Euro ceramics VII : proceedings of the 7th Conference & Exhibition of the European Ceramic Society, Brugge, Belgium, September 9-13, 2001 : seventh ECERS

著者

• European Ceramic Society Conference
• Belgian Ceramic Society
• Euro Ceramics

書誌事項

Euro ceramics VII : proceedings of the 7th Conference & Exhibition of the European Ceramic Society, Brugge, Belgium, September 9-13, 2001 : seventh ECERS

organised by the Belgian Ceramic Society og behalf of the European Ceramic Society ; co-ordinated by the Belgian Ceramic Research Centre

（Key engineering materials, v. 206-213）

Trans Tech Pub., c2002

• : set
• pt. 1
• pt. 2
• pt. 3

注記

Part 1 : Sessions P1, P2, P3, G1

Part 2 : Sessions G2, G3, G4, M1, M2

Part 3 : Sessions M3, M4, M5, M6, M7, M8, Miscellaneous

Includes bibliographical references and indexes

内容説明・目次

内容説明

Volume is indexed by Thomson Reuters CPCI-S (WoS). Comprising more than 600 papers, the aim of this 3-volume set is to provide the reader with a comprehensive overview of the relevant trends in the research and development of all aspects of ceramics. It will constitute an excellent reference source for every researcher working in the field.

