Aluminium alloys 2002 : their physical and mechanical properties : proceedings of the 8th International Conference ICAA8, Cambridge, UK, 2-5 July 2002
著者
書誌事項
Aluminium alloys 2002 : their physical and mechanical properties : proceedings of the 8th International Conference ICAA8, Cambridge, UK, 2-5 July 2002
(Materials science forum, v. 396-402)
Transtec Publications, c2002
- : set
- pt. 1
- pt. 2
- pt. 3
大学図書館所蔵 件 / 全4件
-
pt. 1501.4||396-1||0212110211256,
pt. 2501.4||396-2||0212110211257, pt. 3501.4||396-3||0212110211258 -
該当する所蔵館はありません
- すべての絞り込み条件を解除する
内容説明・目次
内容説明
Volume is indexed by Thomson Reuters CPCI-S (WoS).
This 3-volume set comprises the proceedings of the Eighth International Conference on Aluminium Alloys: Their Physical and Mechanical Properties. The papers present the latest viewpoints of the world's leading aluminium experts concerning the basic understanding, and application, of aluminium alloys. The proceedings cover a wide range of related topics and represent the views of both academia and industry.
目次
Aluminium in the Rail Transportation Market
Current & Future Challenges for Aluminium as a Packaging Material
Structural Use of Aluminium in the Construction Industry
The Intelligent Design of High Strength, Creep-Resistant Aluminum Alloys
A Texture Component Crystal Plasticity Finite Element Method for Physically-Based Metal Forming Simulations Including Texture Update
The Effect of Ti on Grain Refinement in Al-Sc Alloys
Studies on the Sedimentation and Agglomeration Behavior of Al-Ti-B and Al-Ti-C Grain Refiners
The Variable Potency of TiB2 Nucleant Particles in the Grain Refinement of Aluminium by Al-Ti-B Additions
Hot Tearing during the Start-Up Phase of DC Cast Extrusion Billets
Upstream Fluid Flow Effects in Aluminium DC Casting
Prediction of Internal Crack in High Strength Al-Mg-Si Alloy
Effects of Ultrasonic (Cavitation) Melt Processing on the Structure Refinement and Property Improvement of Cast and Worked Aluminum Alloys
High Speed Twin Roll Casters for Aluminum Alloy Strips
Defect Formation in Twin Roll-Cast AA 3xxx and 5xxx Series Aluminium Alloys
Strip Casting and Processing of Al-Mg Alloys for Automotive Structural Applications
Microstructure Evolution and Mechanical Anisotropy of Strip Cast and Direct Chill Cast AA5182 Aluminum Alloy
Intermetallic Phase Selection during Solidification of Al-Fe-Si(-Mg) Alloys
Refinement of Recrystallized Grain Structure in Al-Mn-Mg Alloy Sheets via Strip Casting
Influence of Plasma Arc Melting on Melt Structure and Solidification Microstructure of Al-16 wt.% Si Alloy
Influence of Recycling Scrap Content and Solid Fraction on the Mechanical Properties of the New Rheocast Alloy A356
Thixoforming of Normally Wrought Aluminium Alloys
Effect of Mechanical Vibration on Semi-Continuous Casting of a Hypereutectic A390 Aluminum Alloy
Semisolid Casting of AlSi7Mg0.35 Alloy Produced by Low-Temperature Pouring
Silicon Spheroidization Treatment of Thixoformed Al-Si-Mg Alloys
Influence of the Microstructure on the Shearing Behaviour of Al4.5wt%Cu Alloy in the Mushy State
Aluminum Based Materials Containing Low Melting and High Melting Metals Produced by Mechanical Alloying with Addition of Metal Oxides
Role and Distribution of Strontium during the Dissolving and Grain Refining Process of AlSi7Mg Alloy's Structure
Interaction between Rare Earth and Hydrogen in Eutectic Al-Cu Melt
Micro-Mechanical Model of Hot Tearing at Triple Junctions in DC Casting
Modelling the Processing of Aluminium Alloys in the Semi-Solid State
As-Cast Microstructure in VDC Cast AA 6082 Billet
