Towards innovation in superplasticity II : proceedings of the 2nd International Conference "Towards Innovation in Superplasticity", held in Kobe City, Japan, September 1998

著者

• Sakuma, T.
• Aizawa, T.
• Higashi, K.

書誌事項

Towards innovation in superplasticity II : proceedings of the 2nd International Conference "Towards Innovation in Superplasticity", held in Kobe City, Japan, September 1998

editors, T. Sakuma, T. Aizawa, K. Higashi

（Materials science forum, v. 304-306）

Trans Tech Publications, c1999

タイトル別名

JIMIS-9

注記

Includes bibliographical refernces and indexes

内容説明・目次

内容説明

Volume is indexed by Thomson Reuters CPCI-S (WoS). The papers of this second conference summarize the progress made in three major target areas; (1) to identify new phenomena in superplasticity, (2) to extend superplasticity research into the atomistic level of grain boundary analysis and (3) to find ways of enhancing collaboration between scientists and industrial engineers.

目次

Towards Innovation in Superplasticity, A Brief Review on the Project An Examination of Flow Processes in High Strain Rate Superplasticity Nature of Superplastic Deformation Analysis of Tensile Superplasticity in Nanomaterials Enhanced Superplasticity of Ultrafine-Grained Alloys Processed by Severe Plastic Deformation Nano-Grain Formation in a Fully Ferritic SUS 316L Austenitic Stainless Steel Produced by HS-PM Process Superplasticity of ( + ) Duplex Stainless Steel with Elongated Secondary Phase Microstructural Evolution for Superplasticity Using Equal-Channel Angular Pressing Superplastic Behavior of Magnesium Alloy Processed by ECAE Low Temperature Superplasticity of Ultra-Fine Grained 5083 Aluminium Alloy Produced by Accumulative Roll-Bonding Formation of Microcrystalline Structures and Superplastic Properties of Nickel Based Alloys Superplastic Properties of Rapidly Solidified Mg-Al-Zn Alloys Superplasticity of Ultrafine-Grained Aluminium Alloys Processed by Equal-Channel Angular Pressing Optimization of Microstrucutre for Superplasticity Using Equal-Channel Angular Pressing Effect of Cold Pre-Rolling on Superplasticity of Nonrecrystallized 7075 Aluminium Alloy Microstructure and Superplastic Properties in an ECAE Al-4Mg-0.5Sc Alloy Processed at Elevated Temperatures Grain Refining during Heavy Deformation in Fe-C Alloys with ( + ) Two-Phase Structure Superplasticity of Sintered Titanium Alloy with Martensitic Structure Microstructure Change during Superplastic Deformation in ( + ) Duplex Stainless Steel Microstructure Control for Superplasticity of an Ultra-High Carbon Steel Atom-Scale Characterization of Ordered Alloys with Atom-Probe Field-Ion Microscope Superplastic Deformation Mechanisms of Monolithic Intermetallics Microstructural Evolution during Superplastic Deformation in Large-Grained Iron Aluminides High-Temperature Deformation in Ti-62.5at.%Al Single Crystals Containing Small Al2Ti-Type Precipitates Recent Advances in Superplastic Intermetallics with Emphasis on Titanium and Iron Aluminides Modelling Heterogeneous Microstructures, Inhomogeneous Deformation and Failure in Superplasticity Superplasticity Assisted by Stress-Induced Phase Transformation in Ti-5.5Al-1Fe Alloy Superplastic Deformation without Relative Grain Translation? Low-Temperature Superplasticity of Submicrocrystalline Intermetallics Superplasticity in Titanium Aluminides Containing Chromium Now and Future in High-Strain-Rate Superplasticity Theoretical Investigation of High Strain Rate Superplasticity Recent Research and Development Activities on Superplasticity in Taiwan Deformation and Microstructural Development in a 2124Al/SiCpMMC