Molten salt chemistry and technology 5 : Proceedings of the 5th International Symposium on Molten Salt Chemistry and Technology, Dresden, Germany, August 1997
著者
書誌事項
Molten salt chemistry and technology 5 : Proceedings of the 5th International Symposium on Molten Salt Chemistry and Technology, Dresden, Germany, August 1997
(Molten salt forum, v. 5-6)
Trans Tech Publications, c1998
大学図書館所蔵 件 / 全3件
-
該当する所蔵館はありません
- すべての絞り込み条件を解除する
注記
Symposium held at the 183rd Meeting of the Electrochemical Society in Honolulu, Hawaii, May 16-21, 1993
Includes bibliographical references and indexes
内容説明・目次
内容説明
This fifth conference on Molten Salt Chemistry and Technology focused mainly on applied science and questions of technological concern, but also included aspects of fundamental research. The organizers moreover were careful to organize four special sessions on less conventional issues, namely: molten carbonate fuel cells, hot corrosion, slags and glass forming melts and low temperature melts.
目次
Preface
Plenary Lectures
Molten Carbonate Fuel Cells: Research, Stack and SystemTechnology
Transport and Relaxation in Glass-Forming Molten Salts
Hot Corrosion of Materials - Fundamental Aspects
Rubbery Electrolytes
Advances and Innovations in the Extraction of Aluminum and Magnesium
Interfacial Phenomena in Ionic Fluids
Ionic Liquids for Clean Technology: An Update
Glass-Forming Melts - Current Problems in Research and Production
Microsymposium on Molten Carbonate Fuel Cells
Electrode Kinetics of Oxygen Reduction in Molten Carbonates
Transient Response Analysis of Current Interrupt and Electrochemical Impedance Spectroscopy on an 100cm2 Class Molten Carbonate Fuel Cell
Ionic Transfer of Alkali, Alkaline Earth and Some Transition Metal Cations and Electrolyte Segregation in Experimental MCFC
Incorporation of Alkali Metals into NiO by Reaction with Carbonates
Internal Cation Mobilities in the Molten Binary System (Li, Na)2CO3
Recent Research of MCFC Materials
Post-Test Physicochemical Characterization of the Main Components of External Manifolded MCFC Stacks
High Temperature Corrosion of Stainless Steels with the Presence of Molten Carbonate
Coating Material Selection for Corrosion Protection of Steel in Molten Carbonates
High Temperature Corrosion of Iron, Low and High Alloy Steels in Simulated Cathodic MCFC Environments at 650 DegreesC
The Modeling of Molten Carbonate Fuel-Cell Cathodes Using Electrochemical Potentials
Stabilizing MCFC Anodes by External Disperison Hardening of Sintered Porous Nickel
Solubility of Co2 in the Molten Li2CO3 + Na2CO3 + K2CO3 Eutectic Mixture at 973 K
Comparison of Isothermal and Non-Isothermal MCFC Models
Measuring the Electrode Kinetics of Cathodic Oxygen Reduction with Different Fast and Slow Methods in Alkali Carbonate Melts
Study of Titanium Species on Molten Li2Co3-Na2CO3 Eutectic (52-48 mol%)at 650 DegreesC under MCFC's Anodic and Cathodic Conditions
Corrosion of MCFC Separator Material under Cathode Environment - Temperature Dependence of Corrosion of Type 316L with Li-Na Carbonate
TOPIC 1: Fundamentals
A Simplified Procedure to Estimate Thermodynamic Activities in Multicomponent Oxide Melts
Structure and Dynamic Properties of Molten Silver Halide Mixtures
Bulk Viscosity and Compressibility of the Melts LaCl3+KCl
Viscosity Measurement of Several Oxide Melts with Double-Wire Torsion Pendulum Method
Physicochemical Properties of Molten Nitrate in Solid/Melt Coexisting Systems - Electrical Conductivity and Phase Transition Behaviour of Molten Nitrates
Molten Salts under the Raman Microscope
Molecular Dynamics Study of Contact Melting in the NaF/KF System
Structural Analysis of Molten Samarium Trichloride - Alkali Chloride Systems by Raman Spectroscopy and Molecular Dynamics Calculation
