Euro ceramics V : extended abstracts of the 5th Conference and Exhibition of the European Ceramic Society, Versailles, France, June 22-26, 1997

著者

• European Ceramic Society
• Abelard, P.
• Baxter, J.

書誌事項

Euro ceramics V : extended abstracts of the 5th Conference and Exhibition of the European Ceramic Society, Versailles, France, June 22-26, 1997

organized on behalf of the European Ceramic Society by the Groupe Français de la Céramique

（Key engineering materials, v. 132-136）

Trans Tech Pub., c1997

• : set
• pt. 1: sessions 1A, 1C, 1D, 3
• pt. 2: sessions 1B, 2A, 2B, 4
• pt. 3: sessions 6, 7, 8, 10, 11, 12

注記

Volume editors: v. 1-2, P. Abelard ...[et al.] v. 3, J. Baxter ...[et al.]

Includes bibliographical references and indexes

内容説明・目次

内容説明

Comprising more than 580 papers, the aim of this 3-volume set is to provide the reader with a comprehensive overview of the relevant trends in the research and development of all aspects of ceramics. It will constitute an excellent reference source for every researcher working in the field.

目次

• Hydrothermal Processing of Perovskite PbTiO3 Powders Extraction of Binders with Supercritical Carbon Dioxide Nanostructured Ceramics via Microemulsion Processing Routes Novel Ceramic Processing Methods Using Responsive Polymers Direct Study of Size Effect at Gel-Sol Preparation of Stabilized Zirconia in the ZrO2-Yb2O3 System with use of Synchrotronic Irradiation Urea-Formaldehyde as a Precursor for the Preparationof Alumina-Zirconia Composites by Sol-Gel Polymeric Route Urea Formaldehyde as a Precursor for the Preparation of Titania by Sol Gel Polymeric Route PZT-Piezoceramic Derived from Emulsion Powder Sol-Gel Method used for Synthesis of Ceramic Pigments Preparation of Bismuth Layered Oxide Powders by Chemical Routes: Molten Salts and Sol-Gel Syntheses Hafnia and Hafnia-Zirconia Mixed Oxide Ultra Spherical Microspheres Made by a Sol-Gel-Vibrational Dropping Process Aluminium Titanate-25vol% Mullite Composite Powder Obtained by Different Processing Methods Synthesis and Sintering Behavior of Nanocrystalline ZrO2 - 3 mol% Y2O3 Powders Epitaxial Zirconia Films on(11-20) Planes of Sapphire Effect of Praseodymium Doping on the Properties of Ca-FSZ Obtained by Gel Methods Study of Synthesis Methods to Obtain the Ceramic Pigment Pink Coral, Fe-ZrSiO4 Chemical Preparation of Pb(Zn1/3Nb2/3)O3 - Pb(Fe1/2Nb1/2)O3 Powders from Nitrate Solutions Aspects Regarding the Formation of the Spinel Phase in the MeO-Al2O3 and MeO-TiO2 Systems Effect of seeding on -Al2O3 Powder Formation from Bayerite and Bohemite Synthesis by Coprecipitation and Characterisation of Materials Obtained from the System NiO-Al2O3-SiO2 Wet Chemical Preparation of Doped Barium Titanate Powders and Ceramics Solid Solution La2-xSrxNiO4 Preparation by the Citrate Method A New Solution Way to Prepare Hydroxyapatite Powders Powders Agglomeration Grade in the ZrO2-Y2O3 Coprecipitation Process Preparation Conditions and Sintering Ability of Ceramic Powders High Stability Ceramic Pigments Stabilisation of Transition Aluminas by Alkaline Earth Ions Preparation and Characterization of Metastable ZrO2/Al2O3 Solid Solution Controlled Morphology of Nickel Manganite Powders Spinel Pigments in the ZnO-CoO-Al2O3-Cr2O3 System Prepared from Organometallic Precursors Hydrothermal and Activated Solid State Syntheses of SrTiO3 Fine Powders Mechanism of the Hydrothermal Crystallisation of Zirconia Hydrothermal Synthesis and Properties of BaTiO3 Powder Destined for PTCR Ceramics Hydrothermal Synthesis of Colloidal Zirconia Cerium Stabilized Zirconia by Mixing Hydrothermally Synthesized Monoclinic Zirconia with Cerium Nitrate Synthesis and Growth Mechanism of ThO2-W Nanocomposite Powder Laser Synthesis of Nanometric Si/C/O Powders from an Aerosol of Hexamethyldisiloxane Calorimetric Study of the Thermal Induced Transformations of Ultrafine Silicon Carbide Powder Produced by RF Glow Discharge Reactions between SiCl4 and NH3 Leading to the Formation of Silicon Nitride Powders Nanosize Powders Prepared by Flame Pyrolysis Novel Ceramic Matrix Nanocomposite Powders Containing Carbon Nanotubes Production of Nanosized Zirconia-Particles by CO2 Laser Evaporation Al2O3-SiC Nanocomposites Obtained through the Dispersion of Nonometric Powders The Influence of the Preparation Conditions of Nanocrystalline Zirconia on Powder Processing and Ceramic Properties Producing Al and Al2O3 Nanopowders by Electrical Explosion of Wire TEM Studies of Nanometric Ceramic Oxide Powders Prepared by Ball-Milling Influence of the Synthesis Route on the Characteristics of Zirconia Nanomaterials Ceramics from Fine Plasma-Processed AlN Powder Characterization of Oxycarbide Glasses Prepared by Melt Solidification Direct Crystallization of BaTiO3 Glass Ceramics Synthesis of Spinel Powders by the Spray Pyroloysis Method Synthesis and Characterization of Transition Metal Carbide Whiskers Ni/Alumina Catalysts Produced by Combustion Synthesis Combustion Synthesis of Aluminium Titanate: Thermal Stability Size Distribution of Ultrafine Spherical Ceramic Powders Obtained by Ultrasonic Spray Pyrolysis Preparation of LaCrO3 Based Materials by Autoignitation of Citrate- Nitrate Gel Preparation of Plasma Sprayable - Whitlockite Powder Synthesis of LiAlO2 and LiGaO2 by Ion Exchange Reaction Synthesis of Mullite Precursors in Molten Salts Influence of the Aluminium Source of Salt Point Defects Effect on the Sintering of Alumina Modification of the Surface Properties of a Titania Nanopowder by Grafting: A Fourier Transform Infrared Analysis The Ceramic Humidity Sensors on the Base of MgAL2O4 On Peculiarities of Non-Isothermal Synthesis of fine Ferroelectric