High temperature corrosion and protection of materials volume 5 : proceedings of the 5th International Symposium on High Temperature Corrosion and Protection of Materials Actes du 5è Colloque International sur la Corrosion et la Protection des Materiaux à haute Temperature, Les Embiez, France, May-mai 22-26 2000
著者
書誌事項
High temperature corrosion and protection of materials volume 5 : proceedings of the 5th International Symposium on High Temperature Corrosion and Protection of Materials = Actes du 5è Colloque International sur la Corrosion et la Protection des Materiaux à haute Temperature, Les Embiez, France, May-mai 22-26 2000
（Materials science forum, v. 369-372）
Trans Tech Publications, c2001
- : set
- pt. 1
- pt. 2
大学図書館所蔵 件 / 全2件
-
該当する所蔵館はありません
- すべての絞り込み条件を解除する
注記
"...under the auspices of the European Federation of Corrosion, Event no 238"
内容説明・目次
内容説明
Volume is indexed by Thomson Reuters CPCI-S (WoS).
The degradation of materials and coatings in aggressive environments continues to be of great relevance to a wide range of industrial applications. The topic is of vital economic concern to the transportation, energy generation, and chemical processing industries in the developing, as well as the developed, nations of the world. The dual thrusts of conservation of resources and protection of the environment here strongly influence the tone of the technical submissions and thus again reflect the world-wide concern.
目次
The Future for High Temperature Materials and Coatings in the New Millennium
Impurity Segregation to Scale/Alloy Interfaces and its Effect on Interfacial Properties
High-Temperature Oxidation Kinetics of Non-Oxide Monolithic and Particulate Composite Ceramics
Carbon-Induced Corrosion of Metals and Alloys
Practical Aspects of the Reactive Element Effect
Kinetic and Morphological Development of Internal Precipitates in Iron-Chromium Alloys
Mechanisms and Prevention of Corrosion in Carbonaceous Gases
Thin Film Hot Corrosion Studies of Oxidised and Carburised 304 Stainless Steel
Air Oxidation of a Cu-30Ni-25Fe Alloy at 700-900 DegreesC
Initial Oxidation Stages of Nickel
The Surface Kinetics of the Initial Oxidation Stages of Copper as Investigated by In Situ Ultra-High Vacuum Transmission Electron Microscopy
Microstructure Evolution of Alloy 600 during Dry Oxidation
Study of the Influence of an Applied Stress on the Oxidation at 550 DegreesC of Ni (100) and Ni (111) Single Crystals
High Temperature Air Oxidation of Co-Ta Alloys
Influence of Composition and Phase Distribution on the Oxidation Behaviour of NiCoCrAIY Alloys
Evidence for Suppression of the Oxidation of a Fe 2.25Cr 1 Mo Steel by Traces of SO2
Short-Term High Temperature Oxidation of Lamellar Cast Iron
Evolution of Scale Microstructure as a Function of Scale Oxide Thickness during Oxidation of Nickel at 700 DegreesC
High-Temperature Corrosion of Cast Irons and Cast Steels in Dry Air
Microstructure of Oxidised 304L Steel and the Effects of Surface Roughness on Oxidation Behaviour
Influence of Additives on Characterisation and High Temperature Corrosion of Electrodeposited Copper and Nickel
Kinetic Study of the Oxidation by Water Vapour of a Zirconium-Based Alloy: Recrystallised Zircaloy-4
The Kinetic Behaviour of Metals in Water Vapour at High Temperatures: Can General Rules Be Proposed?