Computational Study of Lanthanide Halide Complexes in a Molten Salt Environment
Ionic Composition and Phenomena of Mass, Charge, Momentum and Heat Transfer in Alkali Halide Melts
Concentration Dependence of Surface Tension of Molten Binary Mixtures
Evaluation of Surface Tension of Molten Salt Mixtures
Calorimetric Investigations of Ndl3-MI Liquid Systems (M = Li, Na, K, Cs)
Vaporization of Tml3(s) and Thermochemistry of the Dimer Homocomplex (Tml3)2(g)
Thermochemistry of the Vapor and Condensed Phases of the Csl-Dyl3 System and Implications for Metal Halide Lamps
Experimental Determination and Calculation of the Phase Diagrams of the Systems Containing Na3Alf6 and/or Na3FSO4
Segregation Model of Li+ and K+ Ions in LiCl-KCl Eutectic in Electromigration Processes
Thermodynamics of Cationic Lead(II) Chloride and Bromide Complex Formation in Molten Ca(NO3)2*4.7H2O
Electrical Conductivity of the AgCl-CdCl2 Molten Mixtures
Volume Properties of the Molten System KF-KCl-KBF4-K2TiF6
Viscosity of the Molten System KF-KCl-KBF4-K2TiF6
Coupling of Thermodynamics with Phase Diagrams of the AlF3-X (X=NaF,LiF,CaF2,MgF2)Binary Systems
Viscosity of Molten Rare Earth Trichlorides
TOPIC 2: Electrochemistry of Molten Salts
The Kinetics and Mechanism of the Electrode Reactions in Aluminium Electrolysis
Electrochemical Reactions of Selenium Compounds in Basic AlCl3-NaCl Melts
Electrode Behavior of Hydrogen in Alkali Halide Melts
Thermodynamic and Kinetic Properties of the N2 Gas Electrode in a Molten LiCl-KCl-Li3N System
Investigation of Electrochemical Behavior of Lithium Oxide in KCl-LiCl Melt
Electrical Properties of Liquid Ag2Se Containing Silver Halides
TOPIC 3: Metal Electrowinning and Refining from Molten Salts
Development and Experience with Non-Consumable Anodes in Aluminium Electrowinning
Electrorefining of Aluminum Containing Fe-, Mg- and Si-Components
Aluminum Electrorefining in Molten Chlorides for the Production of Primary Quality Aluminum
Fused Salt Electrowinning of Metals in Solid State
Electrochemical Addition of Alkali Elements to Molten Metals from Salt Mixtures
Evaluation of Colloidal Alumina Bonded TiB2 Coatings for Improving the Carbon Cathode Performance in Hall-Heroult Cells
Effect of Alkali Fluorides as an Additive Agent to the Eutectic LiCl-KCl-TiCl3 Melt on Fine Titanium Deposits
Electrochemical Synthesis of Titanium Diboride Coatings from Cryolite Melts
Electrochemical Reduction of HfCl4 in Molten Salts
Using Molten Salts for the Production of Functional Coatings
Electrolytic Production of Al-Li Alloy from Molten Salts
The Study of Zirconium and Niobium Joint Electrodeposition in KCl-KF-K2ZrF6-K2NbF7 Melts
Electrowinning of Nd in Molten LiCl-KCl Bath
Calculation of Equilibrium Electrochemical Synthesis Diagrams on an Example of the Titanium-Boron System
Homogeneity of Electrolytical and Metallurgical Zirconium and Niobium Alloys
Formation of Metallic Compounds for Hydrogen Absorption Film by Molten Salts Electrolysis
Effect of the Cathodic Current Density and Temperature on the Grain Size of Electrorefined Scandium
Electrodeposition of Tantalum Boride Coatings from Oxofluoride Melts
On the Ratio of Cathode and Anode Processes during Electroreduction-Electrooxidation of Refractory Metals in Molten Salts
Purification of Zinc by Thin-Layer Electrolysis Method in Molten Electrolytes
Electrochemical Behaviour of Bismuth in Molten Salt Electrolytes in Thin Layer Cells
Novel Carbon Anode for Fluorine Cell in Industrial Scale
Thermal Modelling of an Industrial Fluorine Electrolyzer
TOPIC 4: Corrosion of Metals and Non-Metals and Meansfor Corrosion Protection in Molten Salts - HotCorrosion
The Role of Chlorides in Hot Corrosion
