High nitrogen steels '98 : proceedings of the 5th International Conference on High Nitrogen Steels, held in Espoo, Finland, May 24-26, and Stockholm, Sweden, May 27-28, 1998
著者
書誌事項
High nitrogen steels '98 : proceedings of the 5th International Conference on High Nitrogen Steels, held in Espoo, Finland, May 24-26, and Stockholm, Sweden, May 27-28, 1998
（Materials science forum, v. 318-320）
Trans Tech Publications, c1999
大学図書館所蔵 件 / 全3件
-
該当する所蔵館はありません
- すべての絞り込み条件を解除する
内容説明・目次
内容説明
Volume is indexed by Thomson Reuters CPCI-S (WoS).
High-nitrogen steels (HNS) are finding increased application in energy production, transportation, pulp and paper, oil and gas and chemical process industries, due to their outstanding mechanical properties as well as their corrosion/oxidation and wear resistance. The aim of this conference was to bring together experts from end-users (engineering and manufacturing companies), and participants from steel producers and research organizations, in order to exchange experience, scientific data and technical information regarding high-nitrogen steels.
目次
- Atomic Scale Mechanisms of Strengthening of Nitrogen Steels Atomic Interaction and Distribution of Nitrogen and Carbon Atoms in Binary Fe-N and Fe-C Alloys Nitrogen Effect on Lattice Dynamics of FCC Fe-Cr-Mn (Ni) Austenitic Alloys Theoretical and Experimental Investigation of the Thermodynamic and Kinetic Nitrogen Absorption by Liquid Alloys The Neutron-Spectroscopy Proof of the Strong Cr-N Interactions in Nitrogen Stainless Steels Effect of Nitrogen Alloying on Elastic Coefficents of Austenitic Stainless Steel Distribution of Interstitial Impurities and their Diffusion Parameters in High-Nitrogen Steels Studied by Means of Internal Friction Influence of the Flux Composition and State of the Gas Atmosphere over the Kinetics of Nitrogen Absorption by Steels and Alloys at the Arc Slag Remelting Phase Transformations in Iron-Nitrogen Martensites
- Role of Elastic Strain Energies Precipitates in Tempered Stainless Martensitic Steels Alloyed with Nitrogen, Carbon or Both Solubility of Nitrogen in Liquid Iron-Carbon Alloys Modification of the Stainless Steel Database for High Manganese, Chromium and Nitrogen Contents Nitriding of Steel Powder-Thermodynamic Calculations and Experiments Tempering of Iron-Carbon-Nitrogen Martensites: (Re) Distribution of Interstitial Atoms Precipitation Sequences in Austenitic Fe-22Cr-21Ni-6Mo-(N) Stainless Steels Modeling Thermodynamics of Fe-N Phases: Characterisation of E-Fe2N1-z Thermodynamic Calculation of Stacking Fault Energy and its Effect on Fcc Hcp Phase Transformation in Nitrogen Alloyed Stainless Steels Equilibrium Constant and Nitrogen Activity and the Parameters of Interaction eN(N), rN(N, Mn) in High Nitrogen Steels of Fe-Cr-Mn-N Type Effect of Nitrogen on the Response of Martensitic Stainless Steels to Rapid Heat Cycles Precipitation in a High Nitrogen Superaustenitic Stainless Steel Current and Future Applications of High Nitrogen Steels High Nitrogen Martensitic Steel for Critical Components in Aviation P 2000 - a New Austenitic High Nitrogen Steel for Power Generating Equipment New Industrial Applications of HNS Applications of Nitrogen-Alloyed Stainless Steels Development of Commercial Nitrogen-Rich Stainless Steels Investigation of Microstructure and Properties of a Chromium-Rich Austenitic Material with High Nitrogen Content Effect of Structural Factors on the Mechanical Properties of High Nitrogen Austenitic Steels Principles of Alloy Design in High Nitrogen 12 % Chromium Steels Development of High Nitrogen Steels at Boehler Edelstahl GmbH Kapfenberg Solid State Alloying by Plasma Nitriding and Diffusion Annealing Treatment for Austenitic Stainless Steel Properties of