Change Fluidity of 1151 Alloy (Al-Cu-Mg) on Introducing of Co instead of Mn
Continuous Casting of Semisolid Aluminium Alloys
Simulation of the Casting and Homogenization of Two 6xxx Series Alloys
Effect of Atomizing Gas Pressure on Spray Formed 7075 Alloy
Mechanics and Dynamics Research of the Aluminum Melt Purification by FI Process
Microstructures and Modification Performance of Al- 10 Sr Alloy Prepared by Molten Salts Electrolysis and Direct Mixing Process
Reaction Processes in Aluminium Matrix Composites Produced by Low-Pressure Infiltration
The Study of the Interaction at Interfaces in MMCp and MMCf Composite Materials Based on the Aluminium Alloys with SiC
Effect of Sc Addition on Rapidly Solidified Al-Transition Metal Alloys
Foaming of Compacted Al-TiH2 Powder Mixtures
Latent Heat Evolution from TiB2 Particulate Reinforced Aluminium Alloys
A New Shear Method for Testing Aluminum Alloys in the Mushy State
Synthesis of TiC/Aluminum Composite by Reactive Infiltration Process
Microstructure of Mechanically Stirred Al-5%Cu Alloy Billet
Effectiveness of Reinforcement Incorporation and Mechanical Properties of Composites Produced from Rheocast Slurries
MMC Production Method Using Dynamic Consolidation of Mechanically Alloyed Aluminum and Silicon Carbide Powders
Recrystallisation Behaviour a Commercial Pure and AlMn Aluminium Alloy after Cyclic and Monotonic Torsion
Strain Path Effects on Texture Development in Aluminium
Control of Through-Thickness Shear Texture by Asymmetric Rolling
Modelling the Evolution of Microstructure and Properties during Deformation of Aluminium
Control of Microstructures and Textures in High Purity Al for Advanced, High Efficiency Electrolytic Capacitor
Microstructural Control of an Al-Mg-Si Alloy Using Equal-Channel Angular Pressing
The Physical Metallurgy of Recrystallization and Grain Growth in Non-Hardenable Aluminum Alloys
On the Correlation of Texture and Ridging in AA6016 Automotive Alloys
The Influence of Homogenisation Heat Treatment on Microstructure Development in Al-Mg-Mn Alloy AA5454
Evolution of Cube Texture in AA3103 during Hot Deformation - Simulation Assisted Analysis
Texture Gradient Simulations and Measurements in Hot Rolled and Extruded High Strength Aluminium Alloys
Material Testing, Constitutive Modeling and Implementation of Material Models into Hot Rolling Models for Alloy AA3103
Integral Modelling of Texture Evolution in Multiple Pass Hot Rolling of Aluminium Alloys
Extrusion Modeling of Solute, Eutectic and Precipitation Al Alloys
Homogenization and Hot Workability of Alloy AA2014
Influence of Cooling after Homogenisation and Reheating to Extrusion on Extrudability and Final Properties of AA 6063 and AA6082 Alloys
The Influence of Homogenisation Cooling Rate, Billet Preheating Temperature and Die Geometry on the T5- Properties for Three 6XXX Alloys Extruded under Industrial Conditions
An In-Situ Study of Substructural Evolution in a Single-Phase Aluminium Alloy
Sharpening of Cube Texture in High Purity Aluminum Foil by Two Step Partial Annealing and Light Rolling
Change in Microstructure during Annealing of Ultrafine Grained Aluminum Produced by ARB
Grain Refinement and Texture Evolution during the Deformation of Al to Ultra-High Strains by Accumulative Roll Bonding (ARB)
Effect of Heat-Treatment in Different Environments on Surface Segregation Phenomena of Lead in Aluminum-100 ppm Lead Alloy
The Shear Strain Measurement and Finite Element Modeling during Equal Channel Angular Pressing of Aluminum