Powders Effects of Heat Treatments on the Local Order in Si/C/N Nanopowders Studied by X-Ray Photoelectron Spectroscopy Identification of Barium Carbonate in Barium Titanate powders Methylene-Blue Adsorption on Latvian Clay Powders Study of Vaporization during Heat Treatment of -Spodumene and -Cordierite Sol-Gel Powders HRTEM and XRD Study of the Crystallization of Zirconia Precipitate: an Explanation of the Well Known ''Glow Effect'' FT- IR Spectroscopy as a Method for the Study of the Different Crystallization Forms of CaCo3 Improved Characterisation of Ceramic Powder Surfaces - A Comparison of Different FTIR-Spectroscopy Methods Study of Malayaite Synthesis CaSnSiO5 Optimisation of Ceramic Suspensions Aqueous Silicon Nitride Suspension: Effect of Surface Treatment on the Rheological and Electrokinetic Properties Dispersion, Stabilisation and Casting of Calcium Carbonate Suspensions Influence of Iso-Propyl Alcohol Addition on the Electrophoretic Deposition of SiC from a Mixture of Acetone and n-Butylamine Zirconia-Toughened Alumina (ZTA) with Improved Homogeneity for Tribological Applications The Interaction of Barium Titanate with an Aqueous Suspending Medium The Effect of pH on Barium Titanate Aqueous Suspensions Aqueous Suspensions of Al2O3/SiC Mixed Systems Colloidal Processing of Alumina with MgO Additions ESA Measurement of Electrokinetic Properties-Possibilities and Limitations Shear-Dependent Behaviour of Calcium Carbonate Aqueous Suspension Aqueous Processing of Carbothermally Prepared Ca- -SiAlON and -SiAlON Powders: Powder and Suspension Characterisation Characterization of Alumina Suspension by Electroacoustics Characterisation of Organic Additives and their Adsorption Behaviour on Alumina Particle Surfaces using HPLC Development of Ceramic Inks for Jet Printing: Effect of Conductivity Cost Effective Reliable Silicon Nitride for High Performance Structural Applications Correlation Between Rheological Behaviour of Alumina Slips and Characteristics of Pressure Cast Bodies Industrial Pressure Casting of High Alumina Ceramics Drying of Aqueous Ceramic Suspensions Influence of Magnesia on Drying-Shrinkage Behaviour of Alumina Aqueous Tape-Casting of Silicon Carbide Utilisation of Alumina Green Tapes Obtained by Tape Casting of Aqueous Slurry for the Fabrication of Straight or Curved Thin Ceramic Tubes Centrifugal Slip Casting of Alumina Influence of Slip Viscosity on the Mechanical Properties of High Purity Alumina Made by Gelcasting Improvement of Mechanical Properties of Green Powder Compacts by Using Novel Binder System Constant Pressure Filtration of Compressible Ceramic Powder Compacts Thermal Resistance of Porous Alumina Ceramics Prepared from the Spray Pyrolyzed Powders Dry Compaction of Alumina Granules. Influence of the Binder System Glass Transition Temperature The Effect of Lubricants on Closure of Large Pores During Powder Compaction Compacting Mechanisms of a Multicomponent Atomized Ceramic Powder Principles of Pulsed Compaction of Ceramic Nano-Sized Powders Characterization of PZT Powder Prepared by Spray Drying The Effect of Dispersion and Atomisation Conditions on the Compaction Response of Silicon Nitride Granules Measurement on the Effect of Absolute Pressure on the Extrusion Properties of Ceramic Pastes Microstructure Formation in Ceramic Injection Molding The Influence of Binder Properties on the Plasticity and the Properties of Raw Extruded Ceramics Lamination of Ceramic Green Tapes Extruded Aluminium Nitride-Manufacture, Properties and Application A Novel Method for Preparing Porous Alumina Objects Green Machining of Alumina Effect of Moulding Pressure on Pore Structure Near Net Shaping of Complex Components by Hot Moulding Low-Shrinkage Mullite Derived from Filled Polymeric Siloxanes The Peel Adhesion Test for Metal-Ceramic Interfaces Reliability of Ferrite Cores in Applications and Quality Control Tests On the Hardness and Brittleness of Ceramics Effect of Grinding Parameters on the Strenght and Reliability of Al2O3 Effect of Surface Grinding on the Reliability of Alumina The Transition from Palmquist to Median-Radial Crack Systems Within WC-Co Cermets Direct Measurement of Friction Applicable to Hot Strength Measurements Fracture Behaviour of Ceramic Foils in Uni- and Biaxial Tension A Simple Technique for Fracture Toughness Measurements Using Specimens with Very Thin Notches Development of a Bending-Test Device for Small Samples Crack Branch Lengths and Fracture Feature Sizes in Biaxially Stressed Glass Discs Dynamic Fatigue of Glass-Bonded Alumina Ceramics Study of R-Curve Behaviour in alumina by In Situ Observation of Stable Indentation Crack Growth The Non-Linear Mechanical Behaviour of High Performance Refractories Mechanical Properties of the Ti3SiC2 - TiC Material Slow Crack Growth in 3Y-TZP under Static and Cyclic Fatigue Increase in Fracture Toughness of Monolithic Ceramics by a Partial Reduction Treatment Improvement of the Mechanical Properties of Magnetic Ceramics Thermomechanical Behaviour of TiB2-AlN Composites Mechanical and Microstructural Characterization of SiC Materials Hot-Pressed from and Powders Fracture Characteristics of Abrasive Particles Applicability of LEFM to Coarse-Grained Ceramics and Composites Fabrication, Structure and Properties of In-Situ Reinforced Si3N4 Ceramics from Sol-Gel Derived Oxide-Additive-Coated Powders Biaxial Fatigue of Sintered Hydroxylapatite Technological Aspects at Development of 2.5 MW Stationary GTE Ceramic Components Structures Anisotropic Deformation and Fracture of Indented PZT Microstructure Development in Superplastic Silicon Nitride Observation of Different Interfaces in Silicon Nitride by HRTEM. Influence