Metastable, mechanically alloyed and nanocrystalline materials : ISMANAM 2001 : proceedings of the International Symposium on Metastable, Mecanically Alloyed and Nanocrystalline Materials, University of Michigan, Ann Arbor, MI, USA, Jun 24-29, 2001

著者

• International Symposium on Metastable, Mechanically Alloyed and Nanocrystalline Materials
• Evan, Ma
• Atzmon, Michael
• Koch, Carl

書誌事項

Metastable, mechanically alloyed and nanocrystalline materials : ISMANAM 2001 : proceedings of the International Symposium on Metastable, Mecanically Alloyed and Nanocrystalline Materials, University of Michigan, Ann Arbor, MI, USA, Jun 24-29, 2001

editors, E. Ma, M. Atzmon and C. C. Koch

（Materials science forum, v. 386-388）

Transtech Publications, c2002

注記

Includes bibliographical refernces and indexes

内容説明・目次

内容説明

Metastable and Nanocrystalline Materials are currently among the hottest research topics in materials science. Volume is indexed by Thomson Reuters CPCI-S (WoS).

目次

Ductilisation of Fe-Based Metallic Glasses Nanostructure Synthesis and Amorphization during Cold Rolling Significance of the Heat of Mixing for the Amorphization of Multilayers by Deformation Processing Novel Multicomponent Amorphous Alloys Consolidation of Partially Amorphous Al-Fe-Zr Alloys Glass-Forming Ability of Mg-Cu-Co-Y Alloy Formation of Glassy Ti50Cu20Ni24Si4B2 Alloy by High-Energy Ball Milling Glass Formation of Containerless Levitated Zr55Al10Ni5Cu30 Alloy Containing Oxygen Phase Evolution and Microstructural Characterisation of High-Energy Ball Milled Al-Si-Fe-Ni Alloys Single Activation Enthalpy of Diffusion in a ZrTiCuNiBe Bulk Glass Around the Glass Transition After Structural Relaxation Viscosity of Mechanically Alloyed Amorphous Zr-Cu-Al-Ni Matrix Composites in the Supercooled Liquid Region Transformations in Primary Crystallites in (Fe,Ni)-Based Metallic Glasses Quasicrystal Formation, Phase Selection and Crystallization Kinetics in Zr-Cu-Ni-Al Based Metallic Glasses Formation of Quasicrystals and Crystallization Sequence in the Zr46.8Ti8.2Cu7.5Ni10Be27.5 Bulk Glass Generation and Annihilation of Nanocrystalline Nucleus in Undercooled Pd-Cu-Ni-P Particle Extremely Low Critical Cooling Rate for Pd43Ni10Cu27P20 Comparative Analysis of Crystallization of Al85RE8Ni5Co2 (RE = Rare-Earth Metals) Metallic Glasses with and without Supercooled Liquid Region Electrical Discharge Assisted Ball Milling: a Promising Materials Synthesis and Processing Method Atmospheric and Milling-Device Effects on the Activation Energy for Crystallization of a Partially Amorphized Ni-Mo Alloy Modeling of Fast Microcontact Interactions of Solids during Milling, Mechanical Alloying and Mechanical Activation by Dynamic Nanoindentation Technique Effect of Sintering Conditions on The Martensitic Transformation in a MA and SPS Sintered Cu-50 at.% Co Alloy Consolidation of Mechanically Alloyed Fe-27at%Al at High Pressure The Influence of Milling Intensity on Mechanical Alloying Structural and Chemical Characterization of Cu-Ag and Ni-Ag Nanocomposites Synthesized by High-Energy Ball Milling Mechanically Alloyed (Fe0.5Cu0.5)100-xZrx Alloys Evolution of Structure in the Disordered Nanocrystalline Fe75Si25 Alloy under Heat Treatment Amorphization and Reactivity of Silicon Induced by Mechanical Treatment Formation and Stability of Metastable Pd(Zr) Solid Solution Developed during Ball Milling and/or Heat Treatment of Pd3Zr Characterization of Alloyed Cementite Produced by Mechanical Alloying and Spark Plasma Sintering Structural Investigations of CuZr Prepared by Mechanical Alloying A Neutron Small-Angle Scattering Study of the HfPd System Synthesis and Characterization of Nickel, Cobalt and Iron Raney Catalysts Prepared by Mechanical Alloying and Alkaline Leaching NiAl-Al2O3 Nanocomposite Powders Formed by Reactive Milling Diamond Synthesis by Mechanically Induced Detonation Chemomechanical Effects Accompanying Mechanochemical Reactions and Creep Preparation of Disperse Ceramic Materials by Soft Mechanochemical Synthesis A New Mechanochemical Method for Metal Coating Mechanochemical Reduction of Copper Sulfide Mechanochemical Treatment of Scrap Tire Rubber Growth of Fe Oxide Whisker from Fe-Cu and Fe-Ag Supersaturated Solid Solution Nanoparticles Neutron Diffraction Study of Nanocrystalline Oxycarbide Glasses Prepared by Sol-Gel Production of Nanostructured CoO, Co3O4 and NiO Particles by Mechanically Induced Reactions Reaction Kinetics and Microstructural Evolution during the Heating of High Energy Ball Milled Al-TiO2 and Al-V2O5 Composite Powders Solid State