during High Strain Rate Superplasticity Threshold Stress in High Strain Rate Superplasticity of Powder Metallurgy Aluminum Alloys and Composites Temperature Dependence of Tensile Elongation in a Mechanically Milled, P/M Al-Mg-Cu Alloy Effect of Deformation Temperature on High Strain Rate Superplastic Properties in PM 2024Al-Fe-Ni Alloys Phenomenology and Application of Low Temperature and High Strain Rate Superplasticity in Aluminium Alloy 1420 Superplastic Deformation of Aluminum Systems at 500-650 DegreesC with or without Presence of Liquid Phase Role of Subgrain Formation in High Strain Rate Superplasticity of Al-Mg Alloy High Strain Rate Superplasticity in Magnesium Matrix Composites Containing 15-20 vol. % AIN Particulate High Strain Rate Superplasticity in 10vol.% SiC Particulate Reinforced AZ31 Magnesium Alloys The Thickness of Liquid Phase during Superplastic Deformation in the Vicinity of Solidus Temperature for a 7475 Aluminum Alloy Observation of High-Strain-Rate Superplasticity in ZK60 and SiCp/ZK60 Composite Low Temperature Superplastic Behavior in ZK60 Magnesium Alloy High Strain Superplastic Forming of a New Al-Mg Alloy Superplasticity of Ceramic Particulate Reinforced Magnesium Alloy Composite Made by a Vortex Method Superplasticity of a SiCp/Al-10wt% Ti Composite at High Strain Rates High Strain Rate Superplasticity of a Powder Metallurgy Pure Aluminum 1N90 Microstructural Dynamics during High-Strain-Rate Superplastic Flow in PM 7475 Alloy Rheological Behavior of Superplastic Nanocrystalline and Amorphous Materials Superplasticity in Pd40Ni40P20 Metallic Glass Low-Temperature Homogeneous Deformation in Amorphous Alloys Induced under Electropulsing Superplastic Behavior and Microstructure in Amorphous La55Al25Ni20 Alloy Ni Tracer Diffusion in Bulk Metallic Glass Zr55Al10Cu25 Superplastic Forming of Zr65Al10Ni10Cu15 Metallic Glass Superplasticity in La55Al20Ni25 Metallic Glass The Role of Interfaces in the High Temperature Deformation and Failure of Polycrystalline Alumina Stress Relaxation and Brittle-Ductile Transition in Superplastic Ceramics Invesigation of Superplasticity in 3Y-TZP by Stress Relaxation Mechanics of Superplastic Deformations at Atomic Scale Grain Boundary Engineering for Superplasticity Cavity Damage Accumulation in Alumina Doped with Zirconia or Magnesia An Amorphous Ceramic Fiber with Large Viscous Flow Deformation at 1193 K Superplastic Deformation of Cubic Zirconia Ceramics with Intergranular Phases High Strain Rate Superplasticity in Ceramics Alumina Segregation at Grain Boundaries in Superplastic Y-TZP Liquid Phase Sintering of Y-TZP with CuO and Y2Cu2O5 Dopants Effect of Divalent Elements on the Grain Growth of TZP Improvement of Mechanical Properties after Superplastic Deformation of Silicon Nitride Superplastic Characteristics of TZP Containing Various Amounts of SiO2 Superplastic Tensile Ductility in a Zirconia-Dispersed Alumina Produced by Colloidal Processing High Temperature Compressive Deformation Behavior of Superplastic B, C-SiC High Temperature Deformation of Precursor Derived Si-C-N Ceramics Tensile Ductility of Liquid-Phase Sintered -Silicon Carbide at Elevated Temperature High Temperature Deformation of Mullite-Zirconia Ceramics Consolidated from Rapidly Solidified Powder Effect of Boron and Carbon Addition on High Temperature Deformation Behavior of -Silicon Carbide TEM In-Situ Observation of SiO2 Doped TZP at High Temperatures Superplasticity in Zirconia and Yttria Stabilized Zirconia Mixed Powders Superplasticity in Multi-Phase Alumina-Based Composites Superplastictiy in GeO2-Doped TZP The Influence of the Threshold Stress in