目次

• Influence of Particle Size and Solid Loading on the Determination of the Isoelectric Point (IEP) of Ceramics Powders by Different Methods The Use of High Frequency Thermal Plasma to Synthesise Nanoscale Ceramic Powders Synthesis of the Negative Thermal Expansion Compound ZrW2O8 by the Spray Drying Technique The Role of Chemistry in the Synthesis of Ceramic Materials Synthesis of Barium Titanate Powders by Low-Temperature Aqueous Synthesis Using a New Segmented Flow Tubular Reactor Dispersion of Alumina with Different Polyelectrolytes Formation of TiC/Al2O3 Composites from Metal-Polymer-Precursors Preparation and Properties of Nanostructured Ceria-Zirconia Powders Pillared Layer Hydroxide Powders as Secondary Battery Electrode Materials Low-Temperature Sintering of Zirconia and Zirconia-Alumina Composite Nano-Powders Synthesis and Processing of Nano- -Al2O3 Powders Synthesis and Characterization of Rare Earth Phosphate Powders New Synthesis Routes for SiAlON and SiAlON Ceramics Crystallization Kinetics of Polysilane Derived SiC Crystallisation of Calcium Stabilised Zirconia Solid Solutions in the Ammonium Nitrate Liquid Measuring Granule Friction and Adhesion with an Atomic Force Microscope Study of Ilmenite CoMgTiO System Synthesis of Resins by Microwave and Infrared Heating as Precursors of Alpha-Alumina. Comparison of the Results Dispersing Si3N4 at High Solids Loading - Applied to Protein Forming Characteristics of Nano-Sized Titania Prepared by Sol-Gel Polymeric Route Synthetic Routes for Hydroxyapatite Powder Production Chemical Preparation of Pb(Ni1/3Nb2/3)O3 Powders Effect of Powder Characteristic on Handling of Powder, Structures of Green and Sintered Bodies of Ceramics Effects of PAA Molecular Weight on Adsorption Behavior of Alumina Slurry Effect of Particle Size Distribution of Primary Particle on the Characteristics of Alumina Ceramics In-Situ Investigation of the Compaction of Surface-Modified Silicon Nitride Powders Processing of Antiferroelectric Lead Zirconates under Hydrothermal Conditions Phase Transformation in Kaolin-Doloma Mixture Thermoluminescence and Sintering's Behaviour of Ultra-Pure -Alumina Doped by Th, Zr, Ce or Ca Microwave Technology Applications in the Synthesis of Ceramic Pigments A Novel Synthesis Method of Pure and Doped Lanthanum Ferrites Composition of Y2O3-ZrO2 Amorphous Spheres as Starting Materials of YSZ Ceramics Prepared by Sol-Gel and Ion-Exchange Method Particle Size Measurement of Ceramic Powders - A Practical Approach from 0.1 to 400 Microns Superparamagnetic Iron (III) Oxide Nanoparticles Synthesized by Combustion Flame Process Correlation between Structure and Rheological Properties of Suspension of Nanosized Powders Viscoelastic Behaviour of Concentrated clay Suspensions. Effect of Solids and Deflocculant Content Concerning about Synthesis and Sintering of CaTiO3 in Presence of Mineralisers Combustion Synthesis of La2-xCaxNiO4+ Ceramic Powders La2-xSrxNiO4+ Ceramic Powders Prepared by Combustion Synthesis Soft-Chemistry Methods for Synthesis of Gadolinium Based Perovskite Oxides Hydrothermal Synthesis of Tabular Perovskite Particles Amorphous SiCN(B) Preceramic Powders from Laser Spray Pyrolysis and Thermolysis Spray-Drying Derived Lead Magnesium Niobate Perovskite Ceramics Dilatometric Based Analysis of the Synthesis of Al2TiO5 Influence of Powder Granulometry on the Sintering of Binderless Tungsten Carbide Sintering Behaviour of Zirconia and Ceria-Doped Zirconia Powders Cristallized under Hydrothermal Conditions Functionally Graded ZrO2-WC Composites Processed by Electrophoretic Deposition Electrophoretic Infiltration of Woven Carbon Fibre Mats with SiC Powder Suspensions Injection Moulding of Suspensions Containing Natural Binders Developing a New Processing Route to Manufacture Honeycomb Ceramics with Negative Poisson's Ratio Water-Based Tape Casting and Manufacturing of Laminated Structures Analysis of Anionic Polymer Dispersant Behavior in Dense Silicon Nitride Suspensions with Oxide Additives by Using Colloidal Probe AFM Effect of Inter-Binder Interactions in Industrial Screen Printing Vehicles Rheology and Local Flow Behaviour of Ceramic Slurries in the Tape Casting Head Cementation Casting of Silicate Ceramic Slurry Colloidal Forming of Metal/Ceramic Composites Microstructural Development in Milli Wave Sintered Silicon Nitride Based Ceramics High-Purity Glasses and Ceramics Prepared by Sintering Compacts of Nanosized Particles: Advantages and Perspectives Reactions and Processing of In Situ Nonoxide-Boron Nitride (Nobn) Composites Finite Element Simulation of Compaction and Sintering of Ceramic Powders Anisotropic Grain Growth in Uniaxially Pressed Alumina Compacts Compression and Rupture Cycles as Tools for Compressibility Characterization, Application to Apatitic Calcium Phosphates Co-Sintering of Multilayer Ceramics Slip Casting and Sintering of Ti-Doped Nanosized Alumina Investigation of the Sintering Behaviour of Alumina Powders Containing Low Amounts of Na2O and SiO2 Sintering Process Optimization for Reaction Layer Control in Silicon Nitride Bearings Engineering the Toughness of CeO2-Stabilised ZrO2 A Model for a Single Screw Paste Extruder with Non-Constant Channel Depth Optimising Ceramic Feedstock to Injection Moulding Alkoxide - Modified Gelcasting of Alumina Si-C-O Ceramics from Preceramic Polymers: Reaction Mechanism between the Si-Filler and the Polymer Derived Matrix during Pyrolytic Conversion Rapid Prototyping of Complex Ceramic Parts Rapid Prototyping of Ceramic Casting Cores for Investment Casting Green Machining of Alumina Formed by CIP, Starch Consolidation and Latex Slip Casting Laser Micromachining of Silicon Carbide Evaluation and Experimental Studies of YSZ Grain Growth Dynamics under Heat Effect Metastable Phase Diagrams - Theoretical Methods for Estimation of Meta-Stable Phase at a Given Temperature Porous Molybdenum Particle Reinforced Glass Matrix Composites Fabricated by Microwave Processing Characterization of Wall Slip in Extrusion of Ceramic Pastes Complex Molds Shaping