Superplasticity in advanced materials : ICSAM-97 : proceedings of the 1997 International Conference on Superplasticity in Advanced Materials (ICSAM-97), held at the Indian Institute of Science, Bangalore on January 29 to 31, 1997
Author(s)
Bibliographic Information
Superplasticity in advanced materials : ICSAM-97 : proceedings of the 1997 International Conference on Superplasticity in Advanced Materials (ICSAM-97), held at the Indian Institute of Science, Bangalore on January 29 to 31, 1997
(Materials science forum, v. 243-245)
Trans Tech Publications, c1997
Available at / 5 libraries
-
No Libraries matched.
- Remove all filters.
Note
Includes bibliographical refernces and indexes
Description and Table of Contents
Description
Interest in the phenomenon of superplasticity has been increasing steadily over the past two decades, both with regard to promoting fundamental scientific understanding as well as commercial application. Most of the early studies on superplasticity dealt with microduplex metallic alloys. The unabated interest in, and scientific research on, superplasticity has now broadened the scope of the topic to include intermetallic compounds, ceramics, composites and nanocrystalline materials.
Table of Contents
Towards a Theory of Cooperative Deformation Processes: The Case of Flow in Optimally Superplastic and Nanostructured Materials
Some Toughts on Future Directions for Research and Applications in Superplasticity
Key Issues of Grain Boundary Engineering for Superplasticity
Extrinsic Grain Boundary Dislocations and the Micromechanisms of Superplastic Deformation
Cooperative Processes During Superplastic Deformation
A Superplasticity Approach Based on Shearing Bands
Numerical Modeling of Superplastic Deformation Mechanisms
On the Numerical Verification of a Mechanistic Model for Optimal Superplastic Flow
On the Apparent Activation Energies for Superplastic Flow
An Integrated Rheological Model of Superplastic Deformation
Strain-Rate Sensitivity Index m: Definition, Determination, Narrowness
Superplasticity as Universal Structural-Mechanical Phenomenon
Microstructural Effects on Cavitation, Flow Localization and Fracture in Superplastic Metals
Relating Grain Boundary Structure to Superplastic Deformation
Grain Boundary Sliding Behavior during Superplastic Deformation in a Sn-Pb Eutectic Alloy
Superplasticity in Si3N4 Associated with Rod-like Grain Alignment
The Role of Flow Properties and Damage Accummulation in Superplastic Ductility of Al-Mg-Mn Alloys
On the Possibility of Superplastictiy Enhanced by Dynamic Recrystallization
Superplastic Behavior of AA7475 Aluminum Alloy
Anisotropic Behavior and Constitutive Equations of Superplastic Deformation of Ti-6Al-4V and Ti-10V-2Fe-3Al Alloys
A Quantitative Metallographic Technique for the Estimation of Relative Energy Distribution of Grain Boundaries in Polycrystalline Materials
Cavitation during Multiaxial Deformation of Superplastic Forming
The Nature of Influence of Reinforcing Element Distribution on Superplastic Deformation Behavior of a Metal Matrix Composite
Usefulness of the R-type Specimen Method for Evaluation of Superplastic Characteristics
Constitutive Models in Superplasticity / A Review
Superplastic Constitutive Relation and Its Application
Strain Induced Grain Boundary Premelting in Copper Bicrystals
Evolution of Microstructures and Homogeneity in Superplastic Deformation
Novel Superplasticity of Supercooled Liquid for Bulk Amorphous Alloys
Superplastic Behaviour of Nanocrystalline Metallic Materials
Synthesis and Processing of Nanostructured Oxide Ceramics: Implications for Superplasticity
Phase Evolution and Densification of Spray Pyrolysed ZrO2-Al2O3 Powders
Superplastic forming of Si3N4 and Si3N4/SiC Nanocomposites
Processing of an Al-Mg-Li-Zr Alloy with Ultra-Fine Grain Size
Superplasticity and Creep in Monoclinic and Y-PSZ Nano-grained Zirconia
Nanocomposite Microstructure in a melt spun Al-Cu-Zr Alloy
Superplasticity at High Strain Rates in Metals and Their Composites
Critical Aspects of High Strain Rate Superplasticity
Microstructure and Superplasticity in Al-Mg Alloy Composites Reinforced with Silicon Nitride Particles
Analysis of the Threshold Stress in the Al-Ti Alloys Exhibiting High Strain Rate Superplasticity
Physical Model of High Strain-Rate Superplasticity
Cavitation in High Strain Rate Superplastic Metal Matrix Composite
Effect of SiC Particulate Content on Superplastic Flow Stress of MA 2024Al-SiCp Composites
The Origin of High Strain Rate Superplasticity
Superplastic Characteristics in a Doubly-Extruded ZK60/SiC/17p Magnesium-Based Composite
Aspects on Superplasticity in Fine-Grained Ceramics
Amorphous Grain Boundary in Superplastic Ceramics
Grain Boundary Characterization of Superplastic Ceramics by HREM and AEM
High Temperature Deformation of Ceramics Simulated by Molecular Dynamics
The Variation of Strain Rate with Stress in Superplastic Zirconia
Constitutive Equation for Superplastic Flow of Fine-Grained Yttria-Stabilized Zirconia Polycrystals
