Bioceramics : proceedings of the 15th International Symposium on Ceramics in Medicine, the annual meeting of the International Society for Ceramics in Medicine : Bioceramics-15, University of Technology, Sydney, NSW, Australia, 4th-8th December, 2002
著者
書誌事項
Bioceramics : proceedings of the 15th International Symposium on Ceramics in Medicine, the annual meeting of the International Society for Ceramics in Medicine : Bioceramics-15, University of Technology, Sydney, NSW, Australia, 4th-8th December, 2002
（Key engineering materials, v. 240-242）
Trans Tech Pub., c2003
大学図書館所蔵 件 / 全3件
-
該当する所蔵館はありません
- すべての絞り込み条件を解除する
注記
Includes bibliographical references and indexes
内容説明・目次
内容説明
Volume is indexed by Thomson Reuters CPCI-S (WoS).
Since their inception Bioceramics meetings have provided a treasure house of information for both scientists and clinicians in the medical field. The clinical applications are numerous, in particular in the areas of orthopaedics, maxillofacial, plastic and ocular surgery, percutaneous devices, tissue engineering and sensors. This volume in addition to research papers contributed also presents selected overviews and discussions on recent bioceramics research and trends.
目次
- Calcium Phosphate Bioceramics: Past, Present and Future Mechanism of Apatite Formation on Bioactive Tantalum Metal in Simulated Body Fluid Comparative Study of Apatite Formation on Natural and Synthetic Polyamide in a Mimicking Solution to Body Fluid Investigation into the Formation of Bone-Like Apatite on Pretreated Metals Using Electrochemical Impedance Spectroscopy Porous Bioceramics Produced with Calcium Phosphate Nanoparticles Bonelike Apatite Formation on Calcium-Containing Silica and Titania Gels in Simulated Body Fluid Apatite Formation on Silk Fiber in a Solution Mimicking Body Fluid Synthesis of Biocompatible Calcium Phosphate Powders by Using an Eggshell Porous Bioactive Composites from Marine Origin Based on Chitosan and Hydroxyapatite Particles Hydrothermal Conversion and Sol-Gel Coating of Red Sea Coral A Novel Biomimetic Approach for the Manufacture of Hydroxyapatite Fibres Microwave Synthesis of Bioresorbable Carbonated Hydroxyapatite Using Goniopora Biomimetic Apatite Deposition on Titanium Substrates Treated with Low Concentrations H2O2 Solutions Apatite Formation on Polyamide Films Containing Sulfonic Groups by a Biomimetic Process Control of Dissolution of Porous -TCP by Coating with Hydroxypropylcellulose Development of a Bioactive Alumina-based Composite by Electrophoretic Deposition Apatite Formation on Polymers Coated with Titania Synthesized from an Aqueous Solution Biomimetic Growth of Calcium Phosphate over ATP Coupled PMMA Films The Effect of Organisms on Formation of Bone-Like Apatite on Porous Calcium Phosphate in Simulated Body Fluid Biomimetic Crystallization of Calcium Phosphates under Constant Conditions from the Revised SBF Fabrication of Porous Titanium and Biomimetic Deposition of Calcium Phosphate Control of Bioactivity for Silica Gel by Simple Surface Modification with Calcium Ion Effecs of the Incorporation of Proteins and Active Enzymes on Biomimetic Calcium-Phosphate Coatings Biomimetic Coating of Starch Based Polymeric Foams Produced by a Calcium Silicate Based Methodology Deactivation of Active Oxygen Species due to Metals and their Blood Compatibility Tailoring the Bioactivity of Natural Origin Inorganic - Polymeric Based Systems Biomimetic Hybrids - An Advancement for Biomaterials Toughening of Hydroxyapatite through Interpenetrating Organic/Inorganic Microstructure Bioceramics Derived from Polysiloxane - Hydroxyapatite Flexible Poly(Tetramethylene Oxide) (PTMO)-TiO2 Hybrid with Apatite-Forming Ability In Vitro Bioactivity of Sol-Gel-Derived Silica Fiber and P(L/D,L) LA Composite Preparation of Bioactive Polylactic Acid Composites Containing Calcium Carbonates Preparation of Porous Composites Consisting of Apatite and Poly(D,L-Lactide) Effect of Calcium Salt Content in the Poly( -Caprolactone)/Silica Hybrid on the Nucleation and Growth