The science of engineering ceramics : proceedings of the 2nd International Symposium on the Science of Engineering Ceramics(EnCera'98), September 6-9, 1998, Osaka, Japan

著者

• International Symposium on the Science of Engineering Ceramics
• 新原, 晧一 ニイハラ, コウイチ

書誌事項

The science of engineering ceramics : proceedings of the 2nd International Symposium on the Science of Engineering Ceramics(EnCera'98), September 6-9, 1998, Osaka, Japan

ed. by K. Niihara ...[et al.]

（Key engineering materials, v. 161-163 . CSJ series-publications of the ceramic society of japan ; v. 2）

Trans Tech Publications , Ceramic Society of Japan, c1998-c1999

• 2

注記

Includes index

内容説明・目次

内容説明

Volume is indexed by Thomson Reuters CPCI-S (WoS). A total of 147 peer-reviewed papers were presented during EnCera' 98. The topics covered included: "Modeling of Microstructural Evolution", "Novel Processing", "Advanced Oxide Ceramics", "Advanced Non-oxide Ceramics", "Particulate, Platelet and Whisker Reinforced Composites", "Nanostructured Ceramics and Nanocomposites", "Synergy Ceramics", "Fracture, Deformation and Mechanical Reliability", "Advanced Refractories", and "Joining, FGM and Applications" .