of the Microstructure on the Creep Properties. Shear Viscosity of an Oxynitride Glass Interlayer Compressive Deformation of Low-Doped Silicon Nitride Ceramics with Different Microstructures High Temperature Behaviour of a Zircon Ceramic Compressive Deformation of Fine-Grained Al2O3 in a Reducing Environment High Temperature Compression Tests Performed on Doped Fuels Long-Term (>30,000-40,000 h) Creep Behavior of an Advanced Si3N4 Ceramic High Temperature Creep of Polycrystalline Mullite High Temperature Mechanical Properties and Creep Behaviour of Different Mullites Thermomechanical Properties and Creep of Mullite from Rapidly Quenched Powders Effect of Specimen Size on Thermal Shock Properties of an Alumina Thermal Shock of Ceramic Material: Damage Resistance Parameters and Critical Flaw Size Quantitative Approach of the Effective Coefficient of Heat Transfer During Quenching Vickers Indented Ceramic Samples Toughness and Thermal Shock Resistance of Melt-Textured YBaCuO Ceramic Superconductors Study of the Relationship Between Microstucture, Fatigue and Thermal Shock Behaviour of Si3N4 Thermo-Mechanical Behaviour of Structural Ceramics Submitted to Mild Thermal Shocks Mesoscopic Modeling of the Intergranular Structure of Y2O3 Doped Aluminium Nitride and Application to the Prediction of the Effective Thermal Conductivity Effect of Particle Size on the Thermal Shock Behaviour of a Zirconia Refractory Partially Stabilised with Magnesia The Effect of Powder Processing Route on the Hydrothermal Degradation of Y-TZP Low Temperature Ageing of 3Y - TZP: Influence of the Microstructure Thermal Fatigue Behaviour of Controlled Surface Flaws in Alumina Microstructural Damage in Hafnium Diboride Under Neutron Irradiation Phase Transformation of Gd4Al2O9 at High Temperature Measurement of Grain Boundary Sliding by Atomic Force Microscopy in Superplastically Deformed Ceramics Internal Friction Decrease in Silicon Nitride Due to Crystallization of Intergranular Phases High Temperature Microplasticity of Fine-Grained Y-TZP Zirconia Studied by Mechanical Spectroscopy 'Photothermal Characterisation of Microelectronics Ceramics at Various Scales' High Temperature Tensile Testing Apparatus for Industrial Ceramics Characterization Shape Prediction Procedure for Die Pressed Ceramic compacts Structure Development During Linear Heating and Rate-Controlled Sintering of Ceramics: Statistical Model and Experiment Modelling of Binder Burnout Process for Ceramic Compacts Modelling of Thermal Shock Behaviour Finite Element Modeling of Binder Removal from Ceramic Moldings Numerical Simulation of Alumina Fracture Rheological Analysis of Stress-Strain Hysteresis in Silicon Nitride at High Temperature Experimentally Verified Numerical Analysis of Internal Thermal Stresses in Alumina Ceramics with Grain Size Effect Creep Damage Model for Ceramics Stress Distribution in Silicon Nitrice Joints with Metallic Interlayers Computational Modeling of Sintering Process in Ceramics Modelling of Subcritical Crack Growth in MnZn Ferrites Graphic Simulation of STM Images of Si(111)7X7 Surface Conductive Mode Imaging for Grain Boundary Property Determination in Electroceramics AFM Investigation of Electrical Double Layers on SiO2 Surfaces Quantitative Determination of Density Gradients by Three-Dimensional Computertomography (3D-CT) Investigation of Hardness and Elastic Contants on Silicon Nitride Based Composites by Recording Micro Hardness Tester Dense and Nanostructured Ceramics by Low-Temperature Pressureless Sintering of Nanosized Y-TZP Powders Synthesis and Characterization of Alumina Matrix Nanocomposites Containing Carbon Nanotubes Microstructure and Mechanical Properties of Ti(C,N)-Mo2C-(Ni,Co) Cermets as a Function of their Initial Chemical Composition Origins and Avoidance of Colour Inhomogeneities in Silicon Nitride Ceramics On the Valence States of Yb, Sm and Eu Ions in -Sialon Based Ceramics Superstructure of C3S Polymorphs Stabilised Zirconium Dioxide in the MgO-CeO2-ZrO2 Ternary System Fanning Laser Light Application to the Characterization of Bi12TiO20 and Bi12SiO20 Crystals Solubility of Erbium, Praseodimium and Vanadium in ZrO2, ZrO2-CeO2 and ZrO2-Y2O3 Decomposition of Nitrous Oxide over Perovskite Type Mixed Oxides Tie-Lines to '-sialon in the Si-Al-O-N Phase Diagram Properties of Novel Ceramic Materials in the BaO-Al2O3-AlN-MgO System with a -Alumina Type Structure Diffusional Properties of Tic at High Temperatures Subsolidus Equilibria in the Sn-Sb-Cu-O System Structural Characterisation of New Y-Si-Al-O-N Oxynitride Glass Ceramics The Driving Force for - Transformation in Rare Earth Sialon Ceramics Novel Calcium Phosphate/Polylactide Composites: Its In Vitro Evaluation MoSi2 Self-Purification Through High-Temperature Synthesis Thermodynamics and Kinetics of Decomposition of Al2TiO5-Base Ceramics Preparation of Pure B-Phase Glass-Ceramic in the Yttrium SiAION System Elaboration of Composites by Reactive Sintering of AIB2 and TiN Powders Study on the Sintering of Aluminium Titanate-Mullite by Using a Constant Heating Rate Low-Thermal Expansion Zirconyl Phosphate Ceramic Reaction Kinetic in the ZrO2 - Li2O System Effect of Isomorphous Substitutions on Crystallization of Fluorrichterite Glasses Comparison of Preparation Mechanism of Al2TiO5 during Various Heat Treatment Techniques A Mechanism for Aluminium Powder Nitridation Solid State Reactions in the Sb-Sn-Cu-O System Studied by IR Spectrometry Solid State Reactions in Al2TiO5-Al6Si2O13-Al2O3 Subsystem, Using Reactive Powders Enamels Cristallographic Transformations Study by High Temperature X-Ray Diffraction: Application to Fast Firing in Fine Ceramic Field