Superplasticity in advanced materials : ICSAM-97 : proceedings of the 1997 International Conference on Superplasticity in Advanced Materials (ICSAM-97), held at the Indian Institute of Science, Bangalore on January 29 to 31, 1997

著者

• International Conference on Superplasticity in Advanced Materials
• Chokshi, Atul H.

書誌事項

Superplasticity in advanced materials : ICSAM-97 : proceedings of the 1997 International Conference on Superplasticity in Advanced Materials (ICSAM-97), held at the Indian Institute of Science, Bangalore on January 29 to 31, 1997

editor : Atul H. Chokshi

（Materials science forum, v. 243-245）

Trans Tech Publications, c1997

注記

Includes bibliographical refernces and indexes

内容説明・目次

内容説明

Interest in the phenomenon of superplasticity has been increasing steadily over the past two decades, both with regard to promoting fundamental scientific understanding as well as commercial application. Most of the early studies on superplasticity dealt with microduplex metallic alloys. The unabated interest in, and scientific research on, superplasticity has now broadened the scope of the topic to include intermetallic compounds, ceramics, composites and nanocrystalline materials.

目次

Towards a Theory of Cooperative Deformation Processes: The Case of Flow in Optimally Superplastic and Nanostructured Materials Some Toughts on Future Directions for Research and Applications in Superplasticity Key Issues of Grain Boundary Engineering for Superplasticity Extrinsic Grain Boundary Dislocations and the Micromechanisms of Superplastic Deformation Cooperative Processes During Superplastic Deformation A Superplasticity Approach Based on Shearing Bands Numerical Modeling of Superplastic Deformation Mechanisms On the Numerical Verification of a Mechanistic Model for Optimal Superplastic Flow On the Apparent Activation Energies for Superplastic Flow An Integrated Rheological Model of Superplastic Deformation Strain-Rate Sensitivity Index m: Definition, Determination, Narrowness Superplasticity as Universal Structural-Mechanical Phenomenon Microstructural Effects on Cavitation, Flow Localization and Fracture in Superplastic Metals Relating Grain Boundary Structure to Superplastic Deformation Grain Boundary Sliding Behavior during Superplastic Deformation in a Sn-Pb Eutectic Alloy Superplasticity in Si3N4 Associated with Rod-like Grain Alignment The Role of Flow Properties and Damage Accummulation in Superplastic Ductility of Al-Mg-Mn Alloys On the Possibility of Superplastictiy Enhanced by Dynamic Recrystallization Superplastic Behavior of AA7475 Aluminum Alloy Anisotropic Behavior and Constitutive Equations of Superplastic Deformation of Ti-6Al-4V and Ti-10V-2Fe-3Al Alloys A Quantitative Metallographic Technique for the Estimation of Relative Energy Distribution of Grain Boundaries in Polycrystalline Materials Cavitation during Multiaxial Deformation of Superplastic Forming The Nature of Influence of Reinforcing Element Distribution on Superplastic Deformation Behavior of a Metal Matrix Composite Usefulness of the R-type Specimen Method for Evaluation of Superplastic Characteristics Constitutive Models in Superplasticity / A Review Superplastic Constitutive Relation and Its Application Strain Induced Grain Boundary Premelting in Copper Bicrystals Evolution of Microstructures and Homogeneity in Superplastic Deformation Novel Superplasticity of Supercooled Liquid for Bulk Amorphous Alloys Superplastic Behaviour of Nanocrystalline Metallic Materials Synthesis and Processing of Nanostructured Oxide Ceramics: Implications for Superplasticity Phase Evolution and Densification of Spray Pyrolysed ZrO2-Al2O3 Powders Superplastic forming of Si3N4 and Si3N4/SiC Nanocomposites Processing of an Al-Mg-Li-Zr Alloy with Ultra-Fine Grain Size Superplasticity and Creep in Monoclinic and Y-PSZ Nano-grained Zirconia Nanocomposite Microstructure in a melt spun Al-Cu-Zr Alloy Superplasticity at High Strain Rates in Metals and Their Composites Critical Aspects of High Strain Rate Superplasticity Microstructure and Superplasticity in Al-Mg Alloy Composites Reinforced with Silicon Nitride Particles Analysis of the Threshold Stress in the Al-Ti Alloys Exhibiting High Strain Rate Superplasticity Physical Model of High Strain-Rate Superplasticity Cavitation in High Strain Rate Superplastic Metal Matrix Composite Effect of SiC Particulate Content on Superplastic Flow Stress of MA 2024Al-SiCp Composites The Origin of High Strain Rate Superplasticity Superplastic Characteristics in a Doubly-Extruded ZK60/SiC/17p Magnesium-Based Composite Aspects on Superplasticity in Fine-Grained Ceramics Amorphous Grain Boundary in Superplastic Ceramics Grain Boundary Characterization of Superplastic Ceramics by HREM and AEM High Temperature Deformation of Ceramics Simulated by Molecular Dynamics The Variation of Strain Rate with Stress in Superplastic Zirconia Constitutive Equation for Superplastic Flow of Fine-Grained Yttria-Stabilized Zirconia Polycrystals High Temperature Deformation and Densification in Alumina-Yttria Composites Elevated Temperature Flow Behavior of SiC-Borosilicate Composites An Investigation of the Sinter-Forging Characteristics of Alumina-Magnesia Composites: Implications for Superplasticity Cavitation Damage Mechanisms in a Superplastic Zirconia (3Y-TZP) Tensile Deformation Behaviour of a Superplastic 3mol.