Behavior of Apatite Layer Effect of Heat Treatment on the Bioactivity and Mechanical Properties of a Poly( -Caprolactone)/Silica Hybrid Containing Calcium Salt Effect of Molecular Weight of Poly( -Caprolactone) on the Bioactivity of a Poly( -Caprolactone)/Silica Hybrid Containing Calcium Salt Effect of Silica Content in PMMA/Silica Hybrids Containing Calcium Salt on Calcium Phosphate Formation and Cell Responses Effect of Silica Content on the Bioactivity and Mechanical Properties of Poly( -Caprolactone)/Silica Hybrid containing Calcium Salt Oriented Needle-Like Apatite and Biodegradable Copolymer Composite Membranes In Vitro Study of Apatite Precipitation on Poly(2-Hydroxyethyl Methacrylate)-Silica Hybrids with Controlled Surface Areas Dissolution Characteristics of Bioactive Glasses Characterisation of a Novel Nitric Oxide Releasing Bioactive Glass Effect of Porosity on the Mechanical Properties of Bioactive Foam Scaffolds Dissolution of Bioactive Gel-Glass Powders in the SiO2-CaO System Structural Interpretation of the In Vitro Reactivity of SiO2-MgO-Na2O Glasses Creation of Bioactive Glass Coating on Titanium by Local Laser Irradiation
- Part 1: Optimization of the Processing Parameters Creation of Bioactive Glass Coating on Titanium by Local Laser Irradiation
- Part 2: Effect of the Irradiation on the Bioactivity of the Glass Preparation of Antibacterial Silver-Doped Silica Glass Microspheres by Sol-Gel Method Effect of Composition and Texture on Controlled Rate Release of an Antibacterial Agent from Bioactive Gel-Glasses Porous Bioactive 3-D Glass Fiber Scaffolds for Tissue Engineering Applications Manufactured by Sintering Technique Low Melting Temperature Machinable Glass Ceramics Effect of Particle Size on the Concentration and Rate of Ag+ Release from Antimicrobial SiO2-CaO-P2O5-Ag2O Gel-Glasses Effect of Ionic Variables (SiO2, Ca2+, PO43-) on Biomimetic Mineralization Treatment of Osteomyelitis with Antibiotic-Soaked Porous A-W Glass Ceramic Blocks Effect of the Type of Surfactant on Bioactive Glasses Foam Formation Characterization of CaO-SiO2-B2O3 Glass-Ceramics and Effect of Composition on Bioactivity Calcium Phosphate Invert Glasses and Glass-Ceramics with Apatite-Forming Ability Quantitative Analysis on the Absorption of Apatite-Wollastonite Glass-Ceramics In Vivo Fabrication of CaO-SiO2-B2O3 Porous Glass-Ceramics by Self-Foaming Method Novel Bioactive Coatings for Biomedical Applications Characterization of Plasma Sprayed Bioglass Coatings on Titanium The Deposition of Calcium Phosphates within Polyelectrolyte Multilayer Films Variation in Biological Properties of Thin Calcium Phosphate Films Formed by e-Beam Evaporation Thin Film Hydroxyapatite as a Model Dental Surface Bond Strength and Microstructure of Radio-Frequency Thermal Plasma Sprayed Hydroxyapatite / Titanium Composite Coatings Synthesis and Properties of Bioactive Ca-P-Ti Thin Films Synthesized by Reactive Plasma Co-Sputtering Deposition Reactive Species in RF Plasma Sputtering Deposition of Nanocrystalline Calcium Phosphate Bio-Active Films Effect of Particle Size on Microstructure of High Velocity Oxy-Fuel (HVOF) Sprayed Hydroxyapatite Coatings Effects of Bond-Coatings on Plasma Sprayed Calcium Phosphate Coatings Comparative Study of Bioceramic Coatings in Static and in Simulated Physiological Conditions Fabrication of TiO2-Apatite Composite Coating on Titanium by a Chemical Method A Radiological Follow-Up Study of Plasma Sprayed Fluorapatite (FA) Coatings Revolutionary New Bone Cement Technique by Interposing HA Granules Between Bone and Bone Cement Bone Cements Based on Tricalcium Silicate Histological Study of Interface Bioactive Bone Cement (IBBC) Retrieved at 14 Years after THA Pulpal and Periapical Tissue Responses to a Calcium Phosphate Cement Containing Barium Sulphate Calcium Phosphate Accelerated Setting Time of o-Ethoxybenzoic Acide (EBA) Temporary Cement Study of the Manipulation Energy on Fluoride Release by Dental Bioceramic TEM/SEM Morphological Analysis of Dental Tissue-Resin Bonding