The High Temperature Transformation of Petalite Aluminium Oxycarbide Formation on Carbon-Coated Al2O3.MgO Spinel Solid State Reaction between Tantalum (Ta) and Tantalum Carbide (TaC) Powders during Hiping Microstructural Development during the Sintering of Sepiolite Sintering of ZrO2 - CeO2 - Y2O3 Alloys: Influence of Powder Preparation Preparation and Fabrication of Lithium Titanate Ceramics Densification of Diatomite and Microporous Structure Formation via Heat Treatment Mullite Synthesis from Sol-Gel Method Densification and Grain Growth Kinetic for Silicon Nitride Experimental and Computational Study for Grain Growth in AlN Based Ceramics Effect of Slip Conditions on the Microstructure of Supported -Alumina Layers Phase Transformation and Sintering of -Al2O3-Effects of Powder Characteristics and Dopants (Mg or Y) Sintering of Magnesia Doped Sol-Gel Alumina Parameters Influencing the Preparation of Coarse Grained Al2O3 Ceramics Oxidizing Sintering Behaviour of UO2+x-Lanthanide Oxide Compounds Preparation of Translucent SnO2 Ceramics by Natural Sintering BaTiO3-Ceramics Structure and Consolidation Process Indium Oxide Ceramics with Titania Additions Sintering Study of Hyperstoichiometric Powder Compacts of UO2+x-(6mol%)PuO2 Sintering Conditions and Resulting Properties of Solid State Sintered Silicon Carbide Phase Evolution during the Nitridation of Silicon with a Clay Additive Synthesis and Characterization of Metal-Mg0.9Al2O4 and ZrO2-MgAl2O4 Composites Microstructure Development of Ni-YSZ Composite Materials Prepared by Gel-Precipitation Method Effect of Y-PSZ Additive on the Structure, Thermal Behaviour and Mechanical Properties of -Spodumene Ceramic Seeding for the Development of Unique Microstructures Study of a Multilayer-Based Technique with Sintering Additives for Microstructuring of Single-Phase Ceramics Development of Opacities Materials for Glazes Ceramics Elaboration and Characterization of Submicronic SiC-TiB2 Composites by Reactive Pressureless Sintering Optimised Si3N4 Ceramics Containing Nitrogen Woehlerite as a Grain Boundary Phase Sintering and Microstructural Evolution of Si3N4-La2O3-Y2O3 System from Different Powder Processing Methods High Temperature Stability of -SiAlONs Containing Mixed Cations Optimization and Improvement of Sialon Ceramics with New Heat Treatment Techniques Thermal Stability of Rare Earth Densified -Sialon Ceramics Densification of Mixed-Oxide Coated Silicon Nitride Powders Si3N4/SiC(N) Nanocomposites Influence of SiC(N) Nanoprecipitates on the Microstructure Microstructure of Al2O3-SiC Nanocomposites Al-AlN Composites Elaborated by Squeeze Casting Fabrication of Various Nanocomposites Starting from Hydrothermal Powder Mixtures Nano-Inclusions Associated with -SiAlON Grains in - SiAlON Materials Materials on the Basis of Finely Dispersed Si3N4 Powders Microwave-Sintering of Titania Physicomechanical and Thermophysical Properties of High-Melting Compounds - Based Ceramics Sintered at High Pressures Pressure-Assisted Sintering of High Purity Barium Titanate From the Powder to the Electro and/or Magnetic Ceramic Component: Fine Grain Size and Properties Properties of Hydrothermally Prepared Ferroelectrica Analysis of Motion of the Domain and Phase Boundaries in the Process of Polarization and Polarization Reversal in Low-Coercive CTS-Based Ferroelectric Ceramics Electromechanical Interactions and Physical Properties of Perovskite-Type Ferroelectric Ceramics Pecularities of the Domain Structure of the Perovskite-Type Ceramic Ferroelectric Materials Dielectric Anomaly of (Sr1-xBi2x/3)TiO3 Ceramic in the Temperature Range of 300-550K The Ferroelectric and Frequent Characteristics of BaTiO3-Ceramics with Additives The Fractals and BaTiO3-Ceramics Structure New Experimental Evidence of Relaxor Ferroelectrics Modified PbSc1/2Nb1/2O3 Ferroelectric Ceramics High Electromechanical Coupling in Relaxor Pb(Sc1/2Nb1/2) O3 - PbTiO3 System Hot-Pressed Piezoelectric Ceramics The Role of PbO on the Sintering Behavior and Microstructural Development of Pb(Mg1/3Nb2/3)O3 based Relaxors Dielectric Properties and Ordering Behavior of Pb(Fe2/3W1/3)O3 Ceramics with Na and La Substitutions Dielectric Dispersion and Slow Relaxation Process in Modified PbTiO3 Ferroelectric Ceramics Piezoelectricity in PbTiO3 - Based Ferroelectric Ceramics: a Review The Connection Processing - Structure - Electrical Properties in Ceramics PbTiO3 Phase State and Structure of Ferroelectric Ceramics under Irradiation Observations of Cracking in Bulk PLZT Ceramics Switching Kinetics in Thick Film and Bulk PLZT Ceramics Anelastic Behavior of Piezoelectric PZT Ceramics Effect of Poling and Poling Reversal on the Piezoelctric Properties of PZT Type Ceramics The Influence of Excess Lead Oxide on the Piezoelectric Properties of NbLi Doped PZT Type Materials Pyroelectric Detectors from RF sputtered PZT Type Materials Preparation of PLZT Materials Using Powders from Aqueous Coprecipitation Microstructure of 90 Degrees Domains in Ferroelectric Materials studied by XRD Phase Coexistence at MPB in PZT Thin Films prepared by Sol-Gel Processing SrBi2Nb2O9 Ferroelectric Thin Films prepared by Sol-Gel Spin-Coating Production of Dense Lead Zirconate Titanate (PZT) Films LiNbO3 Thin Films prepared from a Polymeric Precursor Method SAW Materials and Devices Characterization of High Resolution and Accuracy Fabrication Processes of Magnetic and Dielectric Multilayer Ceramics Grain Boundary Structures in Electronic Ceramics Valence States of MgO, AI2O3 and Metal-Oxide Interfaces Ceramic Micropackages Realised through the Technology. Specific to Electronic Components Effect of NiO on the Sintering Behaviour of BaTiO3 