Cold Worked High Nitrogen Chromium-Based Alloys Alloy Design for Suppressing Eutectoid Reaction in High Nitrogen Austenitic Steels Chromium-Manganese Stainless Steels with Nitrogen Content up to 2.10 wt% Melting of High Nitrogen Steels The Influence of Niobium and Vanadium on the Microstructure and Mechanical Properties of a High Nitrogen Stainless Steel Influence of the Counter-Pressure Casting on the Macrostructure of High Nitrogen Steel Industrial Blocks Nitrogen Recovery from Mn Nitrides in Steel Melts Gas Porosity Defects in Duplex Stainless Steel Castings The Effect of Nitrogen Alloying on Stellite 21 Cobalt Chromium Molybdenum Biomedical Implant Alloy: Processing and Microstructure Interaction of Nitrogen with Dislocations Studied by Means of Amplitude-Dependent Internal Friction Small-Angle Neutron Scattering in Austenitic Fe-18Cr-10Mn-16Ni-0.5N and Fe-21Cr-10Mn-17Ni-0.5C Steels Moessbauer Effect and Neutron Scattering in Austenitic High Nitrogen Steel Fe-19Cr-19Mn-0.9N Strengthening of Nitrogen-Containing Maraging Steels Moessbauer Surface Analysis of Nitrogen Ion Implanted Austenitic and Ferritic Steels Simulation of the Crystallization and Structure of Ferro Alloys Containing Nitrogen Theoretical and Technological Principles of Controlling Properties in Nitrogen-Containing Structural Steels The Problems of High-Nitrogen Steels Production HNS Steelmaking Process Using Thermal Plasma in a Ceramic Crucible Investigation of the Non-Metallic Inclusions in a High Nitrogen Steel Block Cast by Counter-Pressure Refining of High Nitrogen Steels in a Closed Pressure Vessel The Gas Blow-Holes Forming in Nitrogen Iron Alloys and Steels during their Crystallization Nitrogen Control in AOD Converter High-Strength Single Crystals of Austenitic Stainless Steels with Nitrogen Content: Mechanisms of Deformation and Fracture Anisotropy of Fracture Toughness of Austenitic High Nitrogen Chromium-Manganese Steel Dynamic Strain Aging of Austenitic High Nitrogen Cr-Ni and Cr-Mn Steels Mechanical Behaviour of Aged and not Prestrained High Nitrogen Austenitic Stainless Steels Effect of Cold Working and Aging on High Temperature Deformation of High Mn Stainless Steel The Effect of Nitrogen on the Mechanical Behaviour of Cold-Worked Austenitic Stainless Steel Rod Nitrogen Alloyed 9-12% Chromium Steels with a Mertensitic-Austenitic Microstructure Martensitic High Nitrogen Steel for Applications at Elevated Temperature Low Cycle Fatigue of High Nitrogen Austenitic Stainless Steel Single Crystals Grain Boundary Strengthening in Austenitic Nitrogen Steels Study of Solid Solution Hardening Nature of Austenitic Steels with Various Nitrogen Content Investigation of Physical-Mechanical Properties and Structural Stability of the Nitrogen-Free and Nitrogen-Containing Austenitic Alloys of Fe-Cr-Mn System at Cryogenic Temperatures Corrosion Properties of HNS The Influence of Nitrogen Alloying on the Pitting and Crevice Corrosion of Austenitic and Duplex Stainless Steels Influence of Metallurgical and Chemical Variables on the Pitting Corrosion Behaviour of Nitrogen-Bearing Austenitic Stainless Steels On the Crevice Corrosion Behaviour of Nitrogen Bearing Austenitic Stainless Steels The Influence of Tungsten (W) on Properties in High Nitrogen Stainless Steels Corrosion Behaviour of Solution Nitrided Stainless Steels Influence of Hydrogen on Material Behaviour of High Nitrogen Austenitic Stainless Steel Pitting and Intergranular Corrosion Resistances of Nitrogen Ion Implanted Type 304 Stainless Steel Long Term Strength of High Nitrogen Steels in Water and Chloride Solutions Stress Corrosion Cracking Susceptibility of Nitrogen Alloyed Stainless Steels in 50% CaCl2 Solution Effect of Nitrogen Ion Implantation on the Corrosion