High Temperature Corrosion Behaviour of some Boiler Steels in Pure Water Vapour
Thermal Oxidation of a Soft Magnetic Alloy Co - 10Fe - 5Cu
Corrosion of Zirconium Alloys: Link between the Metal/Oxide Interface Roughness, the Degradation of the Protective Oxide Layer and the Corrosion Kinetics
Corrosion Mechanism at the Gas-Solid-Liquid Triple Line for Aluminium Droplets on Alumina Substrates under Vacuum
Long Term Oxidation of Fecral ODS Alloys at High Temperature
The Influence of Water Vapor on the Corrosion of Chromia-Forming Steels
Microstructural Changes in the Sub-Surface Area of Ni-Base Superalloys as a Consequence of Oxide Scale Failure
Oxidation Behaviour of -FeAlCr Coating Produced by Close-Field Unbalanced Magnetron Sputter Deposition
TEM Observation of Phase Transformations of Alumina Scales Formed on Al-Deposited Fe-Cr-Al Foils
The Effect of Yttrium on the Oxidation of a Commercial Fe-Cr-Al Alloy at 1173 K
Surface Treatment and Cold Working as Tools to Improve Oxidation Behaviour of Chromium Steels
Mechanisms Involved by Reactive Elements upon High Temperature Chromia Scale Growth
Oxide Defects and Damage Processes in Iron-Based Alumina-Formers
Comparison of the Cyclic-Oxidation Behavior between AISI 304 and Low-Nickel Austenitic Stainless Steels
Abnormal Oxidation of Stabilized Ferritic Stainless Steels in Water Vapor
Isothermal Oxidation of -NiAl Alloys and Sputtered Coating at 1000 DegreesC in Air
Transport Phenomena in the Scale Formed on Cr in SO2 at 3x104 Pa and 105 Pa
Formation and Mechanism of Carbon-Containing Oxide Scales by Oxidation of Carbides (ZrC, HfC, TiC)
Effects of High Water Vapor Pressures on Oxidation of SiC-Based Fiber-Reinforced Composites
Effect of Ion Implantation of High Melting Point Elements on the Oxidation Behavior of TiAl
A Phenomenological Model for High Temperature Oxidation of Si3N4-TiN Composites
Optimizing the Imperfect Oxidation Performance of Iron Aluminides
The Influence of Water Vapor on the Oxidation of MoSi2 AT 450 DegreesC
Creep and Oxidation Behaviour of a TiN-TiB2 Composite Material
Influence of the Oxidation Conditions of the Fibres on the Mechanical Properties of Al Matrix Composites Reinforced with Ni-Based Fibres
The Effectiveness of Hard Coatings in Protecting Steels against Erosion-Corrosion in Oxidizing Environments at High Temperature
Mechanical Stresses: Inhibitor of Catalyst of High Temperature Oxidation?
Optimizing Scale Adhesion on Single Crystal Superalloys
Coupling between Oxidation and Mechanical Stresses. Application to the Oxidation of Ni-20Cr Foils
High-Temperature Erosion-Corrosion of Superheater Materials and Coatings in Chlorine-Containing Environments
Reactive Element (Y,Ce) Effect on Stresses Determined In-Situ during Iron Oxidation at 800 DegreesC
Cracking and Spallation of Chromia and Alumina Scales during Thermal Cycling
A Microscopy Study of Spalling and Growth Mechanism of the Oxide Scale Formed on Pd Modified Nickel Aluminum
Erosion Corrosion of Thermally Sprayed Fe12Cr and Cr3C2-NiCr Coatings
Erosion-Corrosion of 304 Tubes in Bubbling Fluidised Beds at 550 DegreesC
Mechanical, Kinetic and Morphological Correlations during the Scale Growth of Niobium and Zirconium Oxides
A Mechanism for the Erosion of EB PVD TBCS
Investigation of the Spallation of Oxides Grown on Thermally Cycled Heat Resistant Cast Steels
In Situ Measurement of Stresses in Alumina Scales by High Temperature X-Ray Diffraction
Deformation of FeO Oxide Scales upon Tensile Tests at 600-1200 DegreesC
Investigation of Oxide Film Growth Stresses by Finite Element Modeling and Deflection Tests
Hot Corrosion of Nickel-Base Alloys by Alkali-Containing Sulfate Deposits
High Temperature Oxidation Resistant Coatings Produced by Electro-Spark Deposition
Technological Aspects of Forming TBC-EB Ceramic Layers
Low Thermal Conductivity EB-PVD Thermal Barrier Coatings
Effects of Bond-Coat Preoxidation and Surface Finish on Isothermal and Cyclic Oxidation, High Temperature Corrosion and Thermal Shock Resistance of TBC Systems
High Temperature Oxidation of Thermal Barrier Coating Systems on RR3000 Substrates: Pt Aluminide Bond Coats
Degradation and Life Prediction of Gas-Turbine Duplex Coatings
A Study of the Corrosion Behaviour of Magnetron-Sputter Deposited Coatings in a Reducing-Sulphidising Atmosphere at 600 DegreesC
Cyclic Oxidation of Two Bond Coats in Thermal Barrier Coating Systems on CMSX-4 Substrates
Thermal Fatigue of Protective Coatings on CMSX-4 Superalloy
Effect of Aluminum Thermal Spray Coating on the Corrosion Resistance of a Steel Under Oxidant Atmosphere in a Fluid Catalytic Cracking Regenerator
Isothermal Oxidation of Conventional and Pt Modified Aluminide Diffusion Coatings on a Ni Based Superalloy
Metallic Precipitate Formation during Alumina Growth in a FeCrAl-Based Thermal Barrier Coating Model System
Effects of Platinum Additions on the Adherence of Alumina Scales to CVD Aluminide Bond Coatings
Microstructural Characterization of the Oxide Scale Grown at the Interface between PSZ Top Coat and MCrAIY Bond Coat
An Exploratory Evaluation of the Elaboration and Protection Properties of Chromium- or Aluminum-Containing Laser-Surfaced Coatings on Titanium
Why do EB-PVD NiCoCrAIY Coatings Oxidize Faster than their LPPS Counterparts?