Dielectric Properties of NiO-Doped BaTiO3 sintered with different Oxygen Partial Pressure Evolution of Hysteresis Loops with Temperature Studied on Dielectric Ceramics Based on Tetragonal Tungsten Bronze Structure Doping Elements Influence on Microstructural and Dielectric Properties of Alpha Alumina Formation and Characteristics of some Cerium-Doped Ba(Ti,Sn)O3 Solid Solutions Dielectric Properties in Ce doped BaTiO3 Solid Solutions MW Ceramic Dielectrics Based on the System BaO-(Nd,Sm)2O3-TiO2 Polarization Mechanism of Thermostable Microwave Ceramics Effect of the Grinding Process on Different Characteristics of (Zr,Sn)TiO4 Microwave Dielectric Ceramics Dielectric Ceramics Derived from Barium-Tetratitanate Based Solid Solutions The Formation and Composition of Compounds in the Ba- Rich Region of the BaO-M2O3-TiO2 Ternary System (M=Y and Nd) The Influence of Isovalent Doping on the Microwave Dielectric Properties of Ba6-xNd8+2/3xTi18O54 Based Ceramics Introduction of Oxyanions into Copper Oxides: A Route for the Generation of New High TC Superconductors Relationship between the Microstructure and the Properties of Undoped and Pb-Doped Hg-1223 Superconductors Transport Current in Highly Textured Bulk (Bi,Pb)-2223 Ceramics The Influence of Synthesis Environment on Magnetic Properties and Phase Content in BSCCO Superconducting Ceramic Obtained by Spray-Frozen, Freeze Drying Technique The Influence of Synthesis Environment and Time on Volumetric Characteristics of BSCCO Superconducting Ceramic Obtained by Spray-Frozen, Freeze Drying Technique Glass and Glass-Ceramic Obtained in the Doped Bi-Sr-Ca-Cu-O System. Early Stage of Crystallization Calculation of Oxalate Coprecipitation Conditions for the Synthesis of Superconducting Compounds Synthesis of Hg-Based Superconductors by Hot-Isostatic Pressing New Technology to Improve Texturing and Transport Current in Bulk (2223) BSCCO Superconductors Superconductor BSCCO Thin Films Obtained by RF Sputtering Bi-Based Superconductors Obtained by Oxalate Coprecipitation, Containing Fe Synthesis and Raman Characterization of Hg1-xPbxBa2-ySryCa2Cu3Oz Superconductors Synthesis and Crystalline Structure of In2Ba4Cu6Ox Growth of NdBa2Cu3O7- Single Crystals by a Horizontal-Bridgman Like Method Microscopic Studies of YBCO-Based Polycrystalline Materials Heteropolynuclear Complex Precursors Used in M(III)M(II)2Cu3O7- Mixed Oxides Synthesis (M(III)=La, Ce, Y
• M(II)=Sr, Ba) Investigation of YBa2Cu3O7- /Y2BaCuO5 and EuBa2Cu3O7- /Eu2BaCuO5 Composites Morphology and Composition of YBaCuO Targets after Laser Ablation for the Growth of Thin Films Raman Study of Compositionally Induced Phase Transitions in Nd1+xBa2-xCu3Oz Solid Solutions Grain Resistivity and Grain Size in Non-Ohmic Oxide Ceramics A.c. Thermally Assisted Tunnel Transport in Zinc Oxide Non-Ohmic Ceramics Percolation and Conduction of Disordered Ceramic Material with Integranular Barries Densification, Microstructure and Voltage/Current Characteristics of Bi-Mn-Doped ZnO Ceramics Sintered at Low Temperature The Effect of Variations in Sintering Temperature on the Structure of Electrically Active Interfaces in Zinc Oxide Varistors Investigation of Electronic Processes at the Grain Boundaries of a Multilayer Varistor Thermodynamic and Experimental Investigation of the Effect of Rare-Earth Ions (Ln3+) Nature on the Posistor Properties of (Ba1-XLnX3+) TiO3 Electrode Influence on Transient Thermal Gradients in BaTiO3 PTC Thermistors Sintering Behavior and Electrical Properties of Pure and Doped Barium Titanate Powders Produced by Hydrothermal Synthesis Investigation of the Microscopical Origin of the PTCR Anomaly in Two Phase Zn-Ni-O Ceramics Preparation of BaTiO3 PTCR Ceramics by Low Temperature Liquid Phase Sintering Nickel Baryum Manganites: An Interesting System for NTC Thermistors The Formation of Grain Boundary Potential Barriers in Semiconducting (Sr,Ca)(Ti,Nb)O3 Ceramics Surface Characterisation of a Tin Oxide Nanosized Powder by FT-IR Spectrometry in Relation with the Semiconducting Properties Investigation of Electrical Behaviour of LaNi0.6Co0.4O3 on Perovskite NTC-Ceramics Comparison of Different Methods for Applying La-Ni-Co Oxide Films on PTCR Ceramics Thermogravimetric and Electrical Characterisation of a Tantalum Pentoxide Doped Ceria-Zirconia Solid Solution Effect of the Low Temperature Synthesis on the (La1-xSrx)MnO3+/- System Heteropolynuclear Complex Compounds as Precursors of LaCrO3 Preparation of Anode Composite Materials for Solid Oxide Fuel Cells by Using Some Alternative Nickel Precursors Structure and Properties of Acceptor Intercalated Graphite Fibres A Structural Study of Tin-Doped Indium Oxide (ITO) Ceramics Using 119Sn Moessbauer Spectroscopy and Neutron Diffraction Chemistry and Microstructure of the Interface between Lanthanum Manganite and Cubic Stabilized Zirconia Performance of Mixed Conducting Electrochemical Filters for YSZ Oxygen Sensors Properties of Composite (CaF2+SiO2) Solid Electrolytes The Preparation of CdTe Particles in Silica Glasses by a Sol-Gel Method Application of NR to Study the Lithium Ion Transfer in Solid Ionic Conductors Nonstoichiometry and Electrical Properties of the Perovskite Ca2Fe1.4Nb0.6O Barium Hexaferrite as Permanent-Magnetic Material in Microsystems Technology Synthesis of Single Crystals of Hard Ferrite in the Presence of Flux Preparation of Nd-Fe-B Magnetic Films by Ceramic Techniques Giant Magnetoresistance in La1-xCaxMnO3 Ceramics and Thin Films Deposition of Magnetoresistive La1-xCaxMnO3 Thin Films by Aerosol-Assisted MOCVD Magnetic Behaviour of Submicronic Acicular Composite Particles Microwave Behaviour in Z Type Polycristalline Hexaferrites