Evolution of Texture and Microstructure during Repeated Shear Deformation in Aluminum 1100 Alloy Sheets
Effect of Mn Replacement with Co on Hot-Shortness of 1151 Alloy (Al-Cu-Mg) under Preservation of Small Additions of Transition Metals
Changes in Fe and Si Solute Levels during Deformation of AA1200
Texture Evolution of an AA3xxx Alloy after Different Homogenisation Treatments
The Effect of Precipitation on the Recrystallization Behavior of a Supersaturated, Cold Rolled AA3103 Aluminium Alloy
Evolution of Texture and Microstructure in AA3004 Sheets during Continuous Confined Strip Shearing Deformation and Subsequent Annealing
Hot Workability in Torsion of Al-Si-Cu-Ni-Sr Alloy
Comparison of Recrystallisation Behaviour of AA5052 after Hot Deformation in Reversed Torsion and in Compression/Tension
The Influence of Copper and Silicon Additions on the Extrudability and Mechanical Properties of a Series of Aluminium Alloys Based on AA6111
Grain Refinement of AA7475 Based Aluminum Alloy Sheets by a Warm Rolling with Heated Rolls and its Effect on Texture and Mechanical Properties
Isothermal Forging Modelling of Aluminium Based Metal Matrix Composites
Controlling Inside Diameter of Circular Tube by Extrusion
Microstructural Modelling of a Commercially Processed 6xxx Series Aluminium Alloy
Recovery and Recrystallization Behaviour of AlMn1 - Alloys
The Influence of Grain Orientation on Recrystallization in Hot-Deformed Al-2.5%Mg (AA5052)
Recrystallisation Processes in Aluminium Revealed by Gallium Treatment
Modelling the Variation in Recrystallized Fraction through the Thickness of AA7050 Plate
The Effect of Initial Grain Size on Transition from Discontinuous to Continuous Recrystallization in a Highly Cold Rolled Al-Fe-Mn Alloy
Inhomogeneous Warm Rolling and Annealing of AA3104: Shear Texture Development and Thermal Stability
Highly Recrystallization Resistant Al-Mn-Mg Alloys Using Sc and Zr
Influence of Partial Annealing Temperature on Cube Texture in High Purity Aluminum Foils
Recrystallization Kinetics in AA1200 Alloys with Different Concentrations of Fe, Si and Ti in Solid Solution
Influence of Continuous and Discontinuous Recrystallization on the Properties of Cold-Rolled Sheets from Aluminium Alloys
Orientation Imaging Microscopy of the Shear Bands Formed in Al-5%Mg Alloys during Cold Rolling
A New Representation of Grain Boundary Properties
Development of New Damage Tolerant Alloys for Age-Forming
Evaluation of the Effect of Cu on the Paint Bake Response of Preaged AA6xxx
Precipitation Processes in Al-4Cu-(Mg, Cd) (wt. %) Alloys
An Investigation of Dilute Al-Sc-Si Alloys
Development of Near-Eutectic Al-Si Casting Alloys for Piston Applications
Characteristics of ' and 4 Precipitates in Ag-Modified Al-Zn-Mg Alloys
A Statistical Model for Precipitation - Applications to Commercial Al-Mn-Mg-Fe-Si Alloys
Advanced Statistical Modelling of Processing of Aluminium Alloys
Atomistic Behavior of Microalloying Elements in Phase Decomposition of Al Based Alloys
The Effect of Homogenizing on the Quench Sensitivity of 6082
Micro-Macro Modelling of Microstructure and Microporosity in Al-Si-Cu Alloys
Analysis of the Intermetallic Phase Transformation Occurring during Homogenization of 6xxx Aluminum Alloys
DSC Study on Mg-Si Phases in As Cast AA6xxx
Study of Intermetallic Phase Transformations in 3xxx Alloys Using Diffusion Couples
Dispersoid Evolution during Homogenization of 6xxx Alloys
An Atom Probe Study of Fine Scale Structure in AlMgSi(Cu) Alloys
The Role of Trace Additions on the T1 Coarsening Behavior in Al-Li-Cu-X Alloys
