Bioceramics : proceedings of the 14th International Symposium on Ceramics in Medicine, the annual meeting of the International Society for Ceramics in Medicine : Bioceramics-14, Palm Springs, California, USA, 14-17th November 2001
著者
書誌事項
Bioceramics : proceedings of the 14th International Symposium on Ceramics in Medicine, the annual meeting of the International Society for Ceramics in Medicine : Bioceramics-14, Palm Springs, California, USA, 14-17th November 2001
（Key engineering materials, v. 218-220）
Trans Tech Pub., c2002
大学図書館所蔵 件 / 全3件
-
該当する所蔵館はありません
- すべての絞り込み条件を解除する
注記
Includes bibliographical references and indexes
内容説明・目次
内容説明
Bioceramics has evolved into a major field of study having important implications for humankind's future health and wellbeing.
Volume is indexed by Thomson Reuters CPCI-S (WoS).
The Bioceramics-14 monograph contains more than 160 papers with representations from over 20 countries. The topics range from totally inert, load-bearing materials, such as alumina, zirconia, silicon nitride and diamond to bioreactive materials such as calcium phosphates and bioglasses. The latter have great potential for aiding grafting, bone repair, drug-delivery, and implant-fixation to living tissues.
目次
- Preparation and Mechanical Characterization of Hydroxyapatite Monodispersed Macroporous Structure. Influence of Interconnection and Macropores Diameters Hydroxyapatite Formed on the Aligned Chitosan Prepared from Crab Tendon A New Method of Preparation of Calcium Phosphate Bioceramics Correlation between MgO Doping and Sintering Characteristics in Hydroxyapatite/ -Tricalcium Phosphate Composite Bioceramic Scaffold with Controlled Porous Structure for Bone Tissue Engineering Physico-Chemical and Thermal Properties of Chlor-, Fluor- and Hydroxyapatites Synthesis and Characterisation of Hydroxyapatite and Fluorapatite Biomimetic Apatite through a Self-Assembly Process A Compaction Route for Low Temperature Processing of Porous Calcium Polyphosphate Matrices Influence of Plasma Gas Composition on the Adhesiveness of RF Thermal Plasma Sprayed Hydroxyapatite/Titanium Composite Coatings Preparation and Characterization of Porous Titanium Atomic Force Microscopy as a Tool to Study In-Situ the In-Vitro Bioactivity of Starch Thermoplastic/Hydroxylapatite Biomaterials Hydroxyapatite Coatings by Electrophoretic Deposition on Blasted Titanium Sheets Preparation of Porous Apatite Material through Low Temperature Synthesis Apatite Induction on Titania due to Combined Chemical and Thermal Treatments of Titanium 31P Solution State NMR Investigation of the Hydrolysis of a New Alkoxide Sol-Gel Hydroxyapatite Ligand Substitution and Complex Formation in Hydroxyapatite Sol-Gel System Synthesis and Characterization of Silicon Substituted Hydroxyapatite Structural and Morphological Analysis of Functionally Graded Calcium Phosphate Bioceramic A Contribution to the Production and Characterization of New Biomedical Coatings: Fluorohydroxyapatite Coatings Importance of Including Proteins in Experimental Models Aimed at Studying Reactive Surface Apatite Layers on Calcium Phosphates An Equilibrium Study of Phosphate Precipitation on Bioactive Glass What Process Drives Bone Formation at Bone-Implant Interfaces? Effect of Poly L-Aspartic Acid on the Biomimetic Formation of Calcium Phosphate on Collagen Gel Apatite-Forming Ability and Mechanical Behavior of PTMO-Modified CaO-TiO2 Hybrids Prepared by Sol-Gel Processing Micropattern Formation of Apatite by Combination of Biomimetic Method and Transcription of Resist Pattern Apatite Forming Ability of Titanium Oxide Thin Film Synthesized from Aqueous Solution Apatite Deposition on Polyamide Films Containing Carboxyl Groups in Body Environment Coating of Bonelike Apatite on Polyamide Film via Chemical Modification with Calcium Salt In Vitro Evaluation on Bone-Bonding of Chemically Modified Titanium