and Designing Rheological Properties of Zirconia/Paraffin Feedstocks Used for Plastic Forming of Zirconia Micro Parts Slurry Dispersion State as a Parameter to Control Internal Structure of Alumina Green Compact A Rapid Prototyping Process Chain for Ceramic Microcomponents A Novel Method to Investigate the Non-Uniformity of the Internal Structure of Granule Compact Effect of Al2O3 on the Sinterability of Fine Zirconia Powder Fabrication of Textured Alumina through Slip Casting in a High Magnetic Field and Heating Simulation of Silicon Carbide Converted Graphite by Chemical Vapor Reaction Method Effect of Ti-Doping on the Sintering Behaviour of Transition Alumina Stable Slips Preparation for Aqueous Slip Casting in Gd2O3-Doped CeO2 System Effect of Free Carbon Contained in SiC Raw Powders on Slip Casting and Sintering Processes ATZ Ceramics Prepared by Slip-Casting and Centrifugal Slip-Casting Microwave Drying of Alumina Ceramics Processing of Nanostructured Oxide Ceramics with Magnetic Pulsed Compaction Technique In Situ Direct-Casting of Alumina Slurry Stabilized with Zirconium Acetate Using Enzyme Reaction Microwave Sintering of Si3N4-Ceramics Adding Yttrium or Ytterbium Oxides Diffusion Process in Ba-Sr-Titanate System under Microwave Heating Surface Hardening of the TiY-TZP Manufacturing of Advanced Ceramic Components via Electrophoretic Deposition Pure and Fine Yttria-Doped Alpha-Alumina: Sample Elaboration and Diffusion Studies Textured Alumina Ceramics by Uniaxial Pressing Aqueous Tape Casting of Al2O3 Based on Alginate Gelation Influence of Gelling Additives in the Green Properties of Al2O3 Bodies Obtained by Aqueous Gel Casting Effect of Different Si3N4 Starting Powders and Sintering Conditions on the Grain Morphology and Mechanical Properties of -SiAlON Ceramics Effect of PEO/PPO Type Triblock Copolymers on Dispersion Behaviour of Aqueous Alumina Suspensions Thin Wall Ceramic Tubes by Extrusion of Thermoplastic-ZrO2 Compounds Preparation and Characterization of X-O'Sialons Ceramics Produced by the Reaction Sintering Extrusion of Ceramic Tubes with Controlled Bends In Situ Monitoring Reaction Sintering of Dolomite-Based Systems Anisotropic Grain Growth in 'Ultra-Pure' -Alumina Caused by Lanthanum Doping Grain Oriented Microstructure Made in High Magnetic Field Properties of Various Ceramics with Using Slipcasting Techniques Alignment of Strontium Ferrite Particles during Extrusion in a Magnetic Die Developments in Vapour Deposited Ceramic Coatings for Tribological Applications Laser Pyrolysis of Polysilazane - A New Technique for the Generation of Ceramic-Like Coatings and Structures Mechanical and Optical Properties of c-BN Films Deposited by ECR-Microwave PECVD Simple Processability of Precursor-Derived SiCN Coatings by Optimised Precursors The Influence of Sol Gel Precursors and Substrate Type in the Spin Coating of CeO2 Thin Films Joining by Liquid Wetting and Capillarity of Silicon Nitride and Silicon Carbide Interactions at Zirconia-Au-Ti Interfaces at High Temperatures Capacitor Discharge Joining of Silicon Carbide Based Ceramics TiO2 Film Formed by Ultrasonically Spraying Titania Sol Formation of Fine-Dispersion Structures of Wear- and Corrosion Resistant Coatings Using AlN-TiB2/ZrB2 Composites Microstructure of Metallic Layers Sintered on Nitride Ceramics Depending on the Oxygen Content in the Reactive Layer Reactive Magnetron Sputtering of Indium Tin Oxide on Acrylics Investigation of the Wetting Characteristics of Chromium Based Active Braze Alloys on Silicon Nitride The Direct Bonding of Metals to Ceramics for the Manufactured Microwave Packages Nanocrystalline Coating by Electrophoretic Deposition (EPD) Effect of Tantalum Addition on Optical Transmittance and Electrical Resistivity of TiN Thin Films Prepared by d.c. Magnetron Sputtering Modelling of the Growth of Carbide Layers in Tantalum Structural Characterization of Amorphous Carbon Nitride Thin Films Prepared by Pulsed Laser Deposition Oxygen Influence on Wetting and Bonding between Copper and Aluminum Nitride Formation of TiO2-SiO2 Composite Thin Films and their Crystallization Behaviors Atomistic Simulation of the Surface Energy and Structure of the Clean and Hydrated Surfaces of Spinel MgAl2O4 Pulsed Laser Deposition of Diamond Like Carbon (DLC) and Zirconia-Toughened Alumina (ZTA) on Steels and PMMA Spraying Parameter Optimization and Ageing Behavior of Zirconia Stabilised by Magnesium Oxide Influence of AlN Intergranular Phases on Wetting and Bonding between Copper and Aluminum Nitride Remote Microwave Plasma Enhanced Chemical Vapor Deposition (RMPECVD) of Silica and Alumina Films Interfacial Reactions between Titanium Nitride-Titanium Diboride Ceramics and Nickel Chemical Vapour Infiltration on SiC in Porous Graphite Materials Preparation and Properties of a-C:H and a-C:N:H Layers Nanostructured and Multilayered Al2O3 Thin Films Obtained by Sol-Gel Method Microwave Glazing of Alumina-Titania Ceramic Composites for Enhanced Properties Mo-Based Compounds for SiC-SiC Joints Admissible Stresses in Thermal Sprayed Coatings Modelling of Ceramic Microstructure Y and Zr Tracer Diffusion in Yttria-Stabilized Zirconia at Temperatures between 1250K and 2000K Second Phases and Tribological Behaviour of Low Purity Aluminas Influence of Electrical and Geometrical Boundary Conditions on Crack Growth in PZT Acousto-Ultrasound Nondestructive Characterization of Rigid Ceramic Hot Gas Filters Measurement of the Residual Stress of Matrix-Embedded Fibers by Raman Spectrometry: State of the Art and Perspectives Recent Advances in the Use of the Impulse Excitation Technique for the Characterisation of Stiffness and Damping of Ceramics, Ceramic Coatings and Ceramic Laminates at Elevated Temperature Structure, Composition, and Properties of Interlayers in Carbon Fiber Reinforced Alumium Wires Toughness (KIC) Measurement by a Sliding Indentation Method Refinements to the Surface Crack in Flexure Method for Fracture Toughness of Ceramics Structural and Mechanical Properties of Particulate, Whisker and Unidirectional