Isothermal and Non-Isothermal Devitrification Phase Transformations in Al-Ni-Gd Metallic Glasses
Microstructure Evolution of Twin-Roll Cast AA5xxx Alloys during Homogenisation-Like Annealing
Application of Thermodynamic Calculation to the Aluminium Alloy Design for Semi-Solid Metal Processing
Processing, Structure and Mechanical Behavior of Rapidly Solidified Aluminum Alloys Containing Quasicrystalline Particles
Design of New Cast Aluminium Materials Using Properties of Monovariant Eutectic Transformation L -Al + Mg2Si
Recovery Associated with Cell Structure Evolution in an Al-0.53wt%Cu-1.0wt%Si Alloy at Low Temperatures
Sc in Aluminum Alloys
Modeling of Precipitation Coupled with Thermodynamic Calculations
Local Structure of Al-Sr Modifier in Liquid Al-Si Alloys
The Effect of Small Scandium Additions to AA7050 on the As-Cast and Homogenized Microstructure
Structural State and Decomposition Kinetics in Rapidly Quenched Al - Sc, Al-Mg-Sc Alloys
Early Decomposition Stages in two Al-Cu-Mg Alloys
Mechanisms of Age-Hardening in two Al-Cu-Mg Alloys Studied by Positron Annihilation Spectroscopy
Secondary Ageing in an Al-Cu-Mg Alloy with High Cu/Mg Ratio
On the Role of Tin in Promoting Nucleation of the 'Phase in Al-Cu-Sn
Effects of Quenched-in Excess Vacancies and Microalloying Elements on Phase Decomposition of Al-Cu-Alloys
The Effect of Cold Work on the Precipitation of and ' in a Ternary Al-Cu-Mg Alloy
A Microstructural Study of an Al-Cu-Mg-Zr Alloy after Hot Forming
Structures and Transformations during Artificial Aging of an Industrial 7xxx-Series Al-Zn-Mg-Zr Alloy
Mechanisms of Phase Transformations under Ageing in the Alloys of Al-Zn-Mg-(Cu) System
Precipitates in a Li-Containing Al8.4Zn1.35Mg1.76Cu (wt. %) Alloy
Influence of Small Additions of Ag on the Ageing Kinetics of an Al-Zn-Mg Alloy: A Positron Annihilation Study
Evaluation of Sc-Bearing Aluminum Alloy C557 for Aerospace Applications
High Resolution Transmission Electron Microscopy Study of the Early Stages of Aging in Al-Mg-Cu Alloys
Study of the Influence of a Low Copper Addition and of an Excess of Silicon on the Precipitation Kinetics and on the Precipitation Sequence of Al-Mg2Si Alloys
Precipitation in Al-Mg-Si Alloys with Cu Additions and the Role of the Q' and Related Phases
As-Cast Ageing of Aluminum Alloys
An Approach for Continuous Cooling Transformation (CCT) Diagrams of Aluminium Alloys
Precipitation of Dispersoids in DC-Cast 3003 Alloy
Analysis of 'Precipitation in Al-Li Alloys
HRTEM Observation of Interface on GP Zones in Al-Ag Alloys
Control of Secondary Precipitation to Improve the Performance of Aluminium Alloys
GeSi Precipitation during Early Stages of Aging of a Ternary Al-Ge-Si Alloy
Clustering and Precipitation in Al-Si-Ge and Al-Si-Ge-Cu Alloys
EFTEM Observation for Nano-scaled Precipitates in Aluminum Alloys
Hardening and Precipitation in the Al-Cu-Mg-Si Alloying System
Precipitation in Stretched Al-Cu-Mg Alloys with Reduced Alloying Content Studied by DSC, TEM and Atom Probe
The Al-Cu-Fe-Mg-Si Phase Diagram in the Range of Al-Cu Alloys
The Effect of Nickel on the Structure, Mechanical and Casting Properties of Aluminium Alloy of 7075 Type
Effect of Addition of Copper and Chromium on Precipitation in Al-Mg-Si Alloys
EFTEM Observation of Q' Phase in Al-Mg-Si-Cu Alloy
HRTEM Observation of Precipitates in Al-Mg-Si Alloy Containing Copper at Early Stage during Aging
TEM Observation of Interface in Al2O3 Particle Dispersed Al-Mg-Si Alloy Composite Materials
Effect of Be on Phase Transformations in an A357-AlSiMg Alloy