System in Dry and Wet Conditions Bone-Bonding Behaviour of PMMA Bone Cement Modified with Alkoxysilane and Calcium Acetate Alumina Powder / PMMA Composite Cements: An Evaluation of Osteoconductivity Effects of Spherical Tetracalcium Phosphate on Injectability and Basic Properties of Apatitic Cement Effects of Neutral Sodium Hydrogen Phosphate on Setting Property and Hemostatic Ability of Hydroxyapatite Putty as a Local Hemostatic Agent for Bone Physical Properties Self-Setting Bone Cement with Particle Size Distribution of Dicalcium Phosphate Dihydrate Bone Regeneration Therapy with Marrow Mesenchynmal Cells in 10 Cases: Short Term Results Osteo-Integration of Plasma-Spray, Biomimetic Octacalcium Phosphate and Carbonate-Apatite Coatings on Titanium Implants Investigation of Bone Formation using Non-Crystalline Calcium Phosphate Glass in Beagle Dogs Bone Formation Induced by Several Carbonate- and Fluoride-Containing Apatite Implanted in Dog Mandible Porous Beta-Calcium Pyrophosphate as a Bone Graft Substitute in a Canine Bone Defect Model The Effect of Aging an Injectable Bone Graft Substitute in Simulated Body Fluid Biodegradable Coralline Hydroxyapatite Composite-Gel Using Natural Alginate Silica/Calcium Phosphate Sol-Gel Derived Bone Grafting Material and Bone Remodelling. An eight Months In Vivo Study Titanium Dioxide/Ultra High Molecular Weight Polyethylene Composite for Bone-Repairing Applications: Preparation and Biocompatibility In Vivo Evaluation of Macroporous Calcium Metaphosphate Ceramic as a Bone Substitute Bioactive Composite Chitosan Membranes to Be Used in Bone Regeneration Applications The Use of New Zealand Animal Bone as Bioceramic Bone Xenografts: Concept to Clinical Study Effects of Substrate Morphology on Osteoblastic Response to Thin Film Calcium Phosphate Coatings Surface Properties of HAp Particles Obtained by Hydrothermal Decomposition of Urea and Calcium-EDTA Chelates High Osteoconductive Surface for Bioactive Glass by Electrical Polarization Crystal Growth Modification by Surface Charges on Ceramic Electret in Simulated Body Fluid Titanium Oxide Layers Obtained by Different Methods: Effect on Apatite Deposition The Influence of Polyelectrotytes on the Formation and Phase Transformation of Amorphous Calcium Phosphate Surface Structural Changes of Sintered Hydroxyapatite in Terms of Surface Charge Chemical Modification of Titanium Surface: Effect on Apatite Deposition Calcium Phosphate Formation on Chemically Modified Titanium Determination of the Internal Surface of Spongiosa-Like Ceramic Scaffolds using Light Microscopy and X-Ray Refraction Technique Biphasic Calcium Phosphate (BCP) Bioceramics: Preparation and Properties Synthesis and Sintering of Carbonated Apatites Morphological Stability of Plate-Like Hydroxyapatite Evaluation of the Biocompatibility of Nano-Sized Carbonate-Substituted Hydroxyapatite after Hydrothermal Treatment Synthesis and Characterization of Beta Tricalcium Phosphate Effects of Additives on Pore Structures in Freeze Dried Calcium Phosphate Granules The Characteristics and Properties of Hydroxyapatite Prepared by Spark Plasma Sintering (SPS) Synthesis and Characterization of Ti-Substituted Hydroxyapatite Ultrastructural Characterisation of Hydroxyapatite and Silicon-Substituted Hydroxyapatite High Resolution Transmission Electron Microscopy Investigation of Single Crystal Apatite Fibres Synthesized by using a Homogeneous Precipitation Method Control of Crystal Orientation of Hydroxyapatite by using a High Magnetic Field Synthesis and Characterization of c-Axis Oriented Apatite Aggregates Novel Inorganic Materials for Biomedical Applications Crystallization of a Bone-Like Apatite onto Cholesterol from Aqueous Solutions Low Temperature Deposition of Bioactive Crystalline Titania Films: Effects of Tantalum Low Temperature Synthesis of Bioactive TiO2 Thin Film by Two-Step Treatment Accurate Geometric Characterization of Macroporous Scaffold of Tissue Engineering Improvement of Porous Titanium with Thicker Struts Preparation and