Acceleration of Bone-Like Crystal Growth on Polarized Plasma Sprayed HAP in SBF Biodegradation Study of Potassium Calcium Metaphosphate in the SBF and Tris-Buffer Solution In Vitro Evaluation of Highly Absorptive Ceramics Materials Needs Consideration of Calcium and Magnesium Ions Adsorbed to the Materials Proteins Modulate the Properties of Biomimetic Calcium Phosphate Coatings on Titanium Implants Physical and Mechanical Behavior of Zirconia-Hydroxyapatite Ceramics after Aging in Simulated Body Fluid Fluor-Hydroxyapatite Solid Solutions as Alternative Bioceramics Comparative Study of the Synthesis and Processing of Hydroxyapatite Synthesis of Carbonate-Hydroxy Apatite and Selective Adsorption Activity against Specific Pathogenic Substances Calcium Deficient Apatite: An In-Vitro Model for Vancomycin Controlled Release Fabrication and In-Vitro Biocompatibility of Zinc-Containing -Tricalcium Phosphate Laser Surface Cladding: A New Promising Technique to Produce Calcium Phosphate Coatings Bioactive Titanium: Effect of Sodium Removal on the Bone-Bonding Ability of Bioactive Titanium Prepared by Alkali and Heat Treatment Comparative Study between In Vivo Bone Ingrowth Behavior in Rabbits and In Vitro Apatite Forming Ability in Simulated Body Fluid Using Granules of P2O5-Free Na2O-CaO-SiO2 Glass System Mechanism of Accelerated Osteogenesis around Polarized Hydroxyapatite in the Bone Osteoconduction of Polarized Hydroxyapatite Plasma-Spray-Coating Titanium Enhanced In Vivo Response to Silicate-Substituted Hydroxyapatite Methods to Enhance Biomimetic Activity and Ability to Tissue Bonding of Sol-Gel-Derived Nanoporous Titania Coating of Hydroxyapatite Films on Ceria-Stabilized Tetragonal Zirconia by a Spray-Pyrolysis Technique and Its Evaluation of Biocompatibility by Osteoblastic Cells Resorption of Porous A-W Glass Ceramic LacZ Gene Transfer to Cultured Bone Marrow Cells with Hydroxyapatite Cultured Living Bone Equivalents Enhance Bone Formation when Compared to a Cell Seeding Approach Rapidly Resorbable and Spongiosa-Like Dicalcium Potassium Sodium Phosphate Glass-Ceramics for Three-Dimensional Cultivation of Human Osteoblast-Like Cells Zn Doped -Tricalcium Phosphate Addition into Apatite Cement further Enhance the Differentiation of Osteoblasts Quantitative Analysis of Bone Formed in Marrow/BMP/HA Composites Engineered RGD Peptide Surface Regulates Adhesion, Spreading and Cytoskeletal Organization of Osteoblast-Like Cells Manipulation of Cell Proliferation by Electrically Polarized Hydroxyapatite Allogenic Transplantation of Cultured Bone/Porous -TCP Materials Construct Dynamic Culture of Primary Chondrocytes on Porous -TCP and HA Scaffolds in Spinner Flasks: Effects of Pore Size and Cell Seeding Density In Vitro Proliferation of Human Fibroblasts on P(e-CL/DL-LA)/Bioactive Glass Composites Cytotoxicity of Calcium Metaphosphate Coated on cp-Titanium Study of Osteoblast Differentiation and Proliferation on the Surface of Binary Bioactive Gel-Glasses Improvement of the Stability and Mechanical Properties of Resorbable Phosphate Glasses by the Addition of TiO2 In Situ AFM Observation of Apatite Formation on Bioglass Colloidal Dimensions Versus Biodegradation and Calcium Phosphate Formation on Sol-Gel Derived Silica Fibers Synthesis of Sol-Gel Derived Bioactive Foams In-Situ AFM Study of the Mechanisms Involved on Calcium-Phosphate Film Formation on Partially Crystallized BioglassR and on Hydroxylapatite Immersed in a Simulated Body Fluid Bioactive Organic-Inorganic Composite Prepared by Mechano-Chemical Method The Effect of Temperature on the Processing and Properties of Macroporous Bioactive Glass Foams Concentration Dependence of Bioactive Glass Dissolution In Vitro In Vivo Tests of a Highly Porous Rapidly Resorbable Dicalcium Potassium Sodium Phosphate Glass-Ceramics Early Tissue Reaction around Implanted Biomaterials: Differences between b-TCP and PMMA Preparation of Thin Histological Sections for Bone Attachment and Implant Material Analysis In Vitro Primary Study of an Injectable and Fast Setting Calcium Phosphate Based Biomaterials Synthesis of Bioactive PMMA Bone Cement via Modification with Alkoxysilane and Calcium Salt
