ECRS 6 : proceedings of the 6th European Conference on Residual Stresses, Coimbra, Portugal, 10-12 July, 2002
著者
書誌事項
ECRS 6 : proceedings of the 6th European Conference on Residual Stresses, Coimbra, Portugal, 10-12 July, 2002
(Materials science forum, v. 404-407)
Trans Tech Publications, c2002
大学図書館所蔵 件 / 全2件
-
該当する所蔵館はありません
- すべての絞り込み条件を解除する
内容説明・目次
内容説明
Volume is indexed by Thomson Reuters CPCI-S (WoS).
The field of Residual Stresses is a very large one and is also highly interdisciplinary in nature with regard both to its applications and to its scientific and technological fundamentals. The highly successful aim of this Conference (ECRS6) was to bring together researchers and practicing engineers, academics and students from all of the European Community members; as well as guests from overseas.
目次
Residual Strain Measurement by Synchrotron Diffraction
Problems Related to Energy-Dispersive X-Ray Stress Analysis Performed in Reflection Geometry
Global X-Ray Method for the Determination of Stress Profiles
The Influence of Surface Roughness on the Refraction Correction of Bragg Peak Positions
Application of Non-linear Sin2 Method for Stress Determination Using X-Ray Diffraction
Assumptions in Thin Film Residual Stress Methods
Residual Stresses Near Holes in Tempered Glass Plates
Residual Stresses in Bulk Metallic Glasses - I: Modeling
Modelling of the Relaxation Behaviour of Carbide-Hardened Superalloys
Characterization of Machining Distortion by Strain Energy Density and Stress Range
Modelling the Distribution of Lattice Strains Following Plastic Deformation of a Polycrystal. Application to Aluminum AA 7075 T6.
Residual Stresses in Green Bodies of Steel Powder after Conventional and High Speed Compaction
Residual Stress Measurements of Laser Peened Steels by Using Synchrotron Radiation
Generation of Extremely High Stress Levels in a TiAl Based Alloy
The Effects of Process Variations on Residual Stress Induced by Laser Peening
Strengthening of Ceramics by Shot Peening
Stress and Texture Analysis with Two-Dimensional X-Ray Diffraction
Dynamic In-Situ Investigation of the Texture and Strain State within a Plastically Deformed Solid AlMg3 Torsion Sample Using High Energy Synchrotron Radiation
MAXIM - A Novel Method for the X-Ray Imaging of Strain
Self-Consistent Calculation of the X-Ray Elastic Constants of Polycrystalline Materials for Arbitrary Crystal Symmetry
Dislocation Microstructures Identification by X-Ray Diffraction-Line Broadening Analysis
Finite Element Simulation of Residual Stresses in Epitaxial Layers
Calculation of the Influence of the Weld Pattern on the Final Residual Stress State and Deformation
Influence of Shots' Material on Shot Peening, a Finite Element Model
Residual Stress after EDM - FEM Study and Measurement Results
Graphitisation Model of Spheroidal Graphite Cast Iron Taking into Account Stress/Diffusion Coupling
Residual Stresses in a Nickel-Based Superalloy Introduced by Turning
Characterisation of the Effects of Grinding on Residual Stresses
X-Ray Diffraction Measurement of the Residual Stresses Surrounding a Cold Expanded Hole
Residual Stresses in Case Hardened Automotive Steel Gears
Determination of Residual Stresses in Carburized, Quenched and Tempered AISI 8620 Steel
Residual Stress Determination in Cold Drawn Steel Wire by FEM Simulation and X-Ray Diffraction
Residual Stresses in Welded Joints - Sources and Consequences
Simulation of Evolution of the Residual Stress in the Surface Layer under Tension and Torsion
Stresses, Residual Stresses and Distortions Developing during Brazing of Cemented Carbide and Steel Joints with Cylindrical Geometry
Removing of Residual Stresses in Isotropic Thin Shells by Heating
Residual Stresses in the Bodies Made of Low Alloy Steels
Study of Residual Stresses in Complex Parts by Experimental and Numerical Methods
Residual Stresses in Bulk Metallic Glasses - II: Measurement
A Device for Determination of Residual Stresses in Galvanic Coatings from the Measured Longitudinal Deformation of a Strip Substrate
Microstresses in Surface Treated Materials
The Orientation Dependence of Crystallite Stresses in a Deformed Alloyed Steel and a Rolled Two-Phase Brass
Elastoplastic Self-Consistent Modelisation of Internal Stresses in Rolled Zr702
Investigation of Stresses in Superalloys by Analysis of / '-Microstructure
Analysis of Depth Profiles of Residual Stress Using Synchrotron Radiation
The Use of Dispersive Double Crystal Monochromator - A Way for High-Resolution Powder Diffractometry