Evaluation of Dense Hydroxyapatite by PECS Method Synthesis of Hydroxyapatite and Tricalcium Phosphate Nanoparticles - Preliminary Studies Synthesis of New Biocompatible Apatite-Type Rare-Earth Silicates Hydroxyapatite Coated Porous Alumina as a New Orbital Implant Fibrillogenesis of Hydroxyapatite/Collagen Self-Organized Composites Joining Hydroxyapatite Ceramics and Titanium Alloys by Hydrothermal Method Study of the Release Kinetics on some Anticancer Substances from Porous Ceramic Capsule Dosimetric Analysis and Characterisation of Radioactive Seeds Produced by the Sol-Gel Method Effect of Fabrication Processes on the Antimicrobial Properties of Silver Doped Nano-Sized HAp Encapsulation of Hydroxyapatite Particles with Fluorapatite by a Multistep Procedure Hydroxyapatite -Zirconia Functionally Graded Bioceramics Prepared by Hot Isostatic Pressing Highly Interconnected and Functionally Graded Porous Bioceramics Adsorption on RF-Sputtered CaP Coatings in SBFs Biocompatibility of Hydroxyapatite Films Formed on Ti Metal by a Simple Urea and Urease Treatment Long-Term Stable Biomaterials Based on Apatite and Calcium Zirconium Orthophosphate Micro-CT Analysis of New Bone Formation Around Implant with Electrochemically Deposited Apatite Quantitative Analysis of Bone Formation in the Composites of Cultured Marrow Cells and Hydroxyapatite by X-Ray Computed Tomography The Improvement of Titanium Reinforced Hydroxyapatite for Biomedical Applications Traumatological and Ballistic Aspects of Alumina Ceramics The Tissue Response to a Novel Calcium Zirconium Phosphate Ceramics The Effect of Bioceramic Surface Chemistry on Osteogenic Cell and Healing Bone Gene Expression and Bone Induction Regulated by Bioceramic Substratum Molecular Biologic Detections of Cell Activation Related Proteins on Polarized Hydroxyapatite Development and Biological Evaluation of Apatite Fibre Scaffolds with Large Pore Size and High Porosity for Bone Regeneration Marrow Mesenchymal Stem Cells Cultured on Alumina Ceramics (From Basic Science to Clinical Applications) Osteogenic Potential of Cultured Bone/Ceramic Construct: A Comparison with that of Marrow Mesenchymal Cells/Ceramic Composites The Efficiency of FK 506 in In Vitro Bone Formation by Human Bone Marrow Cells The Use of Mesenchymalpluripotent Cells with Porous Ceramics in the Treatment of Bony Defects Introduction of Ectopic Bone Formation by BMP-2 Incorporated Biomimetically into Calcium Phosphate Coatings of Titanium-Alloy Implants Cell Attachment and Proliferation on Hydroxyapatite and Ion Substituted Hydroxyapatites Interactions at the Surface of Oxide Bioceramics with Biological Liquids and Blood Cells The Functional Expression of Osteoblasts Grown on Rapidly Resorbable Calcium Phosphates Response to Osteoblastic Cells of Bioactive Organic-Inorganic Hybrid Cytocompatibility on Silicone Modified with Organoalkoxysilane due to Emulsion Polymerization The Early Osteogenesis Induction of Bone-Like Apatite after Implantation into the Muscle of Rats Fluoride-Substituted Apatites Support Proliferation and Expression of Human Osteoblast Phenotype In Vitro Effect of Prenucleation of RF-Sputtered CaP Coatings on In Vitro Rat Bone Marrow Cell Behaviour Cytological and Biochemical Evaluation of Osteoblast in Contact with Ionic Products of Bioactive Ceramics Surface Modification of Bioceramics Affect Osteoblastic Cells Response Inductive Contact and Adherence Manipulation of Osteoblast-Like Cell on Polarized Hydroxyapatite Ceramics Quantitative Monitoring of In Vitro Mineralization Process using Fluorescent Dyes The Effect of 58S Bioactive Sol-Gel Derived Foams on the Growth of Murine Lung Epithelial Cells Biocompatibility Study of Biodegradable Starch-Hydroxylapatite Particulates for Bone / Dentistry Fillers Flowcytometric Analysis of Human Osteoblastic Cells Expressing Bone Specific Alkaline Phosphatase Needs of Bioceramics to Longevity of Total Joint Arthroplasty Clinical and Tribological Perspectives of Wear in Alumina-Alumina THR Novel Zirconia / Alumina Composites