Textures of materials : ICOTOM 13 : proceedings of the 13th International Conference on Textures of Materials, Seoul, Korea, August 26-30, 2002

著者

• International Conference on Textures of Materials
• Lee, Dong Nyung

書誌事項

Textures of materials : ICOTOM 13 : proceedings of the 13th International Conference on Textures of Materials, Seoul, Korea, August 26-30, 2002

edited by Dong Nyung Lee

（Materials science forum, v. 408-412）

Trans Tech Publications, c2002

• : set.
• pt. 1
• pt. 2

注記

Includes bibliographical refernces and indexes

Organized by the Korea Institute of Metals and Materials, BK21 Division of Materials Education and Research, Seoul National University, Texture Control Laboratory (NRL), Seoul National University ; sponsored by the Korea Science and Engineering Foundation, POSCO

内容説明・目次

内容説明

Texture is a fundamental material characteristic which results from the microstructural evolution that takes place during various processes, including the thermomechanical deformation of materials. Therefore, texture-related phenomena will continue to be of great importance, because of their scientific interest as well as their effect upon industrial applications, in the 21st century. Volume is indexed by Thomson Reuters CPCI-S (WoS).

目次

Evolution of Recrystallization Textures - Classical Approaches and Recent Advances Structure and Formation of Polymer Single Crystal Textures Texturing and Grain Boundary Engineering for Materials Design and Development in the 21st Century From 2D to 3D Microtexture Investigations Tools for Polycrystal Plasticity Analyses Texture Development in Thin Films 20 Years WIMV, History, Experience and Contemporary Developments New Concepts to Measure, Calculate and Analyze Textures in Materials On the Development of New Scalar Measures of Heterogeneity X-Ray Combined QTA Using a CPS Applied to a Ferroelectric Ultrastructure Development of Grain-Orientation-Dependent Residual Stresses in Interstitial-Free Steel after Deformation Stereology for Recovering Grain Boundary Plane Distributions in the Crystal Frame Interactive and Quantitative Texture Determination by Consecutive Inverse Pole Figures Texture and Microstructure Analysis with High-Energy Synchrotron Radiation Some Remarks about the Processing of Automatic EBSD Orientation Measurements in View of Texture Determination Non-Destructive Texture Measurement Recrystallization and DeformationTexture Components Separating by High-Energy X-Ray Diffraction Local Texture Measurements with High-Energy Synchrotron Radiation on NiAl Deformed in Torsion Quantitative Texture Analysis with Hard (100 keV) Synchrotron X-Rays Neutron Diffraction Texture Study of NdFeB As-Cast Alloys and Magnets Measurement of Grain-Orientation-Dependent Stress and Stored Energy Using Spallation Neutron Source Non-Destructive Texture Analysis of a Co-Extruded Cu-Nb Tube Attenuation Corrections in Neutron Texture Experiment Optimization of Neutron Texture Experiment by Statistical Simulation of Pole Figures with Normal Distribution Orientation Correction Method of Distorted Samples during in situ Deformations Using a High Resolution EBSD Orientation Maps on TEM The Quantitative Analysis of Composite Materials by the RIETVELD Method with Texture Correction Characterisation of Orientation Noise during EBSP Investigation of Deformed Samples Investigation of Online Texture Measurement in Steel Sheets Based on X-Ray Area Detector Controlled Depth Penetration X-Ray Diffraction Measurement Quantitative Surface Roughness Determination of Materials by AFM: Some Limitations On the Use of RMS Roughness for Surface Roughness Characterization Texture Development Dependence on Grain Boundary Properties A Texture Component Crystal Plasticity Finite Element Method for Scalable Large Strain Anisotropy Simulations The Relation between Texture, Twinning and Mechanical Properties in Hexagonal Aggregates Atomistic Model of Rapidly Moving Grain Boundaries in FCC Metals Theory of Orientation Gradients Influence of Grain Neighbourhood on FCC Texture Simulations Lattice Rotations of Individual Bulk Grains during Deformation Prediction of Texture Development during Grain Growth in Pure Aluminum by Monte Carlo Simulation