Quench Path Sensitivity of Super Purity AL-0.8%MG2Si Alloys with and without Excess Silicon
Coherent Composite Phases Formation in Aged Al-Li Base Alloys
Influence of the Ageing Realization Scheme on the Phase Transformations and Properties of Commercial Aluminium Alloys
Mechanism of '-Phase Formation in Al-Li and Al-Li-Mg Systems Alloys
Influence of Zn and Sn on the GP Zones Formation and the ' Metastable Phase Precipitation in Al-Ag-Sn(Zn) Alloys
Yield Shear Stress Anisotropy of Al-Cu Single Crystal Containing Single Variant GP Zones
Effect of Mg Additions on the Work Hardening Behavior of Aluminum over a Wide Range of Strain
The Effect of Precipitation State on the Plastic Deformation Behaviour of AA6111 Aluminum Alloy
An Approach of Precipitate/Dislocation Interaction in Age-Hardened Al-Mg-Si Alloys: Measurement of the Strain Field around Precipitates and Related Simulation of the Dislocation Propagation
A Study of the Hardening Precipitation in a 2650 Aluminium Alloy for Aeronautics
The Ageing and Thermal Recovery Behaviour of Al-Mg-Cu Alloys
Microstructural Evolution and Hardening during Controlled Thermal Processing of Al-Cu-Mg Alloys
High Resolution Transmission Electron Microscopy Study of the Early Stages of Aging in Al-Mg-Cu Alloys
Effect of Heat Treatment on Yield Point Elongation and P-L Effect in 5182 Al-Mg Alloys
Effects of Texture and Arrangements of Dislocation Cell Walls on Yield Stress Anisotropy in Cold Rolled and Recovery Annealed Al-Mg Alloy Sheets
Diffusion in Fine-Grained Al Alloys Having Low and High Angle Grain Boundaries
Effect of Changing Homogenisation Treatment for the Alloys AA3102 and AA3103
Effect of Indentation Size on Plastic Deformation Processes in an Ultrafine-Grained Al-3% Mg Alloy
Plastic Instabilities during Biaxial Testing of Al-Fe-Si Foils
Microstructure and Plastic Anisotropy in Rolled AA1200
Elastic-Plastic Characterisation of Aluminium Bearing Alloys
In-Situ Strengths of Various Coarse Intermetallic Particles in Wrought Aluminum Alloys
Investigation on Mechanical Anisotropy of Strip Cast (SC) Aluminum Alloy AA5182
Study of the Nanoscale Precipitation in 6056 Alloy (AlMgSi) by Conventional Transmission Electron Microscopy and TEM In-Situ Straining Experiments
Influence of Precipitate Free Zones on the Test Direction Dependence of Mechanical Properties of High Strength Aluminum Alloys
The Effect of Varying the Solution Treatment Temperature, Natural Aging Treatment and Artificial Aging Treatment on the Mechanical Strength of 7249 Aluminum Alloy
Low Temperature Mechanical Properties of Scandium-Modified Al-Zn-Mg-Cu Alloys
Influence of High Velocity Spraying Conditions on the Microstructure and Properties of an Al-12wt%Sn-1wt%Cu Alloys
Effect of Reinforcement Distribution on Failure Mechanism in Aluminum Based Metal Matrix Composites
Characterisation and Modelling of Work Hardening in Al-Mg and Al-Mn Alloys
Coherency between Al3Sc Precipitate and the Matrix in Al Alloys Containing Sc
On the Effect of Thermomechanical Processing on the Mechanical Properties of 2297 Plates
Microstructure Evolution and Hardening Behavior of 2024 Aluminum Alloy Processed by the Severe Plastic Deformation
TTT and TTP Ageing Diagrams of Commercial Aluminium Alloys and Their Use for Ageing Acceleration and Properties Improvement
High-Pressure Gas Quenching during Age Hardening of Aluminium Alloys
Diffusive Paths in 6013 (AD37) Alloy under a Single and Double Ageing
Change in the Uniform Elongation and n-Value of 6061 Aluminum Alloy Sheets during Isothermal Strain Aging