Advantageous Use of Glass Capillaries as Primary Optics for X-Ray Residual Stress Analyses and a Novel Concept for "Micro Diffraction" Stress Analysis
Determination of Crystal Lattice Parameters by the Maximum Entropy Technique
The Influence of the Macroscopic Surface Topography on Spatially Resolved Residual Stress Measurements
Error Minimisation in Stress Measurement by Rational Choice of Measurement Positions
Advanced Strain Analysis by High Energy Synchrotron X-Ray Diffraction
Synchrotron Evaluation of Residual Stress in Palladium Alloy Substrate
High-Energy X-Ray Synchrotron Radiation Analysis of Residual-Stress Distribution of Shot-Peened Steel
About the Effect of Residual Stresses on Microhardness Readings
The Magnitude of Heat Treatment Induced Residual Stresses and the Thermal Stress Relief of Aluminium Alloys
Residual Stress Measurement and Verification of Quenched Steel Based on Neutron Diffraction Method
Residual Stress Effects on Mechanical Properties of a Two Phase TiAl-Based Intermetallic Alloy
Percolation Properties of Internal Wetted Polycrystals: Effect of Stresses and Material Structure
Comparison of Residual Stress Depth Profiles in Welded Joints
Residual Stress Distribution in Butt Welded Joints - Effect of the Weld Groove Shape
Vibratory Stress Relieving Treatment of Welded Steel Components Studied by Barkhausen Noise Method and X-Ray Diffraction
Residual Stress Measurements Using Neutron Diffraction in Magnesium Alloy Laser Welded Joints
Optimisation of the Laser Surface Remelting Process on Strain and Residual Stress Criteria
Ferroelastic Behavior of PZT-Based Ferroelectric Ceramics
Residual and Applied Stresses in Plasma Sprayed Cr2O3 Coatings
X-Ray Diffraction Residual Stress Analyses on a Copper Coating Realized by Inert Plasma Spray
Elastic Constants of LPPS Stabilized-Zirconia Coatings
Strain Measurement during Laser Surface Cladding of Low-Carbon Steel and Analysis of Residual Stresses
Stress Relaxation on Biaxial Low Cycle Fatigue
Fatigue Damage Mechanism and Stress Relaxation in Shot Peened and Polished Nickel Base Materials
Effects of Mechanical Surface Treatment on Fatigue Failure in Ti-6Al-4V: Role of Residual Stresses and Foreign-Object Damage
Improvement of the Fatigue Behaviour of an Automotive Part Using a New Mechanical Treatment
Residual Stress Stability and Alternating Bending Strength of AISI 4140 after Shot Peening and Successive Annealing
Influence of Crystalline Orientation on the Distribution of the Load Stress in Coarse Grains
Individual Grain Analysis during Martensitic Transformation in a Polycrystalline Shape Memory Alloy: Relation between Stresses and Microstructure
Stress Induced Martensitic Transformation Studied by Neutron Diffraction
Stress Distribution in unstable Austenitic Steel
Neutron Diffraction Study of Plasticity-Induced Martensite Formation of the Austenitic Stainless Steel AISI 321
A Summary of Past Contributions on Residual Stresses
Near-Surface Stress Measurement in 2D and 3D by the Cut Compliance Technique
Mapping Residual Stresses after Foreign Object Damage Using the Contour Method
Measurement of the Residual Stresses around a Cold Expanded Hole in an EN8 Steel Plate Using the Contour Method
In-Situ Analysis of Microstress and Texture Development during Tensile Deformation of MMCs at Room Temperature and at Elevated Temperatures Using Synchrotron Radiation
Effect of Cyclic Loading on Strain Distribution in a Particulate-Reinforced Metal Matrix Composite
X-Ray Diffraction Analysis of Residual Stresses in Alumina-Chromium Composites and Comparison with Numerical Simulations
Deformation of In-Situ-Reinforced Bulk Metallic Glass Matrix Composites
Ferritic Steel Welds - A Neutron Diffraction Standard
A UK Residual Stress Intercomparison Exercise -Development of Measurement Good Practice for the XRD and Hole Drilling Techniques
X-Ray Diffraction Residual Stress Measurement Reliability: Stressed Reference Samples
A Study of Parameters Affecting the Quality of Residual Stress Measurements Using XRD
Residual Stresses in Injection Molded Thermoplastics
Weld Stress Mapping Using Neutron and Synchrotron X-Ray Diffraction
Residual Stresses Measurements on a Valve Camshaft
Effects of Surface Roughness of Base Metals on the Residual Stress of Filler Metals at Brazed Joints
Residual Stress Distributions around Clinched Joints
How to Select Induction Surface Hardening and Finished Grinding Conditions in Order to Ensure High Compressive Residual Stresses on Machine Parts Surface