Spin of a Grain in Interaction with Differently Deformed Neighbors by Compatibility Condition Successive Selection of Active Slip Systems by the Least Incompatibility Criterion and Corresponding Texture Simulation Polycrystal Deformation Model Incorporating the Shape and Spatial Coordination of Constitutive Crystals Learning with METIS: Pole Figures and Euler Space Modeling Texture and Void Evolution in Polycrystals Influence of Selective Inactive Glide Plane on Texture Formation in Cold Rolling of Face Centered Cubic Metal A Model of Recrystallization Process in Motor Lamination Silicon Steel SELF-CON: A Self Consistent Software Package for Micromechanical Simulations Why Spin Sharing Seems to be Successful in Texture Simulations? Exploring Self-Consistent Models as a Source for Recrystallization Simulation Using Evolutionary Size Distributions to Model Recrystallization in Hot Rolled, Commercial Purity Aluminum Alloys Can we Relate the FCC Rolling Texture Transition to Cross Slip? Finite Element Simulation of Grain Interaction and Orientation Fragmentation during Plastic Deformation of BCC Metals Prediction of Deformation and Texture Evolution in the Vicinity of a Hard Particle in an FCC Crystal Mathematical Insights for Rate-Dependent Slip Model in Crystal Plasticity Finite Element Modeling of the Intragranular Reorientation and Stored Energy Induced by Deformation in an IF-Ti Steel Aggregate Submitted to Channel Die Compression Modeling of Recrystallization Using Monte-Carlo Method Based on EBSD Data Simulation of Ridging of Ferritic Stainless Steel Using Crystal Plasticity Finite Element Method Evaluation of Local and Global Elastic Properties of Textured Polycrystals by Means of FEM Monte Carlo Simulation for Abnormal Grain Growth during Nucleation Creating a Model for Percolation of Grain Boundaries in Polycrystalline Materials Nucleation Spectra for Recrystallization Simulated with the Grain Interaction Model for Deformation Textures Grain Subdivision and Local Texture Evolution Studied by Means of a Coupled Substructure-Texture Evolution Model FEM-Aided Taylor Simulations of Radial Texture Gradient in Wire Drawing Analysis and Modelling of a Variant Selection Mechanism Occurring by Phase Transformation of HSLA Steel Produced by Compact Strip Production Recrystallization Textures Modelling of Steels Torsional Modelisation of the Torsion Texture of Steel Cord A New Formulation for the Elastic-Viscoplastic Lower Bound and Intermediate Modeling for Polycrystalline Plasticity Monte Carlo Technique for Simulation of Recrystallization Texture in Interstitial Free Steels Taylor-Type Simulation of the Rolling Texture of Pure Aluminum Taking into Account the Initial Texture Higher Order Twinning and Microstructure Evolution Spectral Integration of Microstructure and Design Determination of 3 Boundary Planes in Bulk Copper Samples with Different Textures Characterization of Cold Drawn Gold bonding Wire with EBSD Influence of Substrate Texture on the Galvannealed Coating by EBSD Advanced Characterization of Twins Using Automated Electron Backscatter Diffraction Microtextural Inhomogeneity during Thermomechanical Processing of Coarse-Grained Niobium Automatic Orientation Measurements in TEM for Studying Fe-Ni Recrystallization Mechanisms Microtexture Measurement of Copper Damascene Line with EBSD High-Resolution EBSD Analysis of Deformed Material Deformation and Annealing Behaviour of Two Ni3Al Based Alloys Strain Rate Effects on Texture Evolution in OFE Copper Thermo-Mechanical Processing of Forged Tantalum Analyzed by OIM and X-Ray Diffraction Local Strain Heterogeneities after Cold Rolling of an Ultra Low Carbon Steel Deformation Texture of Cold Drawn Al6063 Tube In Situ Deformation Behavior of Retained Austenite in TRIP Steel Preferred Orientation Formation in Sheets Worked by Continuous Cyclic Bending A Method of Determination of Stored Energy in Single and Dual Phase Cold Rolled Materials Texture and Deformation Structure Evolution during Rolling of Individual Grains of Columnar Grain Nickel Analysis of Compression Textures of Aluminum and Nickel Rods Local Texture Evolution during Rolling Deformation of Single Crystals of {100} Orientation