Effects of Alloy Composition and Quenching Rate on the Bendability in Al-Mg-Si Alloys
Influence of the Initial Ageing Condition on Microstructure and Properties of a Friction Stir Welded 6056 Alloy
Effects of Sn Addition on Microstructure, Extrudability, Mechanical Properties and Machinability of a 6082 Alloy
Influence of Aging Conditions on the Microstructure and Tensile Strength of Aluminium alloy 6063
Microstructure and Mechanical Properties of Cast and Wrought Al-Zn-Mg-Cu Alloys Modified with Zr and Sc
Properties and Rapidly Solidified Powder Alloys of the Al-Zn-Mg System
Preliminary Research of a Li-Containing Al-Zn-Mg-Cu Alloy
On the Residual Stress Control in Aluminum Alloy 7050
Mechanical Inhomogeneity of Extruded Al-Li Based Profiles
Mechanical and Thermophysical Properties of Graphite/Al Composites Produced by Casting Infiltration Methods
Fatigue and Fracture of Al-Si-Mg Cast Alloys Produced by Conventional and Semi-Liquid Processes
Elevated Temperature Fatigue of Al-Si Piston Alloys
Effects of Damage at Eutectic and Primary Si Particles in Cast Al-Si Alloys
Influence of Environment and Load Frequency on Fatigue Crack Propagation of 1424 Al-Mg-Li Alloy
Orientation Dependence of the High Cycle Fatigue Properties in a Hot-Cross Rolled Al-Li 8090 Alloy Plate
Corrosion-Fatigue Interactions for High Strength Aluminium Alloys
On the Effect of Combined Thermal and Mechanical Loading on the Microstructural Evolution of an Al-Mg-Li Alloy
The Influence of Microstructure and Manganese Content in Solid Solution on the Creep Behavior of AA3003 Extrusion
Back Flow Creep Phenomena in Short Fibre Reinforced Aluminium Alloys
Creep and Creep Fracture of 7010-T7351
A Fracture Mechanics-Based Approach to Estimating the Fracture Stress and Strain of Cast Al-7%Si-0.3%Mg Alloys
Stress Triaxiality Dimple Fracture Morphology and Fractal Dimension Relations for Several Aluminum Alloys
Effect of Local Melting on the HAZ Toughness of GMA Welded AA6082 and AA6005 Extrusions Containing Cu
Modelling of Fracture Toughness in High Strength 7xxx Aluminium Alloys
Fracture Behaviour of 2195-T8 Aluminium Alloy Plates
Effect of Microstructure on the Cracking Resistance Characteristics of Al-Zn-Mg-Cu-Zr (1933) Wrought High-Strength Alloy
Experimental Investigations of Fatigue Characteristics of AC4CH Cast Aluminum Alloys Fabricated through Rheocast and Squeeze Cast Methods
Structure Change Near Grain Boundaries Resulting from Aging-Treatment and its Effect on Fatigue Strength of an Al-1.2%Si Alloy
Ageing and Fatigue Behaviour in Cast Aluminium Alloys
Influence of Precipitate Microstructures on Thermal Fatigue Properties of Al-Si-Mg Cast Alloys
High Temperature Deformation of Al-Mg and Al-Mg-Sc Alloys
Dislocation Mechanisms Involved in a 150 DegreesC Creep Test of an Al(CuMg) Aluminium Alloy
Long Term Exposure of Aluminium-Lithium Alloys at Low Temperatures
Phase Transformation during Long-Term Low Temperature Exposure of 1424 Al-Li-Mg Alloy
Toughness Level of 6061 Aluminum Alloy Added with Mn Instead of Cr
Acoustic Emission Behavior during Tensile Deformation and Fracture of Al-Mg-Si Base Alloys
The Fractal Dimension-Dependence of Crack Size Tolerance Index of 7000-Series Aluminum Alloys
The Influence of Processing and Microstructural Parameters on the Exfoliation Corrosion Susceptibility of 2025
Electrochemical Characterisation of the Corrosion Properties of Aluminium Brazing Sheet
Hydrogen Induced Degradation in Precipitation-Hardened Aluminum Alloys
Stress Corrosion Cracking of Sensitized AA5083 (Al-4.5Mg-1.0Mn)
Optimum Trace Copper Levels for SCC Resistance in a Zn-Modified Al-5083 Alloy