Bi-2223/Ag Composites Influence of Grade of Agglomeration and Green Body Liquid Saturation on Bending Strength and Fracture Toughness of Slip-Cast Alumina Colloidal Processing and Superplastic Properties of Fine-Grained Zirconia-Based Ceramics Characterisation of Defects in Dry-Pressed Green Bodies The System Al2O3-SiO2. Calorimetric and Thermoanalytical Studies of Phases in the System Direct Observation of Three-Dimensional Structure in Powder Compact Characterisation of Alumina-Based Metal Cutting Tools MoSi2 - Al2O3 Cermet Type Fracture Resistance of Surface-Nitrided Zirconia Nondestructive Characterization of Monolithic Ceramics by X-Ray Refraction Non-Destructive Mechanical Characterization of (Nano-Sized) Ceramic Fibers Reference Materials for Adequate Porosity Measurements Ceramography and Segmentation of Polycristalline Ceramics: Application to Grain Size Analysis by Automatic Methods Influence of Shielding on the Subcritical Crack Propagation in Zirconia Ceramics Evaluation of Ultrasonically Determined Elasticity-Porosity Relations on Cubic Zirconium Oxide Ceramic Physical Properties of Aluminum Nitride Ceramics Direct Measurement of Transformation Zone in Zirconia Based Ceramics by Raman Spectroscopy Structural Analysis of Ho2MnxTa2-xO7(x=2/3 and 1.0) with Incommensurate Nature by Electron Microscopy Characterization of Hot Gas Filter Elements Chemical Stability of Ceramic Bodies in Alkaline Solutions Phase Transformations in the Ternary Systems ZrO2(HfO2)-Y2O3-Eu2O3 at 1250 DegreesC X-Ray Powder Diffraction Analysis of Liquid-Phase-Sintered Silicon Carbide Ceramics Quantitative Determination of Cristobalite, Mullite and Corundum Simultaneously by X-Ray Powder Diffraction ESEM Investigation of the Reaction Mechanism in Pr-Doped Zircon Interaction of Some Special Co, Fe and Ni Alloys with SiAlON Ceramic Molecular Dynamics Simulations on the Atomic Structure of a-Si1-xCx New Developments in Size and Shape Determination Methods for Anisometric Particles Super Structure of Tricalcium Silicate Doped with ZnO Influence of Relative Humidity on Mechanical Properties of Alumina, PZT and Zirconia Fracture Analysis of Model Materials as a Substitute of Quasi-Brittle Ceramics Phase Studies of Reactive Infiltrated Boron Carbide-Aluminium Composites by Quantitative XRD Stoichiometric Default in MgAl2O4 Spinel: Space Charge in Grain Boundary Investigation Experimental Investigations and Thermodynamic Evaluation of the Sn-Cu-O System Application of Acoustic Method for Evaluation of Elastodynamic and Pseudoplastic Parameters of Ceramics In-Situ High Temperature Study of Ceramics and Ceramic Ultra-Thin Films Using a X-Ray Diffractometer with a Parabolic Multilayer Mirror The Notch Factor k as a Design Parameter for Ceramic Components Fretting Wear of Self-Mated Tetragonal Zirconia Ceramics in Different Humidity Internal Friction Characteristics of Y-TZP: Indications for Phase Transformability and Structural Integrity Phase Relationships in the Pseudoternary BaO-ZrO2-MoO3 System Creep of Uranium Dioxyde in Bending Effect of Pores and Grain Boundaries on the Thermal Conductivity of Tin Oxide Wear Behaviour of Ceramic Materials: A General Approach Kinetics of Consecutive Reactions in the Solid State: Thermal Decomposition of Oxalates Microstructure and Mechanical Properties of B4C-CrB2 Ceramics [Crack-Healing + Proof Test] : A New Methodology to Guarantee the Structural Integrity of Ceramics Component Crack-Healing Behavior under Stress and Fatigue Strength at Elevated Temperature of Crack-Healed Si3N4/SiC Composite Ceramics A Comparative Study of the Fracture Behaviour of Alumina Matrix Composites Reinforced with Silicon Carbide Particles either of Micro or Nanosize Methodology for Life Cycle Assessment of Ceramic Floor and Wall Tiles - Applications in BAT Definition for Ceramic Tiles Industry Recycling of Steel Slag in Clay Brick Production Analysis of Pyrolysis Products during Thermal Decomposition of Organic Components in Ceramic Green Bodies The Utilization of Water Industry Wastes in Ceramic Products Modified Porcelainized Stoneware Tiles Obtained from Recycling of Granite and MSW Incinerator Fly Ashes Effects of Glass Waste Addition on Technological Properties of Porcelain Stoneware Tiles Industrial-Scale Study of NaHCO3 Chemical Reactions with HF, HCl and SO2 in Kiln Flue Gases Chromium-Bearing Phases in the System MgO-SiO2-Al2O3-Cr2O3, and their Relevance on Chromium Inertization in Ceramic Systems Microstructural Morphologies of Slag Based Glass-Ceramics Nucleated with 5wt% Cr2O3 and 5 wt% Cr2O3 + 5 wt% TiO2 Glass-Ceramic Matrix Composites Made from Industrial Waste Sintering of Wastes Powders from Copper Extraction Process Environmentally Conscious Sintered Glass-Ceramics Production of Steelmaking Slag Blocks by Carbon Dioxide and their Durability in the Sea New Glasses and Glass-Ceramics by Recycling of Spanish Urban Incinerator Fly Ashes Recent Advances in New Type of Glass-Ceramics Glazes (GCG) from Natural Raw Materials and by Recycling of Industrial Wastes Chlorine History in the Treatment of Flying Ashes from Domestic Wastes by a Transferred Arc Processing of Highly Porous Hydroxyapatite from Waste Raw Materials Identification of Antique and Modern European or Asian Porcelains by Non-Destructive Raman Spectrometry Painting and Firing of Late Etruscan Votive Terracottas Characterization Studies of Late Ottoman Ceramics Recovered from Istanbul Tekfur Palace Excavation Ceramic, Tradition and Sociology: Approaching Turkish Ceramic Practice Preliminary Archaeometric Study on Ancient Pottery of Puente del Arzobispo (Toledo, Spain) Short Fibre Reinforced RBSN Performance of New - SiAlONs in Turning Operations Synthesis of Alumina Based Abrasive Grain from Solar Energy Ceramic Based Solar Cells in Fiber Form Experimental Researches Regarding the Thermal Behavior of the Machine-Tools Main Spindle with Ceramics Bearings High Temperature Humidity Sensor The Ceramics of the Chalcolithic Vadastra Culture Perspectives on the Development of Ceramic Composites for Cutting