High Temperature Deformation and Densification in Alumina-Yttria Composites
Elevated Temperature Flow Behavior of SiC-Borosilicate Composites
An Investigation of the Sinter-Forging Characteristics of Alumina-Magnesia Composites: Implications for Superplasticity
Cavitation Damage Mechanisms in a Superplastic Zirconia (3Y-TZP)
Tensile Deformation Behaviour of a Superplastic 3mol.% Yttria Stabilized Zirconia Polycrystal (3Y-TZP)
Microstructural Evolutions and Variations in Mechanical Properties of a Fine-Grained Yttria Stabilized Tetragonal Zirconia caused by Superplastic Deformations
Characteristics of Superplastic Deformation in Dual Phase Alumina-Zirconia Composites
Effects of Porosity on the Superplastic Properties of Submicronic Alumina-Zirconia Composites
Superplastic Alumina - 20% Zirconia
TEM Characterization of Grain Boundaries in Superplastic Al2O3-base Ceramics
Superplastic Deformation of Fine Ceramics in Uniaxial Compression and Bending Strength
Sol Gel Alumina and Mullite Coated SiC Precursors for Ceramic Matrix Composites
Superplasticity of Metals: Phenomenology Based on Rheological Properties and Structural Dynamics
Towards an Integration of Flow Behaviour and Microstructural Evolution during Superplastic Deformation of Microduplex Alloys
Subscolidus Superplasticity of Aluminium Alloys
Superplastic Deformation in two Microduplex Stainless Steels
Effect of Cr on the Region I Superplastic Behaviour of an Al-33.3%Cu Alloy
Internal Stress Superplastic Forming of Dual Phase Material
Microstructural Evolution in Ultrafine-grained Two-phase Alloys: Theory and Experiment
Grain Boundary Structure and Composition Following Superplastic Deformation of Al-Mg Alloys
A Study of Superplasticity in a Zr-2.5wt%Nb pressure Tube Alloy
Load Relaxation Behavior of Superplastic Al Alloys
Superplasticity of Al2O3f/6061 Aluminium Matrix Composite
Superplasticity of fine TiB dispersed Ti-6Al-4V Alloy Composites obtained by Reaction Sintering
Influence of Superplastic Deformation on the Corrosion Resistance of Aluminum Alloys with Microcrystalline Structure
Application of EBSP Methods to Analyze Continuous Grain Refinement Processes in Supral 2004
Superplasticity in Advanced Titanium Base Materials
Low Temperature Superplasticity of Magnesium Alloys Processed by ECAE
A Reinvestigation of the Mechanical History on Superplasticity of Zn-22Al-2Cu at Room Temperature
Superplasticity of Nickel-Based Alloys with Submicrocrystalline Structure
The Evolution of Grain Structure during Superplastic Deformation of AA8090 Al-Li Alloy
Micromechanical Investigation and Phenomenological Modeling of Al-8090 Superplastic Materials
Isothermal Forging and TMP for Development of Superplasticity in Al-Li Alloy
Low Temperature Superplasticity of Submicrocrystalline Titanium Alloys
Effect of Initial Structure On Grain Refinement to Submicron Size in Al-Mg-Li Alloy Processed by Severe Plastic Deformation
Near Room Temperature Activation Energy Associated with Structural Superplastic Zn-20.2% Al-1.8%Cu
Low-Temperature Superplasticity in EB PVD Titanium Alloys
Superplasticity in Intermetallics
Superplastic Behavior of Large Grained Iron Alluminides
Microstructural Transformations Associated with Superplastic Deformation of a Ti3Al Based Intermetallic Alloy
Effect of Superplastic Processing on Room Temperature Ductility of Gamma Titanium Aluminide
Industrial Applications of Superplasticity - A Vision of the Future
Applications of Ceramic Superplasticity Challenges and Opportunities
Superplastic Forming of Zircaloy-2 Pressure Tube Material
Diffusion Bonding of Dissimilar Superplastic Titanium Alloys
Objective Modelling of Diffusion Bonding in Superplastic Duplex Stainless Steels
Superplasticity and Solid State Bonding of Materials
Recent Advancements in Superplastic Forming and Diffusion Bonding (SPF/DB) Technology
Mechanical Properties of the Wing Slat Produced by SPF/DB Technology
Studies on SPF/DB Technology of Aluminum-Lithium Alloys
Application of Processing Maps in the Quality Assessment of Engineering Components - An Indian Experience
Finite Element Modeling of Superplastic Forming Using Analytical Contact Surfaces
A Finite Element Modelling for Superplastic Bulging of Titanium Alloy Tube and Pressure Path Optimization
Design in Superplastic Forming Process by Rigid Visco Plastic Shell FEM
On the Thinning Profiles in Superplastic Forming of a Modified 5083 Aluminum Alloy
Stress - Strain State of a Blank in Superplastic Bulk Forming under Mutual Influence of Material Rheology and Contact Friction
Engineering Calculation of Metal Extruxion Deformation Force in the Condition of Superplasticity
The Computer Tecnology of Creating Lubricants for Superplastic Deforming Process
Solid State Joint Formation of the Titanium Alloy VT6S under Superplastic Forming Conditions
Superplastic Forming of Sandwich Cellular Structures from Titanium Alloy
Superplastic Forming of a Ti3 Al Alloy and Its Application in Aerospace
by "Nielsen BookData"