目次

Fracture and Deformation Damage Accumulation in Tough Ceramics New Perspectives in Engine Applications of Engineering Ceramics Instability of Solid-Liquid Interfaces in Ceramic Materials Rheology of Grain-Boundary Sliding and Grain Interlocking at High Temperatures Study of Crystallographic Orientation of in situ -Si3N4 Composite by Electron Back Scattered Diffraction (EBSD) Method Design of Ceramic Microstructures by the Monte Carlo Simulations Sintering of Al2O3-ZrO2 Composites Using Millimeter-Wave Radiation Millimeter-Wave Sintering of Si3N4 Fabrication Process and Mechanical Properties of ZnO Based Nanocomposites by Pulse Electric Current Sintering Method In-situ Microstructural Control in Engineering Ceramics Transient Liquid Phase Sintering of Silicon Nitride by Hafnia Addition In-situ Synthesis of Si3N4/SiC Composites by Reactive Hot-Pressing from Elemental Powders Estraction Sintering - A New Route to Non-Oxide Compostie Ceramics Novel Processing Routes to Ceramic Compostes Developed in Poland New Carbide Composites with Extraordinary Properties Pressure Controlled Slip Casting of Fine Ceramics Combustion Synthesis of Gamma-Lithium Aluminate Formation of SiC-AIN Solid Solution by Combustion Nitridation of Al with SiC Microstructure and Properties of Net Shape Chromium Carbide-Copper Composites Al2O3/Al-Si Composites Formed by Reactive Penetration Engineering Ceramics from Preceramic Polymers Thermodynamics and Stability of Polymer-Dervied Materials Corrosion Stability and Mechanical Properties of Polysilazane-Derived SiCN-Ceramics Sol-Gel-Dervied Titania with Gradient Porosity Divorced Eutectic Precipitation in Isothermally Solidified Spinel-YAG Composite with Off-Eutectic Composition Phase Transformation of Transition-Alumina upon Hastened Sintering Composites Alumina - Silicon Carbide Obtained in Low Temperature by using Phosphate Glass Sealing Direct Nitridation of Aluminum Compacts at Low Temperature High Nitrogen Pressure Thermochemical Study of Adsorption Behaviour of Polyacrylic Acid on Alumina Powder Surface Grain Boundary Chemistry and Creep Resistance of Oxide Ceramics Structural Flaw Evaluation in Green Compacts and Ceramics by an Optical Method - For Understanding the Origin of Strength Variation in Ceramics - Microstructural Optimization of Alumina Prepared from Ultrafine Theta-Phase Powder for High Strength Applications A New Ceramic Eutectic Composite with High Strength at High Temperatures Fabrication and Mechanical Properties of Al2O3 Solid Solution with Low Addition of Cr2O3 Microstructure and Characteristic of Alumina with Addition of Small Amount of YAG Metastable Precipitation of YAIO3 in Isothermally Solidified YAG-Spinel Eutectic Composite with YAG-Rich Composition A Manufacturing Process of ZrO2-Ca from ZrSiO4 under a Reduction Environmental Condition Effect of Y2O3 on Sintering and Microstructure of Hydroxyapatite Fabrication and Mechanical Properties of LaNbO4 and LaNbO4/Al2O3 Composites Effect of TiO2 on the Mechanical Properties of the K2O-MgO-SiO2-CaF2 Glass-Ceramics Preparation of SiC and Si3N4 Powders by Ammono Sol-Gel Processing The Effect of Microstructure on Fracture Toughness for Silicon Nitride Ceramics The Facing Challenges of Silicon Nitride Effects of Raw Powders on Microstructure and Properties of Si3N4-Based Ceramics Microstructure Control of Silicon Nitride Ceramics Fabricated from -Powder Containing Fine -Nuclei The Relationship between Thermal Conductivity and Microstructure in Si3N4 Ceramics Thermodynamic and Microstructural Studies of Coloration and Decoloration Processes during Gas-Pressure Sintering of Silicon Nitride Ceramics The Effect of Sintering Atmosphere on the Phase Composition and Strength of Silicon Nitride Relationship between Microstructure and Mechanical Properties for Silicon Nitride Based Ceramics Fabriacted by PECS Sub-Grain Boundary Formation in Si3N4 Based Ceramics Corrosion Resistance of Silicon Nitride Ceramics Characteristic of (Dy+Sm)-Sialon Ceramics Fabriaction and Mechanical Properties of Fine-Grained Silicon Carbide Ceramics Microstructure of Silicon Carbide with Yttrium-Aluminum Garnet and Silica Influence of Particle Size and Sintering Parameters on the Resistivity of Reaction-Bonded Silicon Carbide Effect of Heat-Treatment Atmosphere on Transfer of Alumina Additive in Silicon Carbide Fabrication of Ceramics-Metal Composite by Pressure Infiltration of Metal to Porous Ceramics Effects of YAG-Phase Amount on the Microstructure and Phase Transformation during the Liquid-Phase Sintering of -SiC The Improvement in Mechanical Properties of MoSi2 through the Modification of Grain Boundary Phases Mo(Si, Al)2-Based Materials Prepared by Reactive Infiltration of Aluminum into Porous MoSi2-Mo Preforms Incorporation of ZrO2 into MoSi2 Porous Bodies by Chemical Vapour Infiltration Mechanical Properties of TiC-Coated Graphite Toughening Behavior in Ceramics and Cermets The Correlation between Crack Extension Resistance and Microstructure in a Whisker-Reinforced Ceramic Composite Oxidation Resistance of Silicon Carbide Whisker Reinforced Sialon Composites Mechanical Properties of PSZ-Matrix Ceramic Composites Containing Al2O3 Particles of Various Sizes Sintering of Alumina/Zirconia Composite Powders Prepared by the Coprecipitation Technique The Effect of Alumina Addition on Phase Transformation and Mechanical Properties in Partially Stabilized Zirconia Microstructure-Process-Property Realationship in Al/Al2O3 Composites Fabricated by Reaction between SiO2 and Molten Al Composties for Use at High Temperatures Mechanical and Tribological Properties of Hot-Pressed Si3N4-TiC Composites -Sialon-AIN-Polytypoid Composite Ceramics The Influence of Various Size of AIN Starting Powders on the Mechanical Properties and Microstructure of SiC-AIN Composites Composite Materials in the B-C-N-Ti System Formed by Reaction Coating Toughening Alumina with Metallic and Zirconia Inclusions Fabrication and Mechanical Properties of Al2O3/LaPO4 Composite