Tool Applications Zirconium Diboride-Based Composites Effect of Residual Stress on the Fracture Toughness of Al2O3/Al Gradient Materials A Model Analysis on Multi-Crack Mechanisms in Ceramic/Superplastic Laminates Thermal Conductivity of M-Si-N (M = Mg, Ca, Sr, Ba) Compounds with Varying M/Si Ratio In Situ Synthesis and Microstructure of Dense CaAl4O7 Monolith and CaAl4O7/CaZrO3 Composite Mechanical Properties of Metal Reinforced-Al2O3 Based Micro and Nanocomposites Ca/La-Doped -SiAlON Ceramics Microstructure and Creep of SiCf-SiBC Al2O3-YAG-ZrO2 Ternary Ceramics from Melts Toughening Ceramics with both Ceramic and Metallic Inclusions Zirconia Reinforced Alumina Composites Prepared from Powder Alcoxide Mixtures: Stable Grain Size after Superplastic Stationary Creep Sol-Gel Elaboration and Characterisation of Al2O3/SiC Nano- and Microcomposites for Wear Applications Improvement of Elongated -SiAlON Ceramics by Variation of the Processing Conditions and Amounts of Additives Superplastic Flow in 3 mol % Yttria-Stabilized Zirconia at High Temperatures Preparation and Microstructure of Liquid Phase Sintered SiC Laminar Materials Effect of MgSiN2 Addition on Microstructure and Thermal Conductivity of Silicon Nitride Ceramics Measurements of Surface Residual Stresses in Si3N4 Based Laminates by Raman Spectroscopy Influence of Zirconia and Zircon Additions on the Properties of Dense Cordierite Ceramics Effect of Porosity on Properties Si3N4 Microstructures and Properties of In Situ Nonoxide-Boron Nitride (Nobn) Composites Alumina-Aluminium Titanate Composites with Improved Thermal Shock Resistance Production of B4C / Al Composites Cf/SiC Composites by a Low-Cost Manufacturing Process Processing and Structural Characterisation of 3Y-TZP Ceramics Resistant to Hydrothermal Ageing The Mechanical Property of Squeeze Casting AlN/Al Composite Low Cost SiC/Si3N4 Nanocomposites Some Aspects of Inter-Relation of the Statistical Properties of Micro- and Macrostructure of WC - Co Ceramics Development of AlN-(Ti, Cr)B2 Composite Ceramics and Study of their Corrosion Resistance in Air up to 1550 DegreesC Influence of Sintering Conditions on ZTA Composites Characteristics Mullite-Zirconium Composites Reinforced with Ceramic Fibres Resistant to 1450 DegreesC
• Obtaining and Properties SiCN Nanocomposites : Powder Synthesis, Materials Processing and Ductility Assessment Cavity Growth Processes during Superplastic Flow in Alumina at High Temperatures The Scattering of Non-Equilibrium Phonons in Al2O3 Nanoceramics Integration and Utilization of some Volcanic Rocks for Technical Ceramic Surface Fracture Testing of Alumina with Spherical Indentation and Recording Hardness Tester Improvement of Aluminium Nitride Properties through the Addition of Silicon Carbide Nanoparticles Silicon Nitride / Silicon Carbide Nanocomposite Materials: Fabrication and Mechanical Properties at High Temperature Translucent Fibre Reinforced Glass Advanced Ceramic Based on the Ternary Systems ZrO2(HfO2)-Y2O3-Eu2O3 Kinetic Studies of the Corrosion of Si3N4 Materials in Acids Refinement of the Microstructure of Self-Reinforced -SiAlON Ceramics Fabrication and Spark Plasma Sintering of -Si3N4 Particles Coated with Nano Sized TiN Particles Composite Spinel - Zirconium High Temperature Deformation of Spinel-Zirconia Composites Grain Boundary Sliding Accommodation BN-Si3N4 Composite Synthesized by Direct Nitridation of SiB6 Alloy Influence of Grain Boundaries on the Properties of Dense Alumina Ceramic Development of Microstructure during Creep of Mullite and Mullite 5 vol% SiC Nanocomposite Application of First-Principles Methods for the Calculation of the Crystal and Electronic Structure of Oxynitrides Preparation and Mechanical Characterisation of Aluminium Nitride-Titanium Nitride and Aluminium Nitride-Silicon Carbide Composites Mechanical Properties of Melt Infiltrated Boron Carbide-Aluminium Composites Fabrication and Characterization of Cordierite/Mullite Composites from Sol-Mixtures Burner Rig Corrosion of Ceramic Composites Using Different Fuels Refractory Composites of Deeply Depressed Thermal Expansion High-Performance Si-N-O Fibres: Pilot-Scale Production, Characterisation and Applications Toughness Optimisation of ZrO2-TiB2 Composites Microstructural Differences in Silicon Nitrides with and without a Small Amount of TiN Additive Y-TZP Ceramics with Tailored Toughness Contribution of Crack-Bridging to the Reinforcement of Ceramic-Metal Composites / Definition of an Optimum Particle Size Influences of the Nature and Concentration of Synthetic Fibres on the Mechanical Properties of Plaster-Based Composites Processing and Properties of Bulk and Thin Film Electroceramics Produced by Combining Hydrothermal and Conventional Synthesis Routes SiO2 Nanosphere Synthesis Stabilization of Monoclinic SrAl2O4 through the Formation of Solid Solutions of the Type SrAl2-xBxO4 Materials for Methane-Fueled SOFC Systems Oxygen Transport in LaFeO3 Influence of Glass Content on Microstructure and Electrical Conductivity of a -Alumina Thick Film Ceramics Based on SmCoO3- Prepared by Combustion Synthesis as Catalysts in Hydrocarbon Partial Oxidation Preparation and Characterization of Composition Graded K(Ta, Nb)O3 Crystals Oxygen Pumping Characteristics of Cu-Ti Double Substituted Bismuth Vanadate Direct Observation of Asymmetry in the Barrier Structure of Zinc Oxide Varistors Using REBIC Microscopy NOx Sensors Based on Interfacing Yttria Stabilized Zirconia with p and n-Type Semiconducting Oxides Recent Progress in the Development of Mn-Zn-Ferrites for Applications at High Frequencies in Electronics Atmospheric Plasma Spraying of a High Productivity Spray-Dried Superconducting YBa2Cu3O7-x Powder Optical Bistability in Ceramic Oxides Effect of Crystallization Ambient on Orientation Selection in Sol-Gel Derived Pb(Zr,Ti)O3 Thin Films on Pt Electrode Layers Microstructural and Electrical Properties of Ba0.5Sr0.5TiO3 in Bulk and Thick Film Form Nanophase Ferroelectric Ceramic Memories Electric Field and Stress Concentrations in Various Types