Texture Development in Ni-Co Alloys Rolled to Moderate Reductions Texture Formation with Different Rolling Modes in Copper Microband Formation in an IF Steel during Cold Rolling at Low Strain Levels Effect of Deformation Path on Torsion Texture and Stored Energy of Copper Rods Rolling and Annealing Textures of Dispersion Strengthened Copper Strips Effects of Shear Strain and Drawing Pass on the Texture Development in Copper Wire Yield Vertices of BCC Crystals for {110}, {112} and {123} Multiple Slip Comparison of Torsion Textures to Rolling Textures Monte Carlo Simulation of Grain Growth in Zr Processed by ECAP Evolution of Texture in Zr and Ti Grain-Refined by ECAP Textural and Microstructural Characterization of Equal Channel Angular Pressed Nickel Texture in Equal-Channel Angular Pressed Aluminum and Nickel Texture Evolutions of 5052 Aluminum Alloy Sheets Processed by Dissimilar Channel Angular Pressing Texture Analysis of Aluminum Plate Produced by ECAP Heterogeneous Microstructures and Microtextures in Al Processed by ECAE Calculation of Deformation Behavior and Texture Evolution during Equal Channel Angular Pressing of IF Steel Using Dislocation Based Modeling of Strain Hardening Neutron Diffraction Study of Texture and Stored Energy in ECA Pressed Copper Study of the GBCD for the Grain Growth Areas on Pure Cu Samples Extruded by Means of ECAE Microtexture of Lamellar Structures in Al Heavily Deformed by Accumulative Roll-Bonding (ARB) Microstructure and Texture Evolution during Annealing of an Aluminium ARB Material Texture Properties of AA8011 Aluminum Alloy Sheet Manufactured by the Accumulative Roll Bonding Process(ARB) Texture Evolution and Grain Refinement in Al Deformed to Ultra-High Strains by Accumulative Roll Bonding (ARB) Formation and Control of the Cube Texture in Fe-Ni Alloys Annealing Texture, Do We Understand It? Twin Nucleation at Triple Junction during Hot Deformation of Copper Polycrystal Dynamic Recrystallization at Triple Junction during High-Temperature Deformation in Copper Tricrystal Orientation Aspects of the Nucleation of Recrystallization in FCC Metals and Alloys with Low Stacking Fault Energies Orientation Dependence of Recrystallization in Aluminum Non-Oriented Silicon Steel Recrystallization Texture Study Deformation Microtexture and Recrystallized Orientations in Non-Oriented Electrical Steel Observed by High-Resolution EBSD Development of Cube Texture during Industrial Processing of High Purity Aluminum Foil Obtained with 99% Volume Fraction of Cube Component An EBSD Study of Static Recrystallization of Cold-Rolled Zircaloy-4 Sheets Texture Analysis of Copper Bonding Wire Early Stages of the Recrystallization Texture Formation in {112} - Oriented Silver Single Crystals Study of Annealing Texture Components in High Purity Aluminums Influence of the Primary Recrystallization Texture on Abnormal Grain Growth of Goss Grains in Grain Oriented Electrical Steels Microstructure and Texture Analysis in Twin-Roll Strip Cast Fe-36wt%Ni Alloy Investigation of Recrystallization Texture Evolution during Annealing of Hot Deformed AA3104 Alloy Statistical Analysis on the Development of Recrystallization Texture in IF Steel Formation of Recrystallization Textures after Hot Working of AA2014 and AA6063 Influence of the Rolling Reduction on Static Recrystallization in Copper Nucleation in Rolled BCC Metals Nucleation, Surface-Energy-Induced Selective Grain Growth and Final Texture in 3% Silicon Steel Formation Mechanism of Recrystallization Nuclei in Polycrystalline -Fe Monitoring of Primary Recrystallization in Aluminum Alloy by Resonance EMAT Spectroscopy Simulated Nucleation Textures of Recrystallization during Multiple Pass Hot Rolling of Aluminium Alloys Orientation Distribution in Dynamically Recrystallized Nickel Recrystallization Texture of a Copper Electrodeposit with the and Duplex Orientation Recrystallization Textures in some Hexagonal Alloys Recrystallization Textures in Coarse Grained Low Carbon and Interstitial Free Steels Deformation and Annealing Textures of Drawn Aluminum Bronze Wires Texture Evolution during the Annealing of Nanocrystalline Permalloy Texture Evolution and Wear Properties of Nanocrystalline Ni-P