Processing and Properties of Oriented SiC Whisker-Reinforced Si3N4 Ceramic Matrix Composites Mechanical Properties of in-situ Prepared SiC Whisker- and Nano Particle-Reinforced Si3N4 Mechanical Properties and Toughening Mechanisms of Si3N4 Matrix Laminated Ceramic Composite The Potential of the Hydrolysis Assisted Solidification (HAS) Process for Wet Forming of Engineering Ceramics Effects of Ceramic Particle Addition on the Thermal Contraction of Epoxy Materials at Cryogenic Temperature Characterization of Interface and Grain Boundary in Si3N4/SiC Nanocomposites SiC/Si3N4 Nanocomposites with Excellent High-Temperature Long-Term Behaviour A New Route to the Fabrication of Si3N4/SiC Nanocomposite Low Temperature Plasticity of Nanocrystalline Silicon Nitride Composite Fracture Behavior of Ceramic Based Nanocomposites Thermal Residual Micro-Stress Concentration and Strength of SiC-Alumina Nanocomposites Fabrication and Mechanical Properties of Nano-SiC-Oxide Composites Preparation and Sintering of SiC Particulate Dispersed Al2O3 Fine Powders by Spray Pyrolysis Method Mechanical Properties of Intragranular Oxide Nano-Size Precipitates Reinforced Alumina Ceramics The Preparation of Al2O3/Ni Nanocomposites by Pressureless Sintering Mechanical Properties of 3Y-ZrO2/Ni Composites Prepared by Reductive Sintering Fabrication of Dense ZrO2-Based Nano/Nano Type Composites by new Powder Preparation Method and Controlled Sintering Process The Study of Carbon Nano-Composite Materials Based on Aerogel Skeletal Fatigue-Free PZT-Based Nanocomposites Recent Progress in the Synergy Ceramics Project Computer Simulation for Estimation of Mechanical and Thermal Properties of AIN Molecular Dynamics Simulation of Alumina Interfaces in Order to Design Advanced Materials Microstructural Design of Grain Boundaries in Alumina Based Ceramics Rate Equations for Sintering and Growth with Two-Sphere Model, Theory of Grain Coalescence Interface Formation and Oxidation Behaviors of Silicon-Carbide-Based Layered Composites Multiphase Composites of Silicon Carbide Obtained from Composite Particles Seeded Silicon Nitride: Microstructure and Performance Mechanical Properties of Si3N4/BN Composites by Chemical Processing Development of New Processing Technology which Realizes in-situ Dispersion of Nano-Particles and Whiskers in Ceramic Matrix Synthesis of Nanocomposite Ceramics for Magnetic Remote Sensing and Actuating Transition Metal Dispersed Oxide Ceramic Nanocomposites with Multiple Functions The Synthesis of Nano-Sized Metal Dispersed MgO Composites and Its Magnetic Properties Structures and Magnetic Properties of Iron-Oxide/Silver Nanocomposite Preparation of Stoichiometric Crystalline Li(Nb,Ti)O3 Solid Solutions by Sol-Gel Processing with Metal Alkoxides 28GHz Microwave Sintering for High Performance PZT-Based Nanocomposites Ceramic Nanocomposites with Perovskite-Type Ferroelectric Dispersoid Effects of Impurities on Dielectric Properties and Plasma Resistance of Al2O3 Ceramics for Application of Microwave Window Study on Gelcasting Processing of High Power Rutile Capacitor Novel Microstructural Design of Alumina Based Ceramics Multi-Functional Ceramic Composites through Nanocomposite Technology Design of Ceramics with Warm Feeling Mechanical Properties of Rare-Earth Silicates / SiC Layered Composites Fracture Behavior of Dense / Porous Multilayered Silicon Nitride Atomic Interface Structure of Superplastic Ceramics Microstructures and Mechanical Properties of Anisotropic Silicon Nitride Produced by Superplastic Deformation The Role of Grain Boundary Stress in Multiphase Composed Ceramics Crack Propagation in TZP Ceramics Evaluation of Fracture Toughness Through the Modeling of Indentation Residual Stress Field and Crack Shape Twist Anle Dependence of Interfacial Fracture Toughness of (0001) Twist Boundary of Alumina Derivation of Crack Path in Particle-Dispersed Cearmic Composites by Finite Element Method Determination of Fracture Aspects in Brittle Materials Using the Directional Fracture Approach Non-Destructive Evaluation of Engineering Ceramics Tribological Characterization in Ceramic Based Composite Silicon Nitride Materials with Low Friction Coefficients Plastic Deformation in the Sliding Wear Surfaces of Alumina at Various Temperatures R-Curve Measurement Silicon Nitride Based Ceramics at Elevated Temperatures by SENB Method In-situ Observations of Crack Bridging in a Self-Reinforced Alumina Ceramic Micromechanics of Crack Bridging by Elongated Crystals in Self-Reinforced Ceramic Materials High Temperature Deformation of AIN Thermal Stability of Stacking Faults in Beta-SiC Creep and Crack Growth of Zircon and Mullite Base Materials Analysis of Porous Structure and Permeability Samples of Graphite-Containing Refractory Masses Effect of Thermal Conductivity on Thermal Stress Generated in MgO-C Bricks for BOF (Basic Oxygen Furnace) New Refractories from Ceramic Composite Concept The Oxidation, Erosion and Some Mechanical Properties of '-Sialon at High Temperature Processing and Structural Characterisation of Y2O3-ZrO2 Films Deposited Using Flame Assisted Vapour Deposition Technique Recent Progress in Ceramic Joining Relation of Internal Stress and Fracture Behavior of Symmetrically Graded Al2O3/TiC/Ni Microstructure and Fracture Strength of TiN/Al and Al Alloys Interface Verification of Creep Performance of a Ceramic Gas Turbine Blade A Critical Appraisal of the Interfacial Toughness of Ceramic Matrix Composites Using Indentation Techniques Some Characteristics of Sulphate Resisting Cement Immersed in Some Aggressive Solutions Profiled Ceramic Micropackages for Microwave Application

「Nielsen BookData」 より

詳細情報

• NII書誌ID(NCID): BA38831470
• ISBN:
  • 0878498176
• 出版国コード: sz
• タイトル言語コード: eng
• 本文言語コード: eng
• 出版地: Zuerich, Switzerland,Tokyo
• ページ数/冊数: xxii, 701 p.
• 大きさ: 26 cm
• 分類:
  • LCC : TA430
  • DC19 : 620.1/4
• 件名:
  • PRECIS : Materials: Ceramics. Engineering aspects
  • LCSH : Ceramic materials
• 親書誌ID:
  • BA1292205X