Chemical Composition Profiles across Grain Boundaries in T6, T79 and T76 Tempered AA7449 Alloy
Evaluation of Stress Corrosion Resistance and Corrosion Fatigue Fracture Behavior of Ultra-High-Strength P/M Al-Zn-Mg Alloy
Ultra-Fine Grain Sized Mechanically Alloyed Surface Layers on Aluminium Alloys
Phase Stability in Wear-Induced Supersaturated Al-Ti Solid Solution
Sliding Wear Behaviour of Novel AA2124 Aluminium Alloy/Ni3Al Composites
Study of the Intergranular Corrosion Mechanism of the Aluminum Alloys with Electrochemical Method
Microstructure Dependence of Grain Boundary Corrosion in Oriented Aluminum Bicrystals
Electrochemical Characterization of Copper-Bearing Intermetallic Compounds and Localized Corrosion of Al-Cu-Mg-Mn Alloy 2024
Effect of Ageing Treatment on Mechanical and Corrosion Properties of 7075 Aluminum Alloy
Corrosion Behaviour of Al Fins in Heat Exchangers
Corrosion Behavior of Aluminum Finstock Alloys
Relationship between Hardness and Abrasive Wear for some Aluminium Alloys
Optimum Welding Condition of 2017 Aluminum Similar Alloy Friction Welded Joints
Friction Stir Welding of Al-Cu-Mg-Ag Alloys
A Thermomechanical Analysis of the Friction Stir Welding Process
Friction Based Welding Technology for Aluminium
The Stability of the Nugget Zone Grain Structure in AA7010 Alloy Friction Stir Welds during Solution Treatment
Microstructural Features of Fusion Welded 2024-T351
Precipitate Microstructure in the Heat-Affected Zone of Al-Zn-Mg MIG-Welds and Evolution during Post-Welding Heat Treatments
Microstructural Study of Laser Welds Al6056-AS12 in Relation with Hot Tearing
Spot Impact Welding of Sheet Aluminum
Flux-Free Diffusion Brazing of Aluminium-Based Materials Using Gallium (Patent Application: UK 0128623.6)
Mechanisms of Erosion during Brazing of Aluminium Alloys
Alloy 6022-T4E29 for Automotive Sheet Applications
Influence of Machining on Residual Stresses and Properties of Superhigh Strength B96 Thin Elements
Recovery Prediction for Cold Rolled Can Body Stock
Permanent Aluminium Foam Cores in Castings: Casting Processes and Fabrication Conditions of Foam Filled Parts
The Characterization of Cerium Conversion Coatings Deposited on Porous Film of Anodized Aluminum by Cathodic Polarization
Assessing Formability of Sheet Metals through Advanced Tensile and Laser Speckle Analysis
Simulation for Hemming of Aluminum Sheet Metal
Effects of Forming Conditions on Parallel Spinning for Circular Aluminum Tube
Aluminium Alloys on the Basis of Al-Cu-Mg, Lead-Free, Intended for Cutting
Formability of Twin Roll Cast AA 5xxx Alloy Sheet for Automotive Applications
Hollow Structural Members of Superplastic Aluminium Alloy by RB/SPF
Low Distortion Quenching of Aluminium Alloys in Polymer Medium
Influence of Trace Addition of Ag on the Weldability of Al-Zn-Mg-Cu-Zr Base 7010 Alloy
Fatigue of Friction Stir Welded 2024-T351 Aluminium Alloy
Strength, Corrosion and Environmentally Assisted Cracking of a 7075-T6 Friction Stir Weld
Tensile Strength and Fatigue Strength of 6061 Aluminum Alloy Friction Welded Joints
Nd: YAG Laser Beam Welding of 6013 Aluminium Alloy Sheet Using Different Filler Powders
Diffusion Modelling in Brazed Aluminium Alloy Components
Role of Lubricant Applying Effect in Lubrication in Aluminum Cutting
Selecting of Aluminium Casting Alloys for Plasmochemical Ceramic Coatings
A New Type of Ce-Mo Based Conversion Coatings for Aluminum Alloys
Advances in Industrial Aluminium Research and Development
Research on Rare Earth in Aluminum
「Nielsen BookData」 より