% Yttria Stabilized Zirconia Polycrystal (3Y-TZP) Microstructural Evolutions and Variations in Mechanical Properties of a Fine-Grained Yttria Stabilized Tetragonal Zirconia caused by Superplastic Deformations Characteristics of Superplastic Deformation in Dual Phase Alumina-Zirconia Composites Effects of Porosity on the Superplastic Properties of Submicronic Alumina-Zirconia Composites Superplastic Alumina - 20% Zirconia TEM Characterization of Grain Boundaries in Superplastic Al2O3-base Ceramics Superplastic Deformation of Fine Ceramics in Uniaxial Compression and Bending Strength Sol Gel Alumina and Mullite Coated SiC Precursors for Ceramic Matrix Composites Superplasticity of Metals: Phenomenology Based on Rheological Properties and Structural Dynamics Towards an Integration of Flow Behaviour and Microstructural Evolution during Superplastic Deformation of Microduplex Alloys Subscolidus Superplasticity of Aluminium Alloys Superplastic Deformation in two Microduplex Stainless Steels Effect of Cr on the Region I Superplastic Behaviour of an Al-33.3%Cu Alloy Internal Stress Superplastic Forming of Dual Phase Material Microstructural Evolution in Ultrafine-grained Two-phase Alloys: Theory and Experiment Grain Boundary Structure and Composition Following Superplastic Deformation of Al-Mg Alloys A Study of Superplasticity in a Zr-2.5wt%Nb pressure Tube Alloy Load Relaxation Behavior of Superplastic Al Alloys Superplasticity of Al2O3f/6061 Aluminium Matrix Composite Superplasticity of fine TiB dispersed Ti-6Al-4V Alloy Composites obtained by Reaction Sintering Influence of Superplastic Deformation on the Corrosion Resistance of Aluminum Alloys with Microcrystalline Structure Application of EBSP Methods to Analyze Continuous Grain Refinement Processes in Supral 2004 Superplasticity in Advanced Titanium Base Materials Low Temperature Superplasticity of Magnesium Alloys Processed by ECAE A Reinvestigation of the Mechanical History on Superplasticity of Zn-22Al-2Cu at Room Temperature Superplasticity of Nickel-Based Alloys with Submicrocrystalline Structure The Evolution of Grain Structure during Superplastic Deformation of AA8090 Al-Li Alloy Micromechanical Investigation and Phenomenological Modeling of Al-8090 Superplastic Materials Isothermal Forging and TMP for Development of Superplasticity in Al-Li Alloy Low Temperature Superplasticity of Submicrocrystalline Titanium Alloys Effect of Initial Structure On Grain Refinement to Submicron Size in Al-Mg-Li Alloy Processed by Severe Plastic Deformation Near Room Temperature Activation Energy Associated with Structural Superplastic Zn-20.2% Al-1.8%Cu Low-Temperature Superplasticity in EB PVD Titanium Alloys Superplasticity in Intermetallics Superplastic Behavior of Large Grained Iron Alluminides Microstructural Transformations Associated with Superplastic Deformation of a Ti3Al Based Intermetallic Alloy Effect of Superplastic Processing on Room Temperature Ductility of Gamma Titanium Aluminide Industrial Applications of Superplasticity - A Vision of the Future Applications of Ceramic Superplasticity Challenges and Opportunities Superplastic Forming of Zircaloy-2 Pressure Tube Material Diffusion Bonding of Dissimilar Superplastic Titanium Alloys Objective Modelling of Diffusion Bonding in Superplastic Duplex Stainless Steels Superplasticity and Solid State Bonding of Materials Recent Advancements in Superplastic Forming and Diffusion Bonding (SPF/DB) Technology Mechanical Properties of the Wing Slat Produced by SPF/DB Technology Studies on SPF/DB Technology of Aluminum-Lithium Alloys Application of Processing Maps in the Quality Assessment of Engineering Components - An Indian Experience Finite Element Modeling of Superplastic Forming Using Analytical Contact Surfaces A Finite Element Modelling for Superplastic Bulging of Titanium Alloy Tube and Pressure Path Optimization Design in Superplastic Forming Process by Rigid Visco Plastic Shell FEM On the Thinning Profiles in Superplastic Forming of a Modified 5083 Aluminum Alloy Stress - Strain State of a Blank in Superplastic Bulk Forming under Mutual Influence of Material Rheology and Contact Friction Engineering Calculation of Metal Extruxion Deformation Force in the Condition of Superplasticity The Computer Tecnology of Creating Lubricants for Superplastic Deforming Process Solid State Joint Formation of the Titanium Alloy VT6S under Superplastic Forming Conditions Superplastic Forming of Sandwich Cellular Structures from Titanium Alloy Superplastic Forming of a Ti3 Al Alloy and Its Application in Aerospace

「Nielsen BookData」 より

詳細情報

• NII書誌ID(NCID): BA29867921
• ISBN:
  • 0878497595
• 出版国コード: sz
• タイトル言語コード: eng
• 本文言語コード: eng
• 出版地: Zuerich, Switzerland
• ページ数/冊数: xv, 790 p.
• 大きさ: 25 cm
• 親書誌ID:
  • BA00294222