of Multilayer Electrostrictive Actuators Features of Phase Diagrams of Binary Pb(B1/2Nb1/2)O3-PbTiO3 Systems in Vicinity of Morphotropic Phase Boundaries In-Situ Shrinkage Measurements of LTCC Multilayers by Means of an Optical Dilatometer Crystallisation and Tetragonal-Monoclinic Transformation in ZrO2 and HfO2 Dielectric Thin Films Microwave Dielectric Properties and Microstructural Characteristics of Aliovalently Doped Perovskite Ceramics Based on CaTiO3 Templated Grain Growth of Textured Piezoelectric Ceramics Design Optimization of Piezoelectric Composite Transducer Using Finite Element Method Interactions between PZT Thick Films and Ni Substrates DSC and Dielectric Investigations in New Oxifluoride Ceramics Ca(Ti1-xLix)O3-3xF3x Leakage Current and Fatigue in Ceramic Ferroelectric Oxides Investigation into the Processing and Characterisation of Piezoelectric Nanocomposites Aging Phenomena in Cu0.1Ni0.8Co0.2Mn1.9O4 NTC Ceramics In-Situ TEM Study of High Temperature Stability of LaCoO3 Based Ferroic Perovskites Quantum Chemical Study of Effects Produced by Nb- and La-Doping in BaTiO3 A Model for a Barrier ZnO Varistors Dielectric Data of Zn- Doped Alumina Materials Obtained from Different Precursor Powders Ceramic Electrolytes Based on CaZrO3 Effect of Cerium Oxide Addition on Electrical Properties of ZnO Obtaining of BaTiO3 Ceramics via a Sol-Gel Colloidal Process LaMeO3 Perovskite-Type Ceramic Powders Obtained by the Polymerizable Complex Method Electrical Characterisation of Coefficient Thermistors NTC with Perovskite Structure Effect of the Sb2O3 Addition on the Bi2O3 Polymorphism Fabrication and Properties of PMS-PZT Green Sheet The Complexation Reagents in Synthesis by Wet Procedure of Cu and Zn Mixed Ferrites Microstructural and Electric Properties of Bismuth-Layered Structured Ceramics - SrBi2(Ta1-xNbx)O9 Dopants and Dielectric Properties of -Eucryptite and -Spodumene Porclain Low Voltage TiO2 Varistors Doped with Ta2O5 and Cr2O3 Relationship between Magnetoresistance and Microstructure in Sintered La0.67Sr0.33MnO3 Perovskite Added by Silica Dense Ceramic Bodies of Seeded-Pure Lead Titanate Obtained by Pressureless Sintering Effects of Low-Temperature Annealing on the Microstructure and Electrical Properties of Doped-ZnO Varistors Crystalline Structure and Electrical Properties of Solid Solutions YCoxMn1-xO3 Microstructural Aspects of Ionic Conductivity in Yttria and Magnesia Stabilised Zirconia Electrical Properties of KNbO3 - BaTiO3 Ceramics Synthesis of FeAlO3 by Coprecipitation Characterization of the Bi2O3-TeO2 System with Respect to Oxygen Partial Pressure The Reaction of BaTiO3 Ceramics with a Fluorine-Containing Atmosphere Preparation and Performance of Thick Film NTC Thermistors The Estimation of -Site Ordering in Relaxor PNN (Pb(Ni1/3Nb2/3)O3) by Raman Scattering Spectroscopy and Transmission Electron Microscopy Screen Printed Barium Titanate Thick Films Prepared from Mechanically Activated Powders Synthesis and Dielectric Properties of SrBi3Ti2NbO12 Ceramics with Layer Perovskite Structure Production and Properties of Lead Scandoniobate Ferroelectric Ceramics Doped with Rare-Earth Oxides Positive Temperature Coefficient of Resistance in Indium Oxide Ceramics Current Limiting Effect in In2O3 Ceramics Based Structures Stress-Induced Domain Switching of PZT Subjected to Cyclic Uniaxial Compression Preparation of Precursor Solutions for ITO Thin Film Formation by a Reaction of Glucose with In(III) Alkoxide and Sn(II) Halogenides Cu Doping as a Tool for Understanding CMR Sintering and Grain Size Influence on the Electrical Properties of the Bi26Mo9WO69 Ceramics REBIC Studies of Heterojunction Gas Sensor An AC Impedance Study of the Transient Response of a WO3 Gas Sensor to NO2 Synthesis and Properties of Pb-Doped Bi-2212 Phase TEM Study on the Alignation of BSCCO-2223 Phase along Ag-Whiskers in a Bulk Composite Influence of Barium and Strontium Addition on the Ratio c/a of PZT Obtained by the Polymeric Precursor Method Electrical Behaviour of the Sintered SnO2-Based Ceramics Influence of Powder Synthesis Route on the Reactivity and the Electrical Properties of PZT Ceramics Electrical Properties and Percolation Concentration in Si3N4-TiN Based Composites Orientation Control of KNbO3 Thin Film on Silicon Wafer with Chemical Solution Deposition Chemical-Technological Approach to the Selection of Ceramic Materials with Predetermined Thermistor Properties Synthesis and Characterisation of Microwave La(Mg,Ti)O3 Ceramics PZT - Polymer Composites for Hydrophones: Production and Modelling Determination of the Piezoelectric Properties of Fine Scale PZT Fibres Dielectric Properties of Barium Strontium Titanate / Non Ferroelectric Oxide Ceramic Composites Thermal, Electrochemical and In-Situ Structural Study of Stabilized LiNiyCo1-y-zMzO2 (M = Al and Mg) Lithium-Ion Cathode Materials Prepared by a Soft Chemistry Route Transmission Electron Microscopy Study of Ti-Doping Effect on Alumina Sintering Behaviour Chemical Routes to Monolithic Hydroxyapatite Formation Crack Growth Resistance of Zirconia Toughened Alumina Ceramics for Joint Prostheses In Vitro Bioactivity of SiO2, CaO, Na2O-Based Glasses Fabrication of Porous Hydroxyapatite by Foam Technique Biofunctionalised Biocompatible Titania Coatings for Implants Hydroxyapatite Formation on CaSiO3 Ceramics in Protein Containing System Influence of Raw Powder Granulometry on the Mechanical Properties of a Calcium Phosphate Bone Cement Surface Phenomena on Gel-Derived Bioceramics - Chemical and Clinical Aspects Investigation on Phase Separation and Crystal Growth in Glass-Ceramics Containing Fluoroapatite Effect of Chemical Composition and Morphology of Zirconia Particles on Properties of HAp-Zirconia Particulate Composites Stability and Corrosion Resistance of Titanium Nitride in Biochemical Media Crystallization Behavior of Calcium Phosphate Glass In Vitro Behavior of Plasma Sprayed Hydroxyapatite Coatings Related to their Chemical and Microstructural Characteristics Tests'In Vitro' on Fluorapatite-Alumina Biocomposites