the Superplastic Flow of YSZP Direct Atomistic Observation of Grain Boundary Sliding I. Gold Direct Atomistic Observation of Grain Boundary Sliding II. Silicon Including Boundary Glass Phase Boundary Structure of Y-ZrO2 Grains as Derived from High-Resolution Electron Microscopy Grain Boundary Geometry of Superplastic Silicon Carbide Ceramic Grain Boundary Character Distribution Control of Al-Mg Alloys by Hot Extrusion Effect of Magnetic Field on Sintering of Iron Powder Compact Effect of Grain Boundary Microstructure on Superplastic Deformation of Al-Li-Cu-Mg-Zr Alloy Atomic Structure and Electron Structure of Fine Grained Diamond Boundaries Grain Boundary Energy and Atomic Structure in Alumina Bicrystals Initiation and Early Stages of Cavity Growth during Superplastic and Hot Deformation Modelling of Superplastic Forming Using the Finite Element Method Superplastic Forging Analysis by the Multi-Level Modeling Multiaxial Experiments and Constitutive Modeling of Superplasticity Microstructure Evolution in 5083 Al-Mg Alloy Exhibiting Low Temperature Superplasticity at 250 DegreesC The Role of Liquid Phase in Cavitation and Fracture in High-Strain-Rate Superplastic Si3N4p/Al Alloy Composite Mechanism of Internal Stress Superplasticity Based on Thermally-Activated Kinetics Finite Element Method Simulation of Grain Boundary Sliding: Its Purposes, Models and Applications in Fine-Grain Superplasticity Crack-Like Cavitaton in a 0.3 wt% SiO2-Doped Tetragonal Zirconia Anisotropic Feature of Fracture Toughness in Superplastically Deformed 3Y-TZP Effect of Deformation Schedule on Cavitation in Superplastic 7475 Al Alloy A Comparative Study of Cavitation Characteristics in Si3N4w/Al-Mg-Si Composite Effect of Grain Boundary Microstructures of Brittle Fracture in Polycrystalline Molybdenum Simple Evaluation of Superplastic Characteristic by Tensile Test Using R-Type Specimen Cavitation in Coarse-Grained Al-4.5Mg Alloys Exhibiting Superplastic-Like Behavior Positron Annihilation Study of the Cavitation in 5083 Superplastic Aluminum Alloy A Technique to Study the Granular Flow during Superplastic Deformation Forming of Ceramics at Elevated Temperatures Superplasticity of YTZP: Application to the Joining of Ceramics An Analytical Model of the Superplastic Bulge Forming of Sheet Metal Different Friction Coefficients at Different Positions of Superplastically Formed Parts On Superplastic Forming of Pure Titanium for Constructing Dental Implants Superplastic Forming of Corrosion Resistant CuZnSn Alloys Influence of Preforming on the Final Thickness Distribution of the Superplastically Deformed Domes Mathematical Modeling of Superplastic Forming of a Long Rectangular Box Section Fabrication of High-Performance Aluminum Components Using High Strain Rate Superplasticity The Numerical Analysis on Superplastic Forming under Plane Strain for 7475 Al-Alloy Superplastic Aluminum Forming - Expanding Its Techno-Economic Niche Development of Superplastic-Aluminum-Alloy Piston Formed with Controlled Forging Technology Superplastic Forming Manufacturing Technology Moves Towards the Twenty-First Century Influence of Lubrication on Aluminum Superplastic Forming Products Development of Superplastic 5083 Alloy 'ALNOVI-1' New Type Aluminum Alloys with Higher Strength Superplastic Forming of Aerospace Metallic Materials High-Strain-Rate Superplasticity of Al-Si Alloy Produced by Powder Metallurgical Processing

「Nielsen BookData」 より

詳細情報

• NII書誌ID(NCID): BA40868837
• ISBN:
  • 0878498281
• 出版国コード: sz
• タイトル言語コード: eng
• 本文言語コード: eng
• 出版地: Tuerich, Switzerland
• ページ数/冊数: xvi, 854 p.
• 大きさ: 25 cm
• 親書誌ID:
  • BA00294222