High temperature ceramic matrix composites : proceedings of the 3rd International Conference on High Temperature Ceramic Matrix Composites(HT-CMC 3), September 6-9, 1998, Osaka, Japan
著者
書誌事項
High temperature ceramic matrix composites : proceedings of the 3rd International Conference on High Temperature Ceramic Matrix Composites(HT-CMC 3), September 6-9, 1998, Osaka, Japan
(Key engineering materials, v. 164-165. CSJ series-publications of the ceramic society of japan ; v. 3)
Trans Tech Publications , Ceramic Society of Japan, c1998-c1999
- 3
大学図書館所蔵 件 / 全8件
-
該当する所蔵館はありません
- すべての絞り込み条件を解除する
注記
Includes index
内容説明・目次
内容説明
Volume is indexed by Thomson Reuters CPCI-S (WoS).
High performance materials are needed in many thermomechanical applications, such as advanced jet engines or gas turbines, thermal protection of space planes, thermal engineering and nuclear fusion. Ceramic-matrix composites, reinforced with long fibers, are expected to be the most promising candidates for such applications. However, several key problems will have to be solved in the near future. These problems include, above all, the development of a superior thermomechanical performance and oxidation resistance for ceramic fibers and composites, highly efficient protection against corrosion, better fiber/matrix interface design and performance, and cost effective processing.
目次
Processing of Ceramic Matrix Composites
Development of SiC Fiber-Reinforced SiC Composites by Radiation-Cured Preceramic Polymer
New Type of Sintered SiC Fiber and Its Composite Material
Fabrication of Carbon Fiber/SiSiC Composites and Their Mechanical Properties
Dispersion of Chopped Short Fibers in Production of Fibers-Reinforced Glass-Ceramic Matrix Composites
Sol-Gel Derived Al2O3 Fiber Dispersed with Fine YAG Particles
Chemical and Mechanical Degradation of Hi-Nicalon and Hi-Nicalon-S Fibers under CVD/CVI BN Processing Conditions
Studies of the Spinnability of Polycarbosilane and Spinning Technology of Its Continuous Fibers
SiC-Based Fibers Synthesized from Hybrid Polymer of Polycarbosilane and Polyvinylsilane
Fabrication of Cf/SiC Ceramic Matrix Composites by Polymer Precursor Pyrolysis
The Development of a Combustion Chamber Liner Utilizing a Long-Fiber Reinforced Composite Material Made Using the Poly-Silazane Impregnation Method and the Chemical Vapor Deposition Method
Development of Lanthanumhexaluminate Fiber-Coating via Sol-Gel-Route Using Inorganic and Organic Precursors
Damage Tolerant Oxide Ceramics Using Pure Fiber and Matrix Laminates
High Performance Tyranno (Si-C-M-O) Fibers for Composites
Mechanical Properties an Microstructural Characteristics of Carbon Fiber Reinforced Silicon Carbide Matrix Composites by Chemical Vapor Infiltration
An Effective Process for Silicon Carbide Matrix Composites: Dual-Composition Solution Impregnation and Pyrolysis under Medium Pressure
Sol-Gel Processing of Silicon Based Matrixes for Carbon Fiber Reinforced Ceramic Composites
Development and Properties of an Oxide Fiber-Oxide Matrix Composite
Processing and Microstructure of Polymer-Derived Oxide Composite Materials
Fabrication and Mechanical Properties of Reaction Sintered Silicon Carbide Matrix Composite
SiC Fiber Reinforced Si3N4 Ceramics with Self-Diagnosis Function
Processing and Mechanical Properties of C-Fiber Reinforced SiCN-CMCs
Processing and Characterization of Carbon Fiber Reinforced Ceramic Nanocomposites
In-situ Synthesis and Oxidation Resistance of C-SiC-TiC-TiB2 Composite
Fabrication and Characterization of 3D C/SiC Composites via Slurry and PCVI Joint Process
Processing and Characterisation of Silicon Carbide Fibre Reinforced MoSi2-Based Composites
Process and Properties of Fiber-Reinforced Ceramic Matrix Composites with Function of Fracture Detection
Micromechanical Analysis of CMC Structural Members Based on Homogenization Method
Mechanical Properties of Coating Free SiTiCO Fiber-Reinforced SiC Matrix Composites
Mechanical Properties of Carbon Fiber-Reinforced hBN Matrix Composites at Elevated Temperature
Fracture Behavior of Unidirectional Si-Ti-C-O Fiber- Bonded Ceramic Composite Materials
Mechanical Properties of C/C Composites
Geometry Determination of Cruciform-Type Specimen and Biaxial Tensile Test of C/C Composites
Modelling of the Mechanical Behavior of a 2.5D C/C Composite under Tensile and Shear Loads at Room Temperature
Damage Modelling at the Mesoscopic Scale for 4D Carbon/Carbon Composites
Formation of a CVI-SiC Matrix Coating Reinforced by Carbon Fiber on a 2-D Woven C/C Substrate
Determination of the Interlaminar Tensile Strength of a C/C-Composite by the Diametral Compression Test at Temperatures up to 1800 DegreesC
Shear Failure Behavior of Continuous Fiber Reinforced Ceramic Matrix Composites
Anomalous Strain Behaviour under Stress Controlled Loading of CFCCs
Toughened Silicon Carbide Based Composites by Microstructure Design and Processing
A Novel Technique of Using Interfacial Debonding to Measure Fiber-Bridging Stress in Ceramic Composites