Resistance of Titanium Modified Type 316L Stainless Steel in Comparison with Argon and Oxygen Ion Implantation Improvements in Localized Corrosion Resistance of Nitrogen Ion Implanted Type 316L Stainless Steel Orthopaedic Implant Devices Nitrogen Bearing Austenitic Stainless Steels for Surgical Implants An Experimental and Theoretical Study of Nitrogen Flux in Stainless Steel TIG Welds Recent Developments on the Weldability of a New High Nitrogen Stainless Steel Welding of High Nitrogen Superaustenitic and Superduplex Stainless Steels The Role of Nitrogen in Improving Pitting Corrosion Resistance of High-Alloy Austenitic and Duplex Stainless Steel Welds Comparison of Welding Behaviour of SUS316L Steel by Gas Tungsten and Gas Metal Arc Processes in High Pressure Nitrogen Atmosphere The Effect of Hydrogen and Cooling Rate on the Mechanical and Corrosion Properties of SAF 2507 Duplex Stainless Steel Welds Mechanical Characteristics of High Nitrogen Contained Weld Metal Based on 316L Stainless Steel Powder Metallurgically Produced High Nitrogen Steels High Nitrogen Corrosion Resistant Austenitic Stainless Steels Produced by HIP P/M Processing Powder Metallurgy High Nitrogen Stainless Steel Nitrogen Alloying of Steel Powder Using Ammonia Gas in the Fluidised Bed Nickel-Free High Nitrogen Austenitic Stainless Steels Produced by Metal Injection Moulding Effect of Nitrogen Content on Precipitation during Isothermal Annealing of P/M High Nitrogen Austenitic Stainless Steels Mechanical Properties and Corrosion Resistance of PM High Nitrogen Stainless Steel Consolidated by Hot Extrusion Amorphization and Nanoscale Refinement of High Nitrogen Containing Fe-Based Crystalline Materials by Mechanical Alloying Nitrogen Addition to bcc-Fe by Attrition Milling Hot-Press Compaction of High Nitrogen Containing Austenitic Stainless Steel Powders Mechanically Alloyed Preparation of High Nitrogen Cr-Ni and Cr-Mn Stainless Steel Powders by Mechanical Alloying and their Compositional Dependence of Austenitizing Moessbauer and Small-Angle Neutron Scattering Study of Fe-Powder Mechanically Alloyed in Nitrogen and Argon Gas Environment Metallurgy of Nitrogen Absorption Process in High Cr Steels Micromechanisms of Fatigue in High Nitrogen Duplex Steels Wear Properties of HNS Microstructural Stability and Mechanical Properties of a High Nitrogen Super Duplex Stainless Steel Characterization of Fe-C/N Steel Shape Memory Training and Properties of Fe-Mn-Based High Nitrogen Steels Nitrogen Content and Orientation and Their Relation to Slip Activity, Twinning and Crack Formation during Cold Rolling of Austenitic Single Crystals The Hot Workability of CromaniteTM, a High Nitrogen Austenitic Stainless Steel Recrystallisation in High Nitrogen Alloyed Super Duplex Stainless Steel Diagrams of Dynamic Recrystallization of Austenitic Stainless Steels with Nitrogen Effect of Structure - Texture Evolution on Cold Work Hardening Caused by Rolling of Nitrogen Cr-Ni-Mn Austenitic Steels A Comparatie Study of the Mechanical, Magnetic and Microstructural Characteristics of Modified SAF 2205 and 2507 Type Duplex Austenitic-Ferritic Stainless Steel Low Cycle Fatigue of High Nitrogen Duplex Stainless Steels Structural Evolution of a 2205 Duplex Stainless Steel between 500 DegreesC and 800 DegreesC and Pitting Corrosion Resistance Magnetic Domain Imaging and Mechanical/Magnetic Property Characterisation of a 2507 Type Duplex Austenitic-Ferritic Stainless Steel Quantative Assessment of Intermetallic Phase Precipitation in a Super Duplex Stainless Steel Weld Metal Using Automatic Image Analysis Structure and Properties of Chromium Nickel Dual Phase Nitrogen Steel after Solidification, Plastic Working and Heat Treatment
「Nielsen BookData」 より