New Ceramics for the Information Storage: Nanoparticles of Titanium Ferrites. Influence of Oxidation and Reduction Reactions upon the Coercivity Making Soft Past in the XVIII Century Ion-Beam Archaeometry of Islamic Lustre Glazes Forms and Fabrics of the Terracotta Industry in Southern Etruria in the Third and Second Centuries B.C. Characterisation of Mosaic 'Glazes' from the 'S. Giusto' Basilica (Puglia, Italy) Ceramics of Cucuteni Medieval Ceramics From Piua Petrii Archaelogical Site Re-Evaluating Late Nineteenth Century Creative Innovations in the Silicate Industry: The Zsolnay Ceramics Works of Pecs, Hungary Ceramic's Technics and Technology of Bernard Palissy Excavated Iznik Kilns and Characterization Studies of the Kiln Furniture Archaeological Ceramic Glazes Characterization by Laser Ablation - Inductively Coupled Plasma - Mass Spectrometry (LA-ICP-MS) Apport de la Cathodoluminescence a l'Etude des Transformations de Phases Cristallines dans des Ceramiques Kaolinitiques Carbonatees Etudes en Laboratoire des Ceramiques de Type Vassiliki en Crete Orientale Byzantium and the Crusaders: Ceramic Considerations Late La Tene Figurative Painted Pottery: Diffusion of a Product or a Concept? Galloroman Terra Sigillata Imitations of Western Switzerland: Technology and Provenance The Scientific Investigation of Bricks from St. Urban (13th Century Cistercian Monastery, Lucerne, Switzerland) Cathodoluminescence Analysis: A Tool for Ceramic Differentiation? X-Ray Fluorescence Analysis of French Modern Fa ences (XVI-XIX AD): First Results High-Lead Glazes Compositions and Alterations: Example of Byzantine Tiles Characterisation of the Renaissance Polychrome Italian Terracotta Sculptures of the Louvre Museum Characterization and Alterations of Hispano-Moresque Tiles of 14th Century Ceramics of the Crusader Period found in Acre: An INAA and ICP Study of the Local Productions and of Some Imports from the Byzantine World Effect of Surface Residual Stresses on Surface Crack Behaviour and Wear of Y-TZP Oxidation Behaviors of PVD TiAlN Films Properties of Electrospark Coatings on Titanium Alloy Coefficient of Friction between Yarns and Ceramic Parts for Textile Applications 'The Effect of Microstructure Modifications on the Mechanical Behaviour of Alumina Based Ceramics for Wear Applications' Composite Sol-Gel Ceramic Coatings The Wet Erosive Wear of Polycrystalline Alumina with Silicon Carbide Particulate Inclusions Factors Affecting the Wet Erosive Wear of Liquid Sintered Aluminas Sliding Wear Damage in Polycrystalline Alumina Microstructures Bioactive Coatings Based on Hydroxyapatite Influence of Silicon Surface Preparation and Orientation on Diamond Nucleation and Growth in CH4/H2 System Discharge SIMS Study of Amorphous Carbon Films Deposited on Silicon and TA6V Substrates PH Influence on the Properties of Mullite Coatings Improvement of Tribological Properties of Plasma Sprayed Ceramic Coatings Based on the Alumina Titania System Plasma Generation over Liquid Surfaces and its Application to Ceramic Synthesis - Diamond and Alumina - Influence of Substrate Preheating on the Adhesion and the Development of Residual Stresses in Plasma Sprayed Ceramic Coatings In Situ Study of Chemical Reactions during Growth of TiN Layer from Gas Phase Selection of Materials for Use at Temperatures above 1500 DegreesC in Oxidizing Atmospheres Corrosion of Ceramics in Halogen-Containing Atmospheres High Temperature Corrosion of a Porous Si2N2O-ZrO2 Composite Material Oxidation Behaviour of Yttrium and Rare-Earth Doped -Sialon Ceramics at 1350 DegreesC The Oxidation Kinetics of a Yttria-Doped Hot-Pressed Silicon Nitride Novel Approaches to Determining Oxidation Phenomena in Non-Oxide Ceramics Corrosion of Si-Based Non-Oxide Ceramics by Molten Na2SO4 Bubble Formation in the System Si-O-N Degradation of Dense Silicon Nitride in a High Temperature Combustion Environment AIN-Based Ceramics - an Alternative to Si3N4 and SiC in High-Temperature Applications? Elaboration and Caracterisation of Alumina Platelet Reinforced Molybdenum Disilicide Oxidation of New Ceramics Based on Ti3SiC2 High Oxidation Resistance of Hot Pressed Silicon Nitride Containing Yttria and Lanthania The Effect of Intergranular Phase Crystallinity on the Oxidation Rates of a Silicon Nitride A Comparison of the Oxidation Behaviour of As-Sintered and Machined Si3N4 High-Temperature Oxidation of AIN-SiC Ceramics High-Temperature Oxidation of AIN-ZrB2 Ceramics Mullite Based Oxidation Protection for SiC-C/C Composites in Air at Temperatures up to 1900 K High Temperature Corrosion between SiC and FeCrAl Alloy for Gas Burner Application Environmental Resistance of Ceramic Matrix Composite Materials for Gas Turbine Applications Oxidation Protection Coatings for C/SiC Based on Y2SiO5 Fuel Composition Effects on Burner Rig Corrosion of a Silicon Carbide Exposed at 1000 DegreesC and 1300 DegreesC Testing of Si2ON2-Ceramics Made from Microsilica and Si3N4 Powder Corrosion of MgO and MgAl2O4 by Aluminium Alloys Reactivity between Two Liquid Nickel-Base Superalloys with SiO2 Ceramics Moisture Expansion Phenomenon as a Specific Form of Brick Product Corrosion Surface Roofing Tile Scaling due to the Moisture Expansion Phenomenon Slagging Effects of Carbon Fly Ashes on Magnesite-Chrom Refractories Corrosion Effects of Glass on YSZ Electrolytes Corrosion of Zirconia Ceramics in Acidic Solutions at High Pressures and Temperatures Preparation of Multi-Layer Washcoats for Automobile Catalyst via Chemical Methods Importance of Electrostatic Interactions for the Selectivity of Micro and Mesoporous Ceramic Membranes Shaping of a RBAO-Membrane Support Fabrication and Microstructure