Electrodeposits Orientation Dependence of Grain Growth in a Nanocrystalline Ni Foil Texture Evolution in Grain Growth of Nanocrystalline Ni Annealing Texture in Thermal Stability of Ultrafine-Grained Ni Abnormal Grain Growth in Silicon Steel Texture Development in Zn-1.1%Al Alloy under Strong Magnetic Field Consideration of Neighbour Effect by Introducing a Limiting Radius for the Neighbourhood in Fe-3%Si Grain Growth Sulfur Segregation and Surface-Energy-Induced Selective Growth in Ultra-Thin 3% Silicon-Iron Alloys Effect of Grain Boundary Character on Selective Growth of Goss Grain in Fe-3%Si Alloy Mechanism of Discontinuous Subgrain Growth in As-Deformed Aluminium Single Crystals Effect of Deformation-Induced Intragranular Microstructure on Plastic Anisotropy and Deformation Textures The Role of Texture in Stress-Corrosion Cracking of Metals and Alloys Texture Effects on Zircaloy Oxidation : Experiment and Simulation Microtextural Analyses of the Ni/NiO System after High Temperature Oxidation The Influence of the Texture and Microstructure of a Zr-2.5Nb Substrate upon the Oxidation Kinetics The Influence of Substrate Texture on the Oxidation Kinetics of Copper The Role of Textures in the Corrosion Resistance of Electrogalvanized Zn Coatings Texture and Corrosion Mechanisms in Aluminized Steel Sheet Effects of Cathodic Polarization on the Pitting Behavior of Aluminum Single Crystals in Hydrochloric Acid Solution Effect of Texture on the Corrosion Behaviour of High Purity Aluminum Magnetic Properties of Fe-3%Si Sheets Having Ideal Orientations Anisotropic Magnetization Curve Simulation of an Easy-Plane Ferrimagnetic ErMn4Fe8C Carbide from Orientation Distribution Data Magnetic Alignment and Crystallographic Texture Relationships in Permanent NdFeB Magnets Texture Development and Texture Influence on the Mechanical Properties of the Mg-Alloy AZ31 Effect of C on the R-Value Anisotropy of Ti-Added IF Steels Through-Thickness Texture Inhomogeneity and its Effect on Formability in IF Steel Sheets Macroscopic Texture and Anisotropy in Ti-Added IF Steels The Evolution of the Elastic Properties of FCC Polycrystals Due to Texture Evolution The Influence of Tandem Rolling Process Parameters on the Texture and Earing Behaviour of AA1050 Calculation of Plastic Strain Ratio of Deep-Drawing Steel Sheets from Texture Evaluation of the Plastic Strain Distribution of Pearlitic Wires during Torsion Plastic Strain Ratios of Fe and Ni Electrodeposits The Effect of Texture on the Pseudoelasticity of CuZnAl Shape Memory Alloy Sheet Texture and Shape Memory Effect of TiNi Alloy Produced from Ti/Ni Laminated Sheets An Example of Texture Influence in Stress Analysis Effects of Textures on Hydrogen Diffusion in Nickel Texture Formation and Distribution of Residual Microstrains in Rolled Ti-48%Ni-2%Fe Single Crystals with Shape Memory Properties Mechanisms of Recrystallization in Cold and Warm Rolled Low Carbon Steel and IF Steel Issues Related to Texture in High Performance Steels Effects of Cementite Dissolution and Carbon Diffusion upon the Recrystallization Behaviour of Low Carbon Steel Orientation Selection during Phase Transformation in Low Carbon Steels Effect of Thermomechanical Processing Parameters upon Texture Development and Yield Strength Anisotropy in High Strength Linepipe Steels Investigation of Macroscopic Grain Sub-Division of an IF-Steel during Cold-Rolling Orientation Relationships and Variant Selection during - to - Phase Transformation in Low Carbon Steel Effect of Temper Rolling on Grain Growth in IF Steel Influence of Sulfur on Formability of Galvannealed Ultra Deep Drawing Quality Steel Texture and Phase Distribution in the Coating Layers of Galvannealed Steel Sheets Micro-Scale Orientation Study of RD// Cold Rolling Texture in Steel Increasing the Intensity of {111} by Thermomechanical Treatments A Comparative Investigation of Warm Rolled IF Steel and Low Carbon Steel Role of Grain Boundaries, Deformation and Transition Bands in the Nucleation and Successful Growth of Grains during the Recrystallization of IF Steel Evaluation of the Orientation Distribution of Intragranular Ferrite Grains Dynamically Formed during Deformation in a V-Added Low Carbon