Measurement and Analysis of Surface Residual Stresses Occurring under Different Quenching Conditions
Improvement of Residual Stress in Gear Using Water Peening by a Cavitation Jet Technique
Internal Stress Analysis for the Damage Study of a 16MND5 Bainitic Steel
Localisation of Deformation and Internal Residual Stresses in Billets for Zr-Nb Pipe Rolling
Measurement of Residual Stress Through a Shot Peened Surface Subjected to Successive Material Removal
Round Robin Test on the Determination of Residual Stress Depth Distributions by X-ray Diffraction
Behavior of Metallic Samples Subjected to External Stresses during Heating-Cooling Cycles
Yield Strength Determination of TiN Film by In-Situ XRD Stress Analysis Method
X-Ray Stress Measurements of TiCN Thin Films
Residual Stresses in Decorative Electroplated Coatings
Changes in Stress and Microstructure in Sputter Deposited Copper Films Due to Substrate Surface Effects
Evaluation of Growth and Thermal Strains/Stresses in Epitaxial Thin Films Using X-Ray Diffraction
X-Ray Measurements of TiN Film and Steel Substrate Subjected to External Loading
Macro Stress Mapping on Thin Film Buckling
Dislocation Studies of Thin Layers Under Stress
Determination of the Macroscopic Elastic Constants of a Phase Embedded in a Multiphase Polycrystal-Application to the -Phase of a Ti-17 Titanium Based Alloy
Intergranular Stresses Determined by Diffraction and Self-consistent Model
Distribution of Residual Strain In Polycrystals : Analysis by Diffraction and Homogenisation Techniques
A Neutron Diffraction Study of Residual Stress and Plastic Strain in Welded Beryllium Rings
In-Situ Measurement of Internal Strain Evolution during Deformation Dominated by Mechanical Twinning
Stress Corrosion in Mg-Al-Mn Alloy with Residual and Concentrated Stresses
The Effects of Service Lifetime and Duty on the Residual Stress in Railway Rails
Synchrotron X-Ray Measurements of Residual Stress in a Worn Railway Rail
A New Method for the Evaluation of Wear Damage in Dry Rolling Contact by Sound Intensity Level and Residual Stress Measurements
Crack Tip Residual Stress and Structural Health Monitoring
Dependence of Magnetic Properties, Texture and Residual Stresses on the Deposition Parameters of CoFe - Single and Multi - Layers
Elastic Constant Measurement in Supported W/Cu Multilayer Thin Films by X-Ray Diffraction
Stress Development in Ni/C-Multilayers on Si-Substrates with Increasing Period Number
Influence of Temperature on X-Ray Diffraction Analysis of ZrO2 Oxide Layers Formed on Zirconium Based Alloys Using a Synchrotron Radiation
Measurement of Stress in Phosphated-Iron Oxide Layers by In-Situ Diffraction of Synchrotron Radiation
Adaptation of the Warren Method to Determination of the Microstrain Distribution depending on Grain Orientation in Tubes of Zr-Based Alloys for Nuclear Industry
Internal Strains in Single Grains of Fatigued Polycrystalline Nickel
Load Partition in NiTi Shape Memory Alloy Polycrystals Investigated by In-Situ Neutron Diffraction and Micromechanics Modelling
R-Phase Phenomena in Neutron Diffraction Investigations of Thermomechanically Loaded NiTi Polycrystals
Dynamic Response of Martensite in Ni2MnGa Magnetic Shape Memory Alloys to Stress Caused by Constant Magnetic Field
On Determination of Residual Stresses in Coatings from the Measured Longitudinal Deformation of a Strip Substrate
Residual Stress Measurement in Soda- Lime Glass - A Nano-Indentation Method Using the Cube Corner Indenter
Prediction and Measurement of Residual Stresses in Cladded Steel
Diagnostics of Residual Stressed State of Welded Structures Using the Methods of Holographic Interferometry and Electron Speckle-Interferometry
Effect of Microstructure on Ultrasonic Measurements of Residual Stresses in Welded Joints
A Comparison of MAPS and Synchrotron X-Ray Methods: Stresses Measured in Railway Rail Sections
Influence of Material Properties on the Detectability of Residual Stress by Barkhausen Noise Analysis
Stress Analysis on Bearing Raceway by Barkhausen Noise
Piezospectroscopic Study of Residual Stresses in ZrO2/Al2O3 Composites
Residual Strain Evolution during the Deformation of Single Fiber Metal Matrix Composites
Microscale Residual Strains in Monolayer Unidirectional Fiber Composites
Characterization of Fiber/Matrix Interfaces Using X-Ray Microtopography
Study of Residual Stresses in Composite Laminates by the Finite Element Method and Experimental Analysis
「Nielsen BookData」 より