titanium Composite Matrices
Measurement of Thermal Residual Stresses in Continuous Fibre Composites
Deformation of Continuous Carbon Fibre Reinforced Mg-Alloys by Thermally Induced Stresses
Analysis of the Mechanical Behaviour of Bimetallic Composites under Uniaxial Tension
Microstructure and Properties of MoSi2-SiC and MoSi2-Si3N4 Composites
The Role of Platelet Orientation on the Creep Behaviour of Al2O3/SiC Composites
Evaluation of R-Curve Behavior from Indented Strength in SiC Particle-Dispersed Al2O3 Composite
Growth of Small Surface Indentation Cracks in Alumina and Zirconia Toughened Alumina
Mechanical Properties of Newly Developed TiB2 Based Cermets
Influence of Microstructure on Mechanical Properties of Hypereutectic Al-Si Alloys
The Effect of Particle Clustering on the Deformation and Failure of Al-Si Reinforced with SiC Particles: A Quantitative Study
P/M Aluminum Composite Reinforced with Ni3Al
The Effect of Clustering on Damage Formation in Particulate Reinforced MMCs Deformed in Compression
Damage Nucleation and Growth in Particle Reinforced Aluminium Matrix Composites
Superplastic Deformation of the 2009-15%SiCw Composite
Structure and Texture Evolution of the Metal Matrix Composite PM2014 Al-20%Al2O3 during Superplastic Deformation
On the Structure and Strength of Severe Strained Metal Matrix Composite Al-30%SiCw
Mechanical and Microstructural Characterization of Al-SiC Composite Material Obtained by Dynamic Compaction
The Effects of SiCp Clusters and Porosity on the Mechanical Properties of PM Al Matrix Composites
Effect of Thermal Cycling on the Damping Behaviour of Mg Matrix Composites
Dislocation Generation in Mg Matrix Composites due to Thermal Cycling
Wear Behavior of Copper Matrix Composites
Wear and Mechanical Behaviour of PM High Speed Steels with Carbide Reinforcement
Influence of Phase Morphology and Deformation Mode on the Behaviour during Hot Working of a Two-Ductile Phase Composite
Study of the Role of the Interface Coherence on the Hot Deformation Behaviour of Duplex Stainless Steels
Tensile Fracture of Brittle Matrix Composites Reinforced with Continuous Fibres
An Explicit Behavioural Damage Model for the Design of Components in Ceramic Matrix Composites
Comparison between Experimental Stiffness Changes and Crack-Thickness-Dependent Predictions on a 1D SiC-SiC Composite
Interface Oxidation and Stress-Rupture of NicalonTM/SiC CFCCs at Intermediate Temperatures
Strain Redistribution around Holes and Notches in Fiber-Reinforced Cross-Woven Brittle Matrix Composites
Modelling of Matrix Cracking in Fibre-Reinforced Ceramics
Damage Evolution in a Continuous Fibre Reinforced CMC: Measurements and Modelling
Thermal Stress in Cylinders Made of Composite Materials
A Three-Dimensional Modeling of Transverse Matrix Cracking in Laminated Composites
The Contribution of Bridging Ligament Rupture to Energy Absorption during Fracture of Metal-Ceramic Laminates
Simulation and Assessment of Crack Behaviour in Discontinuously Reinforced Composite Materials
Creep of a Metal Matrix Composite with or without Diffusion and Sliding on Matrix/Reinforcement Interfaces
2-Dimensional Simulation of Crack Propagation in Al2O3 Matrix Composites Dispersed with SiC Particles
The Stress-Strain Relationship in Al356/SiC Particulate Composites
Modelling of Damage in Particulate Metal Matrix Composites
Cyclic Behavior of Metal-Matrix Composites: An Experimental and Theoretical Investigation
Investigation of Residual Stress Induced Crack Closure and its Effects on Fatigue in Metal Matrix Composites
A Numerical Study of Effect of Grain Boundaries on Elastic and Plastic Properties in Nanocomposite Materials
Functionally Graded Material Properties for Disks and Rotors
A Microstructural Approach to the Effective Transport Properties of MMCs and CMCs
Numerical Simulation of Plane Strain Compression Tests of a Bimetallic Composite
Thermodynamic Modelling and Experimental Studies in the Design of Integrated Oxidation Protection Systems for Ceramic Matrix Composites
The Use of Finite Element Analysis in the Design of Integrated Oxidation Protection Systems for Ceramic Matrix Composites
The Influence of Heat Treatment on the Tensile Strength of Single Fibre Composites (SiC Fibre / Titanium Alloy)
The Effect of W-Core/SiC Reaction on the Strength of SiC Fibers in SiC/Ti-Alloy Composites
Study of the Thermal Treatment of an Alumina Short Fibre Reinforced Aluminium Composite
Applications of CMCs to Turbojet Engines: Overview of the SEP Experience
Production of MMC-Wearparts
「Nielsen BookData」 より