- Effect of Calcium Salt Comparison between Commercial Calcium Phosphate Bone Cements Influence of Air-Entraining Agent on Bone Cement Macroporosity Effects of Powder Phase Sterilization on Basic Properties of Apatite Cement Influences of Crystal Phases on Bioactivity of Calcium Phosphate Cements In Vitro Response of Osteoblast-Like Cells to Hydroxyapatite-Zinc Oxide-Poly(Acrylic Acid) Cements Effects of Tannic Acid in -Tricalcium Phophate Cement for the Physical Properties and Tissue Responses Interface Bioactive Bone Cement (IBBC) in Place of HA Coating: Merits and Demerits Mechanical Evaluation of Fixation of Titanium Implants in Trabecular Bone Using an Injectable Calcium Phosphate Cement Soft Tissue Response to Newly Developed Calcium Phosphate Cements Microstructure Analysis of Novel Resorbable Calcium Phophate/Sulphate Bone Cements Bone-Bonding Strength of Two Kinds of Polymethylmethacrylate-Based Bioactive Bone Cement Containing Bioactive Glass Beads or Glass-Ceramic Powder In-Vitro Edurance Testing of Bone Graft Materials for Impaction Grafting Mechanical Properties and Characterisation of Sol-Gel Coated Coralline Hydroxyapatite The In Vivo Response of Phase Pure Hydroxyapatite and Carbonate Substituted Hydroxyapaite Granules of Varying Size Ranges Regeneration of Bone and Bone Marrow by Constructs Grafting of Human Cultured Bone and Porous Ceratite Osteogenic Activity of FK506-Treated Cultured Bone Tissue Osteogenic Potential of Osteogenic Cell / Collagen Sponge Construct for Bioartificial Periosteum A New Sol-Gel Derived Bone Grafting Material Comparison of Osteosyntheses According to Compositions of Porous Calcium Phosphate Graft Segmental Bone Defect Repair Using Sintered, Porous Ceramics Synthesis and Properties of Ceramic Foams for Hard Tissue Repair In-Vitro Testing of Bonesave, a Ceramic Bone Graft Substitute for Use in Impaction Grafting Grafton (R) Demineralized Bone Matrix Combined with Cancellous Allograft as an Autogenous Graft Substitute in the Treatment of Fractures and Nonunions Histological Studies on Retrieved HA Granules Filled in Acetabular Massive Bone Defect in Revision Total Hip Arthroplasty In Vitro Bioactivity and Mechanical Performance of Tricalcium Phosphate/Polyhydroxybutyrate Composites Synthesis of a Bioactive Poly(Methyl Methacrylate)/Silica Hybird Apatite-Forming Ability and Mechanical Properties of Glass-Ceramic A-W-Polyethylene Composites Bi-Composite Sandwich Injection Moulding: A New Method of Producing Stiff and Strongly Bioactive Bone-Analogues Heating Effect on Properties of Organic-Inorganic Hybrids Containing Colloidal Silica Particles Cross-Linkage of Hydroxyapatite / Collagen Nano-Composite with 3 Different Reagents Preparation of a Bioactive Polycaprolactone/Silica Nanocomposite New Bioactive Composites Consisting of Partially Crystalized Glass Beads and PMMA: Evaluation of Osteconductivity Dentin Mineralization with a Bioactive Composite In Vivo and In Vitro Evaluation of the Biocompatibility of the Hydroxyapatite-PMMA Hybrid Materials Having Mechanical Property Similar to that of Cortical Bone Mechanical Behaviour of Polyethylene/Hydroxyapatite Bone-Analogue Composites Moulded with an Induced Anisotropy Clinical Application of the Plug Made of Porous AW Glass Ceramic for Revision Total Knee Arthroplasty Development and Improvement of Ceramic TKP for 19 Years and Clinical Results Design Rationale and Mid-Term Clinical Results of the Bisurface Knee Prosthesis Hydroxy Apatite Ceramic Hip Survey Ceramic on Ceramic Bearings Hydroxyapatite Coated Total Hip Prostheses: A Long-Term, Prospective, Randomized