Reactions between V2O5 and C during Mechanochemical Processing and Heating of V2O5/C Composite Powders Spark Plasma Sintering of Alumina-Cr and -Nb Composites Nanostructured Metastable -Titanium Based Alloy Synthesis and Properties of Al-Based Amorphous and Nanocrystalline Thin Films Formation of Nanocrystalline Ferrite in Fe-0.89C Spheroidite by Ball Milling Processing and Properties of Dense Cu Nanocomposites Precursor-Derived SiC/Si3N4 Nano/Nano Composites: Synthesis, Structure and Phase Evolution at High Temperatures Single-Step Preparation of Nanocomposites Gas-Phase Combustion Synthesis of Tin Oxide Nanoparticles Preparation and Characterization of Cr-O Films Grown by Low-Temperature Chemical Vapor Deposition Structure/Property Relationship in Silicon Oxycarbide Glasses and Ceramics Obtained via the Sol-Gel Method Structural Investigation of Silicon Carbonitride Glasses by Neutron Diffraction Solid Solution Behavior of CexZr1-xO2 Nanopowders Prepared by Flame Spray Pyrolysis of Solvent-Borne Precursors Recent Developments in Mechanochemical Nanoparticle Synthesis Thermal Stability of Nanostructured Electrodeposits Microstructure and Thermal Stability of Electrodeposited Nanocrystalline Nickel Microstructural Investigation of Grain Stability in Cryomilled Inconel 625 Thermally Stable Nanocrystalline Al-Mg Alloy Powders Produced by Cryomilling Tensile Properties of Bulk Nanocrystalline Hexagonal Cobalt Electrodeposits Modelling of Equal Channel Angular Pressing for Ultrafine-Grained Metals Study of Embedded Lead-Tin Nanoparticles in Aluminum Matrix Spin Dynamics of Nanostructured La2/3Ca1/3MnO3 Bulk Fe-Based Metallic Glass with Extremely Soft Ferromagnetic Properties Disordered Magnetism at the Grain Boundary of Pure Nanocrystalline Iron Magnetism and Structure of Nanoparticles and Mesoscopic Systems Structural and Magnetic Characterization of High-Coercive Ball-Milled Hard Magnetic (SmCo5) + Antiferromagnetic (NiO) Composites 57Fe Moessbauer Spectroscopy Study of FeSi2 Powders Prepared by Water Atomization Structural Change and 57Fe Moessbauer Spectroscopy Study of Mechanically Alloyed Fe2C Powder Properties of Fe and Co Nanoparticles Synthesized by Chemical Vapor Condensation Magnetic and Transport Properties of Mechanosynthesized FeCr2S4 Sulfospinel Influence of the B Content on the Structural and Magnetic Properties of Fe60Mn10Al30-xBx Prepared by Mechanical Alloying Structure of Fe-Ag Super-Laminates Fabricated by Repeated Rolling and Mechanically Alloyed Fe-Ag Powder High Strength Nanocrystalline Mg-Based Alloys Some Unresolved Issues Concerning Mechanical Behavior of Nanocrystalline Metals High Energy Milling of Si-Doped Titanium Aluminides- General Problems and Potential Applications Rapidly Solidified Powder Metallurgy Magnesium Alloys with Novel Mechanical Properties Use of a Cobalt-Based Metallic Glass for Joining MoSi2 to Stainless Steel Superplastic Forging of ZrTiCuNiBe-Bulk Glass for Shaping of Microparts Microstructural and Deformation Characteristics of a Laminated Amorphous/Nanocrystalline Alloy, Zr67Nb6Cu14Ni10Al3 Development of Welding Technologies in Bulk Metallic Glasses On the Atomic Force Microscopy Characterization of Some Zr-Based Metallic Glasses: Anomalous Electrostatic Behavior Nanocrystalline Al-Based Alloys for Elevated Temperature Applications Determination of the Mechanical Properties of Nanocrystalline Fe-Cr-Based Thermal Spray Coatings Microstructural Evolution and Mechanical Flow of 6061 Al during Equal Channel Angular Pressing Anomalous Elastic Properties of Metal-Metal Interfaces Mechanical Activation of Granite Rock Dust: Strength Development in Portland Cement Concrete and Lime Mortars Bulk Shape Memory NiTi with Refined Grain Size Synthesized by Mechanical Alloying Mechanosynthesis of Hydrogen Storage Alloys Electrochemical Properties of Nanocrystalline Sn-Based Alloys for Lithium Batteries Synthesis of B2-Structured Mg Alloys by Mechanical Alloying, and their Hydriding Properties Microstructural Characterisation of a Rapidly Solidified Mm(NiCoMnAl)5 Hydride-Forming Alloy Oxidation of Glassy and Nanocrystalline Zr70Pd30 Alloys H2S-Sensing Properties of Nanocrystalline SnO2 Powder Produced by Mechanochemical Milling Unusual Metastable Ion-Conducting States in Ionic Salt- Oxide Nanocomposites Synthesis of Biomaterials by Mechanochemical Transformation

「Nielsen BookData」 より

詳細情報

• NII書誌ID(NCID): BA58065413
• ISBN:
  • 0878498923
• 出版国コード: sz
• タイトル言語コード: eng
• 本文言語コード: eng
• 出版地: Zurich-Uetikon, Switzerland
• ページ数/冊数: xvi, 659 p.
• 大きさ: 25 cm
• 親書誌ID:
  • BA00294222