Steel by EBSD Effect of Inter-Pass Aging on Recrystallization Texture in 3% Si Grain-Oriented Electrical Steels Influence of the Goss Grain Neighbourhood during Secondary Recrystallization of Fe-3%Si Sheets Effect of Initial Grain Size Prior to Cold Rolling on Annealing Texture in Non-Oriented Electrical Steel Effect of Temper Rolling Reduction and Annealing Time on Texture Formation during Final Annealing in Electrical Steels Effect of Primary Microstructure on the Formation of a Sharp Goss Texture in Fe-3%Si Steels Effects of Sulfur Segregation on Selective Grain Growth and Final Texture in Thin Gauged Grain-Oriented 3% Silicon Steel Effect of Annealing Atmosphere on Surface-Energy-Induced Selective Grain Growth in Thin-Gauged 3% Si-Fe Strip Strip Thickness, Flow Rate of Hydrogen, Surface-Energy-Induced Selective Growth Kinetics and Final Texture in Thin-Gauged 3%Si-Fe Alloy System Coincidence Grain Boundary and Selective Growth of Goss Grain in Fe-3% Si Alloy Effects of Surface-Segregated Sulfur on Primary Texture and Surface-Energy-Induced Selective Grain Growth in Ultra-Thin 3% Silicon-Iron Alloy Abnormal Texture of Grain-Oriented Electrical Steel under High Cold Rolling Reduction EBSP Observation of Recrystallization Nuclei in a Cold Rolled 3%Si-Fe (100)[011] Single Crystal Microscale Texture of Hot Deformed 3%Si-Steel and Statically Recrystallized Orientations Observation of Secondary Recrystallization Process in 3% Si-Steel with EBSD Effects of Electrostatic Field on Recrystallization Texture and Grain Boundary Character Distribution in a Fe-3%Si Alloy Evolution of Microstructure and Texture Associated with Ridging in Ferritic Stainless Steels Transformation Behavior of Retained Austenite in Hydroformed TRIP Steel Texture Evolution during High Temperature Gas Nitriding of Duplex Stainless Steels Deformation and Recrystallization Textures in Duplex Stainless Steel Microstructure and Texture Analysis in a Cold-Rolled Austenitic-Ferritic Steel with Duplex Structure The Effect of Grain Boundary Character Distribution (GBCD) on Edge Cracking during Hot Rolling of Austenitic Stainless Steel Textural Development in AISI 316 Stainless Steel during Cold Rolling and Annealing Texture Evolution in Weld Regions of SUS-304 Stainless Steel and TRIP Steel QPA of Retained Austenite in TRIP-Aided Cold Rolled Steels Using Neutron Diffraction Determination of the Morphological Textures of Fibres in a Composite Material Made from a Textile of AISI 316L Fibres Factors Affecting the Fiber Texture in Strip-Cast Stainless Steels Effect of Rolling Reduction on the Development of Rolling and Recrystallization Textures in Al-Mg Alloys Modeling of Rolling and Recrystallization Textures in the Production of Aluminum Sheets Orientation Coherence of Rolled and Annealed Aluminum Plate Shear Texture Development and Grain Refinement in Asymmetrically Rolled Aluminum Alloy Sheets by Varied Reduction per Pass Effect of Initial Textures on the Texture of Aluminum after Asymmetrical Rolling Analysis of Deformation and Recrystallization Textures of Shear Deformed 1050 Aluminum Alloy Torsion and Annealing Textures of 99.99% Aluminum Influence of Pre-Annealing and Additional Deformation on the Recrystallization Texture of High-Purity Aluminum Foils Influence of High Hot-Rolling Temperature and Multistage Annealing upon the Cube Texture of High Purity Aluminum Capacitor Foils Formation of Shear Texture and Ultra-fine Grains in Warm Rolled AA 3004 Sheets Sharpening of the Cube Texture in AA3004 Alloy by Three Step Processes of Partial Annealing and Light Rolling Influence of the Strain Path in Torsion on the Deformation- and Recrystallization Textures of AA1050 and AA3103 Aluminium Alloys Recrystallization Textures and the Evolution of the P-Orientation as a Function of Precipitation in an AA3103 Alloy Rolling and Annealing Texture of 3004 Aluminium Alloy Texture Development during Tensile Deformation in Al-Mg Alloys Texture Evolution of AA5052 during Monotonic and Reversed Hot Deformation and Subsequent Recrystallization Effect of Strain Paths on the Evolution of Texture and Work Hardening in AA 5052 Sheets during Continuous Confined Strip Shearing Deformation Texture Evolution