Study of 50 Consecutive Cases Hybrid Alumina-Alumina Hip Replacement in Patients under the Age of 55 Years Old Surface Analysis on Retrieved Ceramic Total Knee Prosthesis Lessons and Pitfalls from 27 Years Alumina Ceramic Experience in Vienna / Austria Clinical Wear and Simulator Study of Ceramic-Ceramic THR to 20 Years and Beyond Investigation of a Ceramic Head Retrieved after 20 Years: A Case Study Development of Zirconia Plasma Sprayed Coatings for Dental Implants and for Knee Prostheses Influence of Material Combinations and Lubricants on Friction and Wear in Ceramic-on-Ceramic Sliding Pairs for Joint Prostheses Effect of Frictional Heating on the Serum Lubricant and Wear of UHMWPE Cups against Cobalt-Chrome or Zirconia Balls Analysis of Contact Mechanics and Lubrication in Ceramic-on-Ceramic Hip Joint Replacements The Friction and Lubrication of Alumina-on-Alumina Total Hip Prostheses - The Effect of Radial Clearance and Wear Testing Long-Term Performance of a Transformation Toughened Platelet Reinforced Alumina Matrix Composite Nanotribological Characterisation of Alumina Femoral Heads Using an Atomic Force Microscope Crevice Corrosion of Titanium Alloyed Morse Tapers May Cause Fracture of Alumina Ceramic Heads Comparison of the Abrasive Wear Resistance between Amalgams, Hybrid Composite Material and Different Dental Cements High Load Bearing, High Reliable All-Ceramic Bridges Reliability of Zirconia Hip Joint Heads: Combination of Wear and Aging Tests A New Knee Prosthesis with Bisurface Femoral Component Made of Zirconia-Ceramic Tribological Characteristics of Diamond-Like Carbon Films Formed on CP Ti and ELI Ti-6Al-4V Mechanical Stress Analysis and Burst Testing of a Zirconia Femoral Component for Total Knee Arthroplasty New Approach to a Cementless Ceramic Component for Artificial Knee Joint Zirconia Ceramic Femoral Components Investigation of the Wear Behaviour of a Ceramic Knee Concept with Floating Meniscal Bearing Characterization of Steady-State Wear in All-Alumina THR to 20 MC Ceramic Wear Debris in Total Joint Replacements: Review of Debris Morphology and Biological Response Nano-Smooth Diamond Surfaces of Duplex Coatings on Titanium Alloy for Low Friction and Low Wear of Biomaterial Counterfaces Ceramized Articulating Surfaces of Metal-Metal Hip Joint Prosthesis CE-TZP/AL2O3 Nanocomposite for Total Joint Prostheses Creating Abrasive Conditions in Knee Simulator Tests of Oxidized Zirconium and Cobalt-Chrome Femorals The Ultrastructural Analysis of Heterotopic Osteogenesis in Porous Biphasic Calcium Phophate Ceramics Apatite-Forming Ability of Ethylene-Vinyl Alcohol Copolymer Modified with Ti-OH Groups Composition of Apatite Produced in Simulated Body Fluids Characterisation of Mono- and Biphasic Calcium Phosphates Granules Variation of Clusters in Simulated Body Fluids with Time Apatite-Forming Ability and Mechanical Properties of Polydimethylsiloxane (PDMS)-TiO2 Hybrid Treated with Hot Water Apatite-Forming Ability of Zirconia Gels with Different Structures Zeta-Potential Variation of Bioactive Titanium Metal during Apatite Formation on Its Surface in Simulated Body Fluid Preparation of Magnetite Microspheres for Hyperthermia of Cancer Process of Apatite Formation Induced by Anatase on Titanium Metal in Simulated Body Fluid Resorbable Calcium Phosphate Composite Coatings Tissue Response of Calcium Polyphosphate in Beagle Dog Extensive Biocompatibility of Electrically Polarized Partially-Stabilized-Zirconia Ceramics Quantitative Evaluation of Wear Property of Polyethylene-on-Ceramic Sliding Pairs for Joint Prostheses in Multidirectional Sliding Test Ceramic-on-Ceramic Bearing Surfaces: A Complete Solution to 3RD-Body Wear Problem in Total Hip Arthroplasty Long-Term Study of High-Strength Hydroxypatite/Poly(L-Lactide) Composite Rods for Internal Fixation of Bone Fractures: Histological Examination
「Nielsen BookData」 より