of the Ru Doped TiO2 Composite Membranes with Fine pores Tape Casting of Diatomite for Filtration Applications Porous Reaction Bounded Alumina: Machining and Joining Properties Characterization of Multilayer Ceramic Membranes with the Atomic Force Microscope Steric Stabilization of Mixed Sol-Powder Suspensions Developing of Ceramic Membranes for Nanofiltration MgAl2O4 Spinel as Material for Ultrafiltration Membranes Centrifugal Forming of Pore-Gradient Membranes An Investigation of Microstructure and Porosity of Silicon Carbide Materials Development of Open-Pore Silicon Carbide Foams Preparation and Characterization of Microporous TiO2-Membranes Influence of Viscoelastic Characteristics of the Colloidal Suspension on the Formation of SnO2 Supported Membranes Surface Energy Components and Contact Angle of Pure and Yttria-Doped Zirconia Membranes Effect of Difffusion Processes Occuring during Active Brazing of Alumina Ceramics-FeNi42 Alloy Joints upon the Properties of the Joints The Joining of SiC3N4 Using Al and Ni Interlayers: Microstructure and Mechanics Preparation of Structured Ceramics for Membranes Microstructural Evolution of SiC/Metal Interfaces at Elevated Temperatures Al2O3-Supported Zeolite Membranes TiO2 Membrane Obtained by Sol-Gel Method Deposited on Al2O3 Supports Alternative Way of Producing Porous Silicon Nitride Ceramics for Membrane Application Mechanical Properties of Model Magnesia-Spinel Composite Materials Thermal Shock of Ceramic Material: Comparison of Resistance Parameter with the Critical T Values Tc= Tc(Bi) of Ceramic Materials Phase Transformations in the Ternary Systems HfO2(ZrO2)-y2O3-Eu2O3 Development of High Alumina Sintered Block as an Alternate to Fusion Cast Blocks for Solid Hearth of Pusher Type Reheating-Furnace Thermomechanical Bahavior of Refractory Castables under Compressive Stresses Sialon Bonded Alumina Refractories for Iron and Steel Industry Mullitization of Andalusite in Refractory Bricks Influence of Ceramic Bond on the Physico-Mechanical Properties of Carborundum Refractories Mullite Refractory Castables with Low and Ultra-Low Cement Content Microstructure Created for Highering the Thermal Shock Resistance Preparation and Properties of Spinel Rich of Magnesium and Aluminium Volume Stability of Spinel-Bonded Magnesia Castables Strength-Composition-Microstructure Relationships in Silicon Nitride Bonded Silicon Carbide Refractory Materials Alumina Refractory Masses Hardened at Normal Temperatures by Coagulation Ceramic Materials in the System ZrO2-TiO2-Al2O3 for Applications in the Ferrous and Non Ferrous Metallurgy Phase Transitions during the Dehydration Reaction of Hydrous Zirconia Fusion Cast Refractories NAZS: Influence of the Nay2O Content on Both the Phasal Composition and the Microstructure High Temperature Elasticity of MgO/C Refractories Optimisation of Raw Material Mixture Composition and Processing Variables of Blended Portland Cement Selection of Industrial Refractories for Core Catcher Application Physico-Chemical Study of Reactions between a Magnesia-Graphite Refractory and Liquid Steel Heat Treatments of Calcium Aluminate Cements: Changes in Structure and Mechanical Properties Formulation of Zircon Refractory Using Silicic Residue from a Geothermal Power Plant as Intergranular Cement Porous Interfaces as Crack Deflecting Interlayers in Ceramic Laminates C-Fibre Reinforced Composites with Polymer-Derived Matrix: Microstructure, Thermal Properties, Strength Probabilistic-Statistical Approach to the Mechanical Behavior and Failure of Ceramic Matrix Composites (CMCs) Development of Non-Oxide Ceramic Matrix Composites Based on Reactive Infiltration and In Situ Growth of AIN Bonding Phase Non-Oxide CMC Formation by Reactive Melt Infiltration The Deflection of Cracks at Interfaces SiC (Nicalon NLM 202)/SiC Microcomposites with a Highly Crystallized BN Interphase Interfacial Properties of Multilayered Interphases in SiC/SiC CVI-Composites with Weak and Strengthened Interfaces Nicalon SiC Fibre Reinforced Pre-Prepared ss-Sialon Composites Conductive SiC-Fibre Reinforced Composites as a Model of Smart Components Mechanical Stiffening of Ceramic Matrix Composites Induced by Cyclic Fatigue Assessment of the Static Fatigue Behaviour of the SiC Fibre-Reinforced Lithium Magnesium Aluminosilicate Glass-Ceramic Matrix Composite Tested under Uniaxiale Tensile Loading Microstructure and Creep of Cf-SiC Composites 2D SiCf-MLAS Tensile Creep Tests Estimation of the Bundle Bridging Stress in 2D SiC-SiC Composite Materials In-Situ Mechanical Characterisation and Interfacial Behaviour in Hi-Nicalon/BN/ -Si3N4 Ceramic Matrix Composites Applications of Continuous Fibre Reinforced Ceramic Composites in Military Turbojet Engines Mechanical Behavior of Fibrous Ceramic Matrix Composites under Constant Tensile Load. Influence of Fibre-Matrix Interface Properties Enhancement of the Oxidation Resistance of Carbon Fibres in C/C Composites via Surface Treatments Stress, Strain and Elastic Modulus Behaviour of SiC-Fiber/SiC Composites during Creep and Cyclic Fatigue Tests Mullite Long Fibres Prepared by Sol-Gel Method Using Water Solvent Systems SiC-Based Ceramic Fibres: Thermal Stability and Oxidation Behaviour Mass Spectrometric Study of Retarded Vaporization of Silicon Based Fibres: Origin of their Thermal Stability Crystallization of Polymer Derived Silicon Carbide Fibers The Properties of Fibrous Preforms Application Potential of Fiber Reinforced Ceramics Nanocomposites Si3N4/SiCN: Influence of SiC Nanoprecipitates on the Creep Behaviour Low Temperature Sintering and High Reliability PZT-Based Nanocomposite Long-Term Behaviour of SiC/Si3N4-Nanocomposites at 