during Hot Deformation and Annealing of AA5182 Alloy Tool Geometry Dependence of Local Texture in Friction Stir Welds of 7050 Aluminum Plate Microstructure and Texture Evolution during Superplastic Deformation of 7475 Al Alloy The Texture of Ultra-Fine Grained Al-Mg Alloys Microstructure and Texture of Eutectic Al-Si Alloy with Multiple Cold Rolling and Heat Treatment Orientation Relationship of Phases in an Oxidation Protection Coating on a Ni-Based Superalloy Single Crystal Orientation Change of Epitaxial Pt Films on MgO(001) via Deposition Conditions Texture Analysis of Ferroelectric Thin Films on Platinised Si-Based Substrates with a TiO2 Layer Real Time In Situ Texture Investigations of Thin Film Growth Using RHEED Effect of Line Geometries on Textures in Damascene Cu Lines Ni and Ni-Alloy Tapes with a Very Strong Cube Texture as Substrates for High Temperature Superconducting Tapes Textures of Cu and Dilute Binary Cu(Ti) and Cu(In) Thin Films Oriented Growth of LiNbO3 Thin Films for SAW Properties Planar Texture Developed in Plasma Treated Polypropylene Films Relationships between the Texture and Longevity of TiN Thin Films Texture Evolution in TiN, TaN and W2N Thin Films Microstructure and Texture of Electrodeposited Cu on TiN Thin Films without a Cu Seed Layer Rietveld Texture and Stress Analysis of Thin Films by X-Ray Diffraction The Effect of Substrate Texture and Electroplating Conditions on the Texture and Surface Morphology of Copper Electrodeposits Effects of Local Texture and Grain Structure on the Sputtering Performance of Tantalum Texture Evolution in CVD-Grown Diamond Analyzed by Micro-Diffraction Texture Investigations In Damascene Copper Interconnects Texture and Grain Structure of Iron Film Obtained by CVD with Imposition of Magnetic Field Texture Evolution of Cu Thin Films during Annealing Computer Simulation of Martensitic Transformation in Constrained Films Evolution of Surface Morphologies in Sputtered and Electroplated Cu Films during Thermal Cycling Effects of Current Waveform and Bath Temperature on Surface Morphology and Texture of Copper Electrodeposits for ULSI Texture in Piezoelectric Titanates Recrystallization Textures during Laser-Assisted Machining of Zirconia Ceramics Textural Analysis of a Microcrystalline Quartz using X-Ray and Electron Backscatter Diffraction (EBSD) Techniques Deformation Mechanisms, Crystallographic Fabrics and Rheology of Quartz-Iron Oxide Rocks QTA of Prismatic Calcite Layers of some Bivalves, a Link to Trichite Ancestrals Texture Development and Phase Transformation in Liquid-Phase-Sintered SiC Ceramics EBSD Analysis of Grain Boundary Characteristics of Abnormally Grain Grown Alumina Crystallographic Distribution of Low Angle Grain Boundary Planes in Magnesium Oxide Anisotropic Microstructure of Iron Oxides Formed during High Temperature Oxidation of Steel Simulation of Texture Evolution during Wire Drawing of BSCCO Superconductors Modeling and Simulation of Deformation Texture in Semi-Crystalline Polymers: Application to Polypropylene and Nylon-6 Molecular Order and Morphology of Polymer Stabilized Liquid Crystals Control of Surface Morphology in PS and PVP Hybrid Thin Films Structure, Morphology and Low-Temperature Impact Resistance of Linear Low-Density Polyethylenes Morphology Control and Catalytic Application of Mesoporous Structures Prepared by Sol-Gel Processing Preparation of Tetracene Single Crystal : Determination of Crystal Orientation by Electron Diffraction Analysis of the Variant Selection in a Zy-4 Rod by Means of Specific Crystal Orientation Maps Textures in Powder-Metallurgy Processed Nb/Al Composites Evaluation of Casting Textures in Al/Al3Ti Platelet Functionally Graded Material Fabricated by a Centrifugal Solid-Particle Method Effects of Thermomechanical Processing on Texture Formation in Titanium Aluminides Textures and Ordering Influence in -TiAl Based Alloy Role of Cross-Slip in Determining Orientation Relationships during the -to- Transformation

「Nielsen BookData」 より

詳細情報

• NII書誌ID(NCID): BA58233471
• ISBN:
  • 0878499032
• 出版国コード: sz
• タイトル言語コード: eng
• 本文言語コード: eng
• 出版地: Uetikon-Zuerich, Switzerland
• ページ数/冊数: 2 v. (1794 p.)
• 大きさ: 25 cm
• 親書誌ID:
  • BA00294222