Bioceramics of Ca Phosphate and SiO2 Composites Composite Bioceramics Hydroxyapatite Synthesis Fracture Toughness of Calcium Hydroxyapatite and Spinel at Different Humidities and Loading Rates Mechanical Properties of Alumina-Glass Dental Composites The Influence of Sputtering Deposition Pressure on the Bioactivity of Alumina and Zirconia Thin Films Alumina Fibre Reinforced Hydroxyapatite: Thermoanalytical Investigations and Microstructure Effects of Sintering on Mechanical Properties of Biologically Derived Hydroxyapatite Porous Bioceramic Materials Bioactivity of Na2O, CaO, SiO2, P2O5 Modified Glasses Sintering and Mechanical Properties of Hydroxyapatite-Zirconia Composite Ceramics Influence of Silica and Alumina Doping on the Microstructure and the Mechanical Properties of Zirconia Ceramics Used for Joint Prostheses Applications Crack Shielding Degradation in Alumina during Cyclic Fatigue Investigation of Slow Crack Growth in Dense Hydroxyapatite Using the Double Torsion Method Alkalies and Cement Clinker Reactions on Basic Refractories Numerical Modelling of the in Service Thermomechanical Behaviour of Refractory Parts Used in Continuous Steel Making Oxidation of Silicon Nitride Bonded Silicon Carbide Refractory Material in Air and Carbon Dioxide Test and Numerical Simulation of the Mechanical Behaviour of Silicon Carbide-Based Refractories Effect of the Drying Cycle on Dried Tile Mechanical Strength Ultrasonic Investigation of the Mechanical Behaviour at High Temperature of Alumina-Spinel Castables Study of the Influence of the Parameters Acting on the Thermomechanical Properties of Refractory Bricks Zirconium Phosphate Binder for Periclase Refractories Development and Application of Refractory Materials in U.S. Steel Kosice, s.r.o. Stabilized Alumina - Silica - Zirconia Refractories within the System Al2O3-(Cr2O3)-SiO2-ZrO2(MO) Experimental Study Regarding the Synthesis of the Cordierite in Ceramic Bodies in the MgO-Al2O3-SiO2 System Solid State Reaction Kinetic in Refractory Systems with Fusion Cast Grains Stabilisation of Zirconium Dioxide in the ZrO2-CeO2-SrO System Prediction of Thermal Shock Behavior of Alumina Based Refractories: Temperature Difference, Fracture Resistance Parameters and Water Quench New Developments in Aluminium Titanate Ceramics and Refractories The Influence of BaO on the Reaction of Oxide Ceramics by Molten Aluminium Alloys A User's Approach to Characterising Ceramic Tile Suitability for Use and Standardisation Creep of Vitreous China: Influence of Microstructure Bauxitic Porcelain - A New High-Tech Product for High-Voltage Insulation Effect of Firing Temperature, Quartz Grain Size and Content on Bending Strength and Microstructure of Sanitaryware Porcelain Nano and Micrometric Particles Dispersion in Traditional Ceramics Rheological and Slip Casting Behaviour of Low Clay Containing Translucent Whitewares Chemical Activation of Clay Raw Material Mechanical Properties of Porous Tiles and their Correlations with Microstructure and Composition of the Ceramic Body Frost Resistance of Ceramic Floor Tile: A Prenormative Study Study of Ceramic Tile Drying under Non-Isothermal Conditions and its Industrial Application Wear Resistance and Stain Resistance of Porcelain Stoneware Tiles Anionic Clay and Hydrotalcite Synthesis The Influence of the Raw Material Grinding Fineness on the Brick Industry Products Quality Possibilities of Producing Sintered Bricks from Mixtures of Plastic Brick Clay and Fly Ash Utilization of Red Mud in the Manufacture of CeramicTiles Study Concerning the Grinding of the Glazes for Porcelain Obtained by Fast Firing Design of Green and Fired Microstructure of Ceramic Wall Tiles Industrial Wastes as Raw Materials for Tile Making Ceramic Cooking Ware The Influence of Magnesium Silicates on Technological Behaviour of Porcelain Stoneware Tiles Mechanical Properties of Porcelain Stoneware Tiles: The Effect of Glass-Ceramic Systems Geological and Technological Characteristics of Clays Deposits from the West of Romania Use in Traditional Ceramics Resources of Raw Materials for Ceramics, Binders and Glass - from the North-East Part of Romania Tiles Production with Row Materials of the Apennines: Emissions Control Development of a New Method of Evaluating Impact Resistance The Mullitization Process in Fast Firing of KOC Kaolinite Effect of Different Starting Hemihydrate Powders on the Performance of Gypsum Moulds Synthesis of an Iron-Chromium Ceramic Pigment by Using Limonite and Chromite Mixtures FEA Modelling of Deformation during Vitrification of Ceramic Materials White Pastes Designed from Morrocan Raw-Materials for Ceramic Tiles Fabrication New Cementitious Systems and Composite Materials A Case History of Concrete Degradation Induced by an Absorbing Well Monitoring of Calcium Aluminate Cement Setting at the Early Age by Acoustic Emission Technique Study of the Substitution of Cement Raw Mix by Rejected Lignite from Power Station Quarries Rheological Comparative Studies on the Portland Cement Admixed at Grinding Application of X-Ray Computed Tomography for Evaluating Density-Gradient Formation during Hydration of Aluminous Cement at the Young Age Macrodefect-Free Cements: Chemistry and Impact of the Environment By-Pass Cement Dust as Mineralizer for Clinkering of Cement Raw Mix Burnability of Cement Raw Mix Containing B.F. Slag Structure of Autoclave Porous Concrete SIBIT (YTONG) Influence of the Particle Size Uniformity Degree on the Portland Cement Properties Generalized Indicator to Define the Particle Size Uniformity of Powdery Mixes Use of Selected Minerals as Secondary Raw Materials in Cement Industry. Part I: Effect on the Burnability of Raw Mix Use of Selected Minerals as Secondary Raw Materials in Cement Industry Part II: Effect on Clinker Structure Factors Affecting the Reactivity of the CaO-SiO2-Al2O3-Fe2O3 Mixture Surface Phenomena in Aqueous Inorganic Systems with Plasticizer Content Non-Destructive Ultrasonic Evaluation of Thermal Damage in Cementitious Materials Ceramic Foams: Fabrication, Properties and