Polymer surface modification : relevance to adhesion
著者
書誌事項
Polymer surface modification : relevance to adhesion
VSP, 1996-
- [v. 1]
- v. 3
- v. 5
大学図書館所蔵 件 / 全9件
-
該当する所蔵館はありません
- すべての絞り込み条件を解除する
注記
Embodies the proceedings of the International Symposium on Polymer Surface Modification: Relevance to Adhesion, held in Las Vegas. - Previously publishd in four special issues of the Journal of Adhesion Science and Technology
Includes bibliographical references
Place of publication varies: Leiden
内容説明・目次
- 巻冊次
-
v. 5 ISBN 9789004165908
内容説明
The topic of polymer surface modification is of tremendous contemporary interest because of its critical importance in many and varied technological applications where polymers are used. Currently there is brisk research activity in unraveling the mechanisms of surface modification and finding ways to prolong the life of surface treatment. Also there is acute interest and need to devise new, improved and economical means to modify polymer surfaces.
This book is divided into three parts as follows: Part 1: Surface Modification Techniques; Part 2: Interfacial Aspects and Adhesion; Part 3: General Papers.
The topics covered include : various techniques for surface modification including plasma (both vacuum and atmospheric pressure), ozone, photografting, UV photo-oxidation, laser, use of charged particles and others for a variety of polymers; longevity of surface treatment; hydrophobic recovery; fabrication of high-density polymer nano-dots; immobilization of organometallic catalysts on textile carrier materials; polymer membrane antifouling properties; electroless metallization of polymers; effects of surface modification on interfacial shear strength of composites, cord/rubber adhesion, adhesion of UV-curable coatings and attachment of hyperbranched polymers; plasma polymerization; block copolymers; application of plasma technology in decontamination of heat-sensitive polymer surfaces.
In essence this book reflects the current state-of-the-knowledge in the arena and represents the work of many renowned scientists and technologists. It should be of interest to anyone with a desire or need to learn the latest R&D activity in this domain and the information contained here should be very valuable in deciding the optimum surface modification technique for his/her particular requirements.
目次
Surface Modification Techniques. Interfacial Aspects and Adhesion. General Papers.
- 巻冊次
-
[v. 1] ISBN 9789067642019
内容説明
This book embodies the proceedings of the International Symposium on Polymer Surface Modification: Relevance to Adhesion, held in Las Vegas. The articles in this book were previously published in four special issues of the Journal of Adhesion Science and Technology.
Polymeric materials are used for a legion of applications in a host of technological areas. However, polymers are innately hydrophobic, low surface energy materials and thus do not adhere well to other materials brought in contact. This necessitates their surface modification/treatment to render them adhesionable.
The articles in this volume cover a wide array of surface modification techniques, ranging from simple to sophisticated, wet to dry, vacuum to nonvacuum for a host of polymeric materials. The topics covered include: plasma surface treatment of a number of polymers; laser surface treatment of various polymers; corona, flame, UV, ozone, UV/ozone, photochemical, photografting, chemical grafting, and chemical methods of polymer surface modification; modification of polyamide surfaces by microorganisms; effect of polymer surface modification on metal/polymer adhesion; barrier properties of surface treated polymers; ageing study of surface treated polymers; physico-chemical properties of surface-modified polymers; application of inverse gas chromatography in the characterization of polymers; and surface acoustic wave sensor to study polymer surface treatments.
目次
- Part 1 Plasma surface modification techniques: plasma treatment of polydimethylsiloxane, M.J. Owen and P.J. Smith
- atmospheric silent discharge versus low-pressure plasma treatment of polyethylene, polypropylene, polyisobutylene and polystyrene, O.D. Greenwood et al
- hydrophobic recovery of repeatedly plasma-treated silicone rubber 1 - storage in air, E.P. Everaert et al
- the improvement in adhesion of polyurethane-polypropylene composites by short-time exposure of polypropylene to low and atmospheric pressure plasmas, J.F. Friedrich et al
- fluoropolymer surface modification for enhanced evaporated metal adhesion, M.K. Shi et al
- plasma treatment of polymers - the effect of the plasma parameters on the chemical, physical and morphological states of the polymer surface and on the metal-polymer interface, M. Collaud et al
- interfacial chemistry in A1 and Cu metallization of untreated and plasma treated polyethylene and polyethyleneterephthalate, A. Ringenbach et al
- barrier properties of plasma-modified polypropylene and polyethyeleneterephthalate, J.F. Friedrich et al
- surface biomedical effects of pl.sama on polyetherurethane, D. Li and J. Zhao. Part 2 Laser surface modification techniques: modification of polymers with UV excimer radiation from lasers and lamps, J.-Y. Zhang et al
- photolytic surface modification of polymers with UV-laser radiation, J. Breuer et al
- laser-induced adhesion enhancement of polymer composites and metal alloys, A. Buchman et al
- excimer laser-induced photochemical modification and adhesion improvement of a fluororesin surface, M. Murahara and K. Toyoda
- photochemical surface modification of polypropylene for adhesion enhancement by using exicmer laser, M. Murahara and M. Okoshi. Part 3 Other/miscellaneous surface modification techniques. (Part contents)
- 巻冊次
-
v. 3 ISBN 9789067644037
内容説明
This book documents the proceedings of the Fourth International Symposium on Polymer Surface Modification: Relevance to Adhesion held under the auspices of MST Conferences, LLC in Orlando, FL, June 9-11, 2003.
Polymers are used for a variety of purposes in a host of technological applications and even a cursory look at the literature will evince that currently there is tremendous interest and R&D activity in the area of polymer surface modification to attain their desired surface characteristics, particularly to enhance their adhesion.
This volume contains a total of 25 papers which were properly peer reviewed, revised and edited. So this book is not merely a collection of papers, rather represents the highest standard of publication. The book is divided into three parts: 1. Plasma Surface Modification Techniques; 2. Other / Miscellaneous Surface Modification Techniques; and 3. General Papers. The topics covered include: low pressure plasma surface modification of a variety of polymers using various gases; atmospheric pressure plasma treatment; improvement of stain release properties of fabrics; modification of electrostatic properties of polymers; photon-based processes for surface modification of fibers; excimer UV light treatment; excimer laser surface treatment; low-energy ion treatment; photo-grafting and photo-curing; metallization of treated polymers; chemical (wet) functionalization of polymers; adhesion of paints to thermoplastic substrates; polymer release surfaces; nanolithography in polymer films; gas barrier properties of ceramic layers on polymers; and modification of interphase layer and relevance to adhesion.
This volume and its predecessors containing plentiful information should serve as a comprehensive source of latest R&D activity in the highly technologically important arena of polymer surface modification. Anyone interested aEURO"centrally or peripherallyaEURO" in knowing or learning about the various ways to modify polymer surfaces should find this book of immense value.
「Nielsen BookData」 より