for TJR Long Term Data Concerning the Use of Alumina on Alumina Bearings in Total Hip Replacements Enhanced Fixation of Uncemented Knee Replacement with Hydroxyapatite Phase Transformation and Residual Stresses in Retrieved Zirconia Ball Implant Bio-Lubrication Phenomena affect Residual Stresses and Phases of Zirconia Implants The Color of Bioceramics Chemically Textured and Oxidized Zirconium Surfaces for Implant Fixation Ceramic on Ceramic Bearings in Total Hip Arthroplasty Retrieved Ceramic Total Knee Prosthesis in Clinical Use for 23 Years Comparison of the Wear Properties of Polyethylene Plate in Total Knee Prostheses (TKP) using Different Femoral Component Materials Alumina Ceramic Talar Body Prosthesis for Idiopathic Aseptic Necrosis of the Talus Investigation of the Wear Properties of Ceramic Total Hip Prostheses Made of Alumina and Zirconia Combination: A Hip Simulator Study Retrieval of Ceramic Wear Couples in Total Hip Arthroplasty Radiostereoanalysis of Press-Fit Cups with Alumina Liner. A Randomized Clinical Trial Clinical and Laboratory Wear Studies of Zirconia-on-UHMWPE Combination in Cementless THA Preliminary Investigation of Al-Doped Zirconia in Water for THR's Low Temperature Stability of Zirconia/Alumina Hip Joint Heads Water-Lubrication Effects on Zirconia Debris Production in Hip-Joint Simulators Unexpected Subluxation Detected after Cemented Alumina-on-Alumina THA Computer Assisted Orthopaedic Surgery in Total Hip Arthroplasty with Alumina Alumina Pairing Impingement in Ceramic Hip Patien: A Retrieval and Wear-Scar Analysis of Femoral Head Squeaking and Neck-Socket Impingement in a Ceramic Total Hip Arthroplasty Femoral Reconstruction with Macroporous Biphasic Calcium Phosphate Ceramic in Revision Hip Replacement Medium Term Clinical Results of Hydroxyapatite-Coated Total Knee Replacements Hydroxyapatite-Coated Screws Prevent Lag Screw Cut-Out in Trochanteric Fractures Fixed with DHS: A Prospective Randomized Study Evaluation of Periacetabular Bone Reaction after Total Hip Arthroplasty with Alumina-Alumina Pairing Using Computed Tomography The Influence of Boundary Conditions on Finite Element Analysis Investigation of the Role of Dental Ceramic Core Material using Finite Element Analysis The Dependence of Sintering Parameters on the Surface Quality and Roughness of Ceramic Veneered PFM-Restorations Microstructure of Alumina- and Alumina/Zirconia-Glass Infiltrated Dental Ceramics Lessons Learned from Implant Retrieval of Ceramic Bearings: A Case Study Repair of Segmental Long Bone Defect in Rabbit Femur using Bioactive Titanium Cylindrical Mesh Cage Introducing a Unique Measurement for Biomaterial Nanomechanics Toward Quantitative Modeling of Morphology Changes in Solids with Phase Field Theories: Atomistic Arguments for the Determination of Higher Gradient Coefficients Macro and Micro Fracture Behaviour of Biomaterials Comparison of Sintering and Mechanical Properties of Hydroxyapatite and Silicon-Substituted Hydroxyapatite Bone-Bonding Ability of Anodic Oxidized Titanium Elastic/Plastic Surface Deformation of Porous Composites Subjected to Spherical Nanoindentation Mechanical Properties of Hydroxyapatite-Granule-Implanted Titanium Alloy Fatigue Performance of a Bioactive Composite Developed for Hard Tissue Replacement Sintering Effects on Mechanical Properties of Bioglass Reinforced Hydroxyapatite Composites Mechanical Properties of Bioactive PDMS-CaO-SiO2-TiO2 and PTMO-CaO-TiO2 Hybrids Soaked in a Simulated Body Fluid Mechanical Properties of Glass-Ceramic A-W - Polyethylene Composites: Effect of Filler Content Mechanical Property of Bioactive Polyethylene-Titania Composite Prepared by Hot Pressing Fracture Toughness, Microstructure and Toughening Mechanism of Leucite and Lithium Disilicate Glass Ceramics Effects of Al2O3 Addition in Glass Composition on the Mechanical Properties of A/W Glass-Ceramic Structure, Stability and Mechanical Properties of Calcium Aluminoborate Containing Na2O and P2O5 Glass for Biomedical Applications
「Nielsen BookData」 より