1400-1500 Degrees C Near Net Shape Manufacturing of Polymer Derived Ceramics Novel Polymer Derived Ceramic Hard Materials Colloidal Processing and Sintering Behaviour of Silicon Nitride Composites with Nanosized Alumina Structural Development and Properties of Si3N4-SiC Composites from Amorphous Si-C-N Powder Precursors Properties of Cordierite-Silicon Carbide Nanocomposites Fabrication and Characteristics of Alumina-Silicon Carbide Nanocomposites Microstructure Evaluation of Polymer-Derived Si-C-N-Ceramics Characterised by Scanning- and Transmission Electron Microscopy Microstructure and Mechanical Properties of Oxide Based Nanocomposites Fabricated by Spark Plasma Sintering Electrophoretic Forming of Laminated Ceramic Composite Tubes Laminar Si3N4-TiN Hot-Pressed Ceramic Composites Oxide Laminates with Tough Interfaces -Rhenanite ( -NaCaPO4) as Weak Inerface for Hydroxyapatite Ceramics Preparation and Cytocompatibility of TCP-TiO2 Biocomposites Preparation of TiO2 Bioceramics with a TCP Rich Surface Space Group Determination of Hydroxyapatite and Carbonate Apatite Composite Materials on the Base of ALN-AL2O3 with a Metallic Binder Development of Tin-Aln Ceramics and Investigations of their Physicomechanical Properties Manufacture and Properties of Al2O3-TiN Particulate Composites TiN Coating of Alumina Platelets and Mullite Fibres Using a Precipitated TiCl4.4NH3 Precursor for Incorporation into Ceramic Metal Composites The Fabrication of Sintered Reaction-Bonded Silicon Nitride with -Si3N4 Seed Crystal Fracture Behaviors of Al2O3SiC Composites Containing Various Sizes and Fraction of Fine SiC Particles ZrO2-Tix Composites Dissolution of Si3N4-Al2O3(pl) Composite Tool Materials in Carbon Steels Zirconia Matrix Composites with Chromium Carbide and Chromium Oxide Inclusions Toughening Mechanisms in the TZP - WC Particulate Composites MoSi2/Al2O3 Composites Processed by S.H.S.: Preparation Conditions and Microstructure Elaboration and Mechanical Characterisation of a Metal Matrix Composite: NiAl-SiCp and NiAl-ZrO2p Influence of ZTA Content on the Compressive Deformation in the Al2O3-ZrO2(12mol% CeO2) System Modification of Microstructure of Porous Ceramics Using CVD Method Development of Ceramic Components for Gas Turbine Application Determining Appropriate Slip Resistance Characteristics Standardization: The Case of Implantable Ceramics Critical Review of PEI Method-Wet Abrasion Test CEN/VAMAS Study of Phase Volume Fraction Measurement - A Preliminary Review of Results The New ASTM Fracture Toughness of Advanced Ceramics Standard Influence on Tiles Final Quality of Oxygen Partial Pressure on the Firing Process Optimisation of Industrial Ceramic Dryers Integration of Different Clay Parts into A Multi-Component Pottery Product Concentrates of Egyptian Nepheline Syenite Ring Complexes as a Source of Flux in Ceramic Recipes Glass Ceramics from Modified Sanovita (Timis) Basalt The Thermal Expansion, Shrinkage and Formation of Crystalline Phases in Early Dense Fired Hydromica Containing Ceramic Body Bulk Crystallized Glazes in Quaternary System Na2O-CaO-MgO-SiO2 Ceramic Pigments Obtained with Chromium as Unique Chromophore Spectral Analysis of Ceramic Glazes from Industrial Minerals The Effect of Phlogopite Mica on the Sintering Point and Colour of a Claybody Magnesium Hydrosilicate Kerolite - Potential Raw Material for Obtaining Cordierite Ceramics Particle Size Distribution - Mechanical Properties Relationship of Brick Clays Thermal Analysis and Mechanical Properties of Brick Clays Borate Raw Materials for the Ceramic Frit Industry Moisture Expansion in Ceramic Building Materials Glass and Glass-Ceramic Binders for Abrasive Grains of Fused and Sintered Alumina Type SG into Abrasive Tools The Characterization of Raw Materials Influences of a CaCo3 Sintering Additive on the Physical and Mechanical Properties of Clay-Based Ceramics Development of a 3D X Ray Cone Beam Tomograph for the Inspection of Ceramic Turbine Wheels What, How, and Why Soft and Solution Processing for Advanced Inorganic Materials An Overview of Ceramics Recycling in France Retention Capacity of the Calcium Silicates Hydrates (CSH) for Caesium Use of Spray-Dried Natural Clay in Water Filtration Structure and Crystallization Study of Iron Phosphate Glasses Chemical Corrosion Phenomena of Clay Roofing Tiles Vitrified Glass-Ceramic Product Development from Industrial Wastes Water Cleaning Effect of Silica-Alumina Sintered Spheres Glass-Ceramics with Multibarrier Structure Obtained from Industrial Waste Study of Caesium Adsorption on Hydrated Calcium-Silicate-Aluminate Systems Environmental Optimization of Green Victoria Ceramic Pigment by Sol-Gel Methods Morphology of Altered Layers of Glasses Simulation of Fluoride Emission in Traditional Ceramic Firing Processes Fluoride Emission from Clay Materials Recycled Ceramic Waste for the Electro-Insulators Jointing Mixture and for Other Building Materials Siliconcarbonitride - Materials from Modified Recycling Products Fabrication of the Hardened Bodies from Flyash The Foaming of Waste Glass Recycling of Windshield Glasses in Fired Bricks Industry Bricks by Recycling - Product Design Based on Waste Self-Propagating Reactions for Treating and Recycling Zinc Hydrometallurgical Wastes Ceramic Building Materials: An Alternative in Disposal of Sewage Sludge Sinterization of Doping Mullite with Rare Earths Using a Silica Rich Residue from a Geothermal Power Plant

「Nielsen BookData」 より

詳細情報

• NII書誌ID(NCID): BA31017409
• ISBN:
  • 0878497617
  • 0878497625
  • 0878497633
• 出版国コード: sz
• タイトル言語コード: eng
• 本文言語コード: eng
• 出版地: Zuerich
• ページ数/冊数: 3 v. (lvi, 2326 p.)
• 大きさ: 25 cm
• 親書誌ID:
  • BA1292205X