Corrosion Mechanisms of Steels by Salt Melts from Deposits in Waste Incinerator Plants
Electrochemical Studies of High Temperature Corrosion of Nickel Alloys in Molten Sodium Sulphate
Study of Corrosion of a Number of Metals in Nitrate Melts
The Mechanisms of Non-Oxide Ceramic Corrosion in Combustion Gases at Temperatures above the Dew Point of Salts
Determination of V2O5 Activity for Hot Corrosion Studies of Stabilized Zirconia
Study on Mechanism of Film Formation on Nickel Electrode in a Molten NH4F*2HF and Effect of Water in the Melt on Characteristics of Film
Fe-Cr-Si-Alloys with Enhanced Resistance Against High Temperature Corrosion in the Presence of Molten Sulphate/Chloride Mixtures and HCl Containing Gases
TOPIC 5: Chemical Reactions and Processes inMolten Salts and their Technology
Lithium Containing Salt Melts in Industry
Electrochemical and Spectroscopic Study on V(V)and V(IV)Sulfate Complex Formation in Pyrosulfate Melts
Transport Properties and Reactions in Molten Fertilizer Systems
Single Crystal Growth of Superconducting La2-xMxCuO4 (M=Sr, Ca, Ba) by Using Molten Salt
Understanding Molten Nitrate Chemistry - The Role of Nitride
Behaviour of Cellulose in Hydrated Melts
Dissociation of Nitride Ion in Alkali Metal Nitrate Melts
Chemistry in Molten Salts: A Suitable Route for the Preparation of Submicronic Oxide Powders
Precursors of Copper Chromite in Molten Salts
Phase Diagram of the K2S2O7-V2O5 and Rb2S2O7-V2O5 Systems
Organic Substances Oxidation in Electrolysis of Melted Catalysts
Luminescencemetry of Acid-Base and Redox Reactions of Vanadate Ions in Molten Salts Dissolved Rare Earth Ions
Surveying the Effect of Acid-Base Properties of Melts on Electroreduction and Stabilization of Various Oxidation States of Refractory Metal Complexes
The Stability of Actinide and Rare Earth Fluorides in the Melt LiF-BeF2-ZrF4
TOPIC 6: Molten Salts in Energy Conversion, Storage andtheir Energetic Use
The Importance of the Molten Salt Electrolyte for the ZEBRA Battery System
Binary Eutectics of Acetamide with Inorganic Acetates: Possible Application for Latent Heat Storage
Pyrochemical Reprocessing of Irradiated Mixed Oxide Fuel in Molten Salts
Application of Molten Salt Technology to PWR Spent Fuel Storage
Conversion of Weapon-Grade Plutonium into Nuclear Mox Fuel by Pyrochemical Methods
A Study of Solidification of a Molten Salt System around a Horizontal Pipe
High Enrichment of Uranium and Rare Earth Elements in Alkali Chloride Melts by Countercurrent Electromigration
TOPIC 7: Slags and Glass-Forming Melts -Their Chemistry and Technology
Redox Behaviour in Glass Forming Melts
Polyvalent Ions - Their Behaviour in the Glass Melt and their Influence on Glass Crystalisation
UV/VIS-Spectroscopical Investigation of the Redox-State of Liquide Metallurgy Slags
Solubility of Silver in the Molten CaO-SiO2-Al2O3-B2O3 Mixtures
The Relationship between Surface / Interfacial Phenomena and the Emulsifying Behaviour in the System Steel Alloy / Slag at 1550 DegreesC
TOPIC 8: Low Temperature Melts
Transition Metal Chemistry in Acidic Room-Temperature Chloroaluminate Molten Salts
Room Temperature Molten Salts Based on a Quaternary Ammonium Cations
Imidazolium Room Temperature Molten Salt Systems
Investigations of the Electrodeposition of Aluminium and Chromium from an Acidic Chloroaluminate Molten Salt
Electrodeposition Mechanism of Amorphous Aluminium Alloys from Chloroaluminate Melts
Ionic Liquid-Polymer Gel Composite Electrolytes
The 1HNMR Spectra of Binary Mixtures of Molten 2-Methylpyridinium Chloride and -Hydrogenbis(2-Methylpyridinium) Iodide
Walden's Rule and Room Temperature Molten Salts
Thermochromic Behavior of Cobalt (II) Chloride Complexes in Low Melting Binary Mixtures
「Nielsen BookData」 より