Themomechanical Behavior and Microstructure of Tyrannohex Composites
Fracture Behavior of Cross-Ply Laminates Carbon-Carbon Composites
Creep Behavior and Modeling of SiC-Based PC Ceramic Matrix Composites with Glass Sealant in High Temperature Air
In situ Properties of 3-D Woven SiC/SiC-Based Composite
Probabilistic-Statistical Approach to Matrix Cracking in Ceramic Matrix Composites (CMCs)
Failure Mechanisms and the Macro-Response of Carbon Fiber Reinforced SiC Matrix Composites
Triaxially Braided C/SiC Composites: Research and Development by the Combined Process of CVI+PIP
Microstructure and Mechanical Properties of Hot-Pressed Silicon Carbide Fiber-Reinforced Silicon Carbide Composite
Tensile Matrix Cracking Behavior of Hi-Nicalon Fiber/Glass Matrix Cross-Ply Laminate Composites
Effect of the Open Porosity on the Flexural Strength of 2-D Woven Carbon Fiber Reinforced SiC/C Matrix Composites by Reaction-Bonding
The Pretreatment on Carbon Fibers for C/SiC Composites
Triaxially Braided C/SiC Composites: Structure and Properties
Triaxially Braided C/SiC Composites: A High Temperature, Lightweight, Nozzle Material
Three Dimensional Crack-Fiber Interaction Process in Fiber-Reinforced Ceramic Matrix Composite: Model Experiment
Mechanical Behavior of a Si-Ti-C-O Fiber-Bonded Ceramic Material
Static Fatigue of 2D SiC/SiC Composites with Multilayered (PyC-SiC)n Interphases at High Temperatures in Air
On the Way to the Equivalence between Measured Parameters Using Non-Notched and Notched Woven Specimens of SiC/C/SiC Composites
Design of Room Temperature Tensile Test Specimen Made of Ceramic Matrix Composites
From the Yarn to the Bulk: A Meso-Macro Approach of the Mechanical Behaviour of 2D Ceramic Matrix Composites
High Temperature Behaviours of Two Nanocomposite Oxide Fibres
Thermal Stability of Glass-Sealed Si-Ti-C-O Fiber Reinforced SiC Composite
Structure and Materials of a Multi-Layer Coating for the Oxidation Protection of C/C Composites up to 1700 DegreesC
Thermal Expansion Behaviour of High Melting Point Oxides
Characterization of Coating Cracks in Oxidation-Resistant SiC Coating on C/C Composites
High-Temperature Properties of Newly Developed Advanced SiC Fibers
Oxidation Behavior of Glass-Protected Tyranno-Hex Ceramic Matrix Composites
Effects of Matrix Cracking on the Creep of SiC-SiC Microcomposites
Tensile Creep Properties of Si-M-C-O (M=Ti or Zr) Fibers in Air Derived from Polymer Precursors
Some Recommendations for Long Term High Temperature Tests
Creep at the Mesoscopic and Microscopic Scale of 2.5D Cf-SiC
Macroscopic Creep of 2.5D Cf-SiC
Fatigue Behavior at High Temperature in Air of a 2D Woven SiC/SiBC with a Self Healing Matrix
Cyclic Fatigue Behaviour at Room Temperature and at High Temperature under Inert Atmosphere of a C/SiC Multilayer Composite
Improvement of Cyclic Fatigue Analysis by the Use of a Tensile Master Curve in Carbon/Carbon Composites
Subcritical Crack Growth Mechanisms and Failure Mechanism Maps for Ceramic Matrix Composites
Nanocreep of Carbon Fibers in 2.5D Cf-SiC
Tensile Behavior of Woven Ceramic Matrix Composites at Room and Elevated Temperature: An Experimental and Numerical Study
Thermal Cycling, Thermal Aging and Thermal Shock Behavior of Nicalon-Fiber Reinforced Glass Matrix Composites
Development of Interfaces in Oxide Matrix Composites
(PyC/SiC)n and (BN/SiC)n Nanoscale-Multilayered Interphases by Pressure Pulsed-CVI
Multilayerd Interphases in SiC/SiC Composites: Influence of the Interfacial Bond Strength on the Interfacial Characteristics
A Multilayer Ceramic Matrix for Oxidation Resistant Carbon Fibers-Reinforced CMCs
Methodology for Assessing the Interfacial Sliding Stress of a 2D Woven SiC-SiC Composite
Modeling of Interfacial Debonding in Unidirectionally Fiber-Reinforced Ceramics
Role of Roughness in Fibre/Matrix Interface Behaviour
Mullite/ZrO2 Laminate Composites for High Temperature Applications
Fiber Reinforced Porous Alumina Substrate Consisting of Layer with Distinct Grain Sizes
Oxidation Behavior of Ceramic Fibers from the Si-C-N-O System and Sub-Systems
Polyfunctional Interface Coatings for High Temperature Resistant Ceramic Composite of SiC/SiC Type
Properties of Advanced Fibers for SiC/SiC Composite Applications in Fusion Energy Systems
Designing of Textile Preforms for Ceramic Matrix Composites
Design, Fabrication and Characterization of High Temperature Joints in Ceramic Composites
Design of High Preformance CMC Brake Discs
Tailoring of Interface Mechanical Properties in Al2O3 Fiber-Reinforced Al2O3 Matrix Composite
Morphology of Ceramic Matrix Composites
Joining of Si-Ti-C-O Fiber Reinforced Ceramic Composite and Fe-Cr-Ni Stainless Steel
Development of High Temperature Materials Including CMCs for Space Application
CMC for Hot Structures and Control Surfaces of Future Launchers
Low Cost Processing for C/C-SiC Composites by Means of Liquid Silicon Infiltration
「Nielsen BookData」 より