The Influence of Bond Coat Surface Roughness and Structure on the Oxidation of a Thermal Barrier Coating System
Degradation of Advanced MCrAIY Coatings by Oxidation and Interdiffusion
Silicide Coatings for Niobium: Mechanisms of Chromium and Silicon Codeposition by Pack Cementation
Passivation of Nickel-Base Superalloy Inconel 690 by Pack-Cementation Chromium Coatings
Effect of Enamel Coating on the Corrosion of Ti60 Alloy
Cyclic Oxidation Performance of a CVD-FBR Aluminised 18Cr-8Ni Stainless Steel
Al Slurry Coatings for Molten Carbonate Fuel Cell Separator Plates
Critical Issues in Laser Surface Alloying to Form High Temperature Corrosion Resistant Alloys and Near Net Shape Components
An Evaluation of Tests for the Adhesion of Thermal Barrier Coatings
Investigation of a New Methodology in High Temperature Oxidation Application to Commercial Austenitic Steels
Role of the Microstructure on the High Temperature Oxidation Properties of the Intermetallic Compound NbAl3
A Pre-Normative Study on the Cyclic Oxidation Behaviour of PM Chromium: The Effect of Experimental Parameters
Electrochemical Impedance Study of the Corrosion of Fe-Cr Alloys in Molten (Li,K)2CO3 Eutectic Mixture
In Situ High Temperature X-Ray Characterization of Yttrium Implantation Effect on Pure Iron Oxidation at 700 DegreesC
Microstructural and Oxidation Study of Chromia Forming Molybdenum-Tungsten Based Alloys
Materials for Solid Fuel Fired Gas Turbines: Burner Rig and Laboratory Studies
Raman Spectroscopy Determination of Residual Stresses at Room Temperature in Chromia Scales Grown on Pure Chromium in Oxygen and in Water Vapour
In-Situ Impedance Spectroscopy Measurements of Fe-Cr-Al Alloys in a Flame Plasma
Effects of Fuel Composition and Combustion Parameters on Furnace Wall Fireside Corrosion in Pulverised Coal-Fired Boilers
Corrosion of High Temperature Alloys by Molten Glass
Corrosion Resistance of Alloys in IGCC Environment
Exploitation of Data of Alloy Corrosion in High Temperature Gases
Thermodynamic Stability Calculations in Predicting Corrosion Behaviour at Elevated Temperature
Superheater Materials Testing for USC Boilers: Steam Side Oxidation Rate of 9 Advanced Materials in Industrial Conditions
Steam Oxidation Resistant Coatings for Steam Turbine Components: A Feasibility Study
Materials Performance in Solid Fuel Gasification Systems
Metal Dusting Exposures of Modified Stainless Steels
Influence of Surface Preparation on the Corrosion of Steels in Simulated Waste Incineration Environments
Corrosion Mechanisms and Failure Cases in Waste Incineration Plants
Interactions between Oxidation and Deformation at High Temperature
Protection of Materials at High Temperature. What's Beyond Coatings?
Oxidation by Oxygen of Liquid Al-Mg Alloys during Elaboration Process
Hydrothermal Corrosion of Carbon-Based Materials
「Nielsen BookData」 より