Applications Chemical Stability of Ceramic Multi-Layer Membranes Corrosion Resistance of Porous Alumina Ceramics in Acetic Acid Solution Monolithic SiOC Ceramics with Tailored Porosity New Al2O3 Membranes and Catalyst Substrates: Nanoporous Alumina and Corundum for Ultra- and Microfiltration Porous Materials, Synthesis and Charaterization Porous Ceramics Derived from Wood Porous Properties of Polymeric Al2O3-SiO2 Xerogels New Mesoporous Templated Silicas (MTS): Merits and Challenges Ordered Mesoporous Silicate Materials from a Template of Triblock Copolymer (I): Size Control and Characterization of Powder Porous Ceramics Formed Using Starch Consolidation ATZ Ceramics Prepared by Slip-Casting and Centrifugal Slip Casting Porous Al2O3 Ceramics with High Surface Area and Superior Mechanical Properties Fabricated by the Decomposition of Al(OH)3 Starch Consolidation Casting of Alumina Ceramics - Body Formation and Microstructural Characterization Porous SiC Ceramics Obtained by SHS (Self Propagating High Temperature Synthesis) Colloidal Processing of Nanoceramic Powders for Porous Ceramic Film Applications Aluminium-Free Lamellar Mesostructured Silicate Obtained by Liquid Crystal Templating in Soft Conditions Ordered Mesoporous Silicate Materials from a Template of Triblock Copolymer (II): Synthesis of Film and Application for Gas Sensor Development of a Co-Firing Technique for the Production Process of Ceramic Ultrafiltration Membranes The Effect of Powder Characteristics on the Ceramic Pore Structure and Mechanical Properties Graded-Porosity Structures from Aluminum Titanate Studies Concerning the Influence of some Parameters in Preparation of Zeolite Membranes Incorporation Feasibility of Leather Residues in Bricks Manufacturing of Porous Oxide Ceramics by Replication of Plant Morphologies CVI-R Gas Phase Processing of Porous, Biomorphic SiC-Ceramics Fabrication of Porous Smectite/SiO2 Composites Microstructure Control of Porous Mullite Ceramic by Gel-Casting The Fracture Energy of Porous Ceramics Ceramic Tile Glazes: Design, Trends and Applications Application of Ancient Japanese 'Koro-kan' Glass Composition as a Non-Leaded Glaze Glasses, Glazes and Glass-Ceramics at the Starting of the Millenium Kinetics of the NaPO3 Glass Devitrification Studied by Differential Thermal Analysis and X-Ray Powder Diffraction Production of Glass-Ceramics from Coal Ash and Waste Glass Mixtures Effect of Devitrification on Frit Particle Sintering during Firing Properties of M1-M2-Si-Al-O-N Glasses (M1 = La or Nd, M2 = Y or Er) Characterisation of SiCN/SiCO Glasses via SEM and TEM Unusual Luminescence Phenomena in Ce(III)-Doped M-Si-Al-O-N Glasses (M = Sc, Y, Gd, La) Modification of Green Bodies by Incorporating Nanosized Particles via Electrophoretic Deposition (EPD) Effect of Modifier Content on the Crystallization and the Optical Gaps of TeO2-LiCl Glass Contribution of Germanium Dioxide to the Thermal Expansion Characteristics of some Borosilicate Glasses and their Corresponding Glass-Ceramics Crystallisation of some Glasses in CaO-MgO-Al2O3-SiO2 System Basaltic Scorias from Romania - Complex Building Material Use for Concrete, Glazing Tiles, Ceramic Glazes, Glass Ceramics, Mineral Wool Crystallization Behaviour of xTeO2-(1-x)LiCl (x = 0.5 and 0.7 mol.) Glasses Crystallization Characteristics of Lithium Calcium Gallium Aluminium Borosilicate Glasses Synthesis and Characterization of Gel-Glasses in the SiO2-ZrO2-Al2O3 System Experimental Versus Computer Simulation Analysis of Zirconia Containing Glasses Chemical Durability Behaviour of Bulk Glasses in the SrO-Mn2O3-Fe2O3-MgO-ZrO2-SiO2 (SMFMZS) System Study of New Conductive Oxyfluorides Based on Bismuth, Vanadium, Zinc Preparation of Coloured Glasses with Nanosized Secondary Phases via Sintering of Colloidal Gels Leadless Glazes for Redware CaO-MgO-Glaze for Cordierite Clay Body An Extension of the Liquid-Forming Region in the M-Si-Al-O-N System Turkish Glass Culture and its Relationship with Contemporary Glass and Education Non-Conventional Ceramic Pigments Oxidation State of Chromium in Red-Shade Ceramic Pigments Based on Solid Solutions with Pyrochlore Structure Mullite Glass-Ceramic Glazes Synthesized through a Sol-Gel and Ceramic Mixed Process Emission Spectroscopy Study of Ceramic Pigments with Perovskite Structure Influence of the Synthesis Method and some Mineralizers on the Color Hue of CeO2-PrO2 System Laminated and Functionally Graded Materials Prepared by Spark Plasma Sintering Non-Catalytic Growth of Multiwall Carbon Nanotubes in Hydrothermal Fluids Numerical Models of the Effect of Heterogeneity on the Behavior of Graded Materials Effects of Chemically Doped Cu(11) Ion on the Current Density of Titania Thin Films Optimisation of Initial Shape of Functionally Graded Ceramic Pre-Forms for Near-Net-Shape Sintering The Preparation for Sintered Body of Ultra Fine Y2O3-Doped CeO2 Powders Using Colloidal Surface Chemistry TiN-Based Nanocrystalline Ceramics Microstructure Control of Silica Thin Film by Spin Coating Method Non-Oxide Ceramic Composites with Multilayered Interphase and Matrix for Improved Oxidation Resistance Rate-Controlled Synthesis and Sintering of Nanocrystalline Barium Titanate Powders Mixed (Oxygen Ion and n-Type) Conductivity and Structural Characterization of Stabilized Tetragonal Zirconia in the ZrO2-CeO2-TiO2 System Effect of Al-Addition on the V-I Characteristics of ZnO-Varistors Sintered at Low Temperature Elaboration of Porcelain Stoneware Tiles at 1170 DegreesC by Addition of Wollastonite Grain Boundary Issues in Porous Structural Ceramics The Effect of CeO2 on the Microstructure and Dielectric Properties of CaTiO3-Based Ceramics Microwave Dielectric Properties of Ba(6-3x)Pr(8+2x)Ti18O54 Ceramics Mineralogical Transformations of Ceramic Raw Materials Used in the Manufacturing of Tile Bodies

「Nielsen BookData」 より

詳細情報

• NII書誌ID(NCID): BA56073385
• ISBN:
  • 0878498826
• 出版国コード: sz
• タイトル言語コード: eng
• 本文言語コード: eng
• 出版地: Uetikon-Zuerich
• ページ数/冊数: 3 v. (liii, 2258 p.)
• 大きさ: 25 cm
• 親書誌ID:
  • BA1292205X