Advanced powder technology : proceedings of the 3rd International Latin-American Conference on Powder Technology, November 26-28, 2001, Santa Catarina Brazil
Author(s)
Bibliographic Information
Advanced powder technology : proceedings of the 3rd International Latin-American Conference on Powder Technology, November 26-28, 2001, Santa Catarina Brazil
(Materials science forum, v. 416-418)
Transtech Publications, c2003
Available at / 2 libraries
-
No Libraries matched.
- Remove all filters.
Note
Includes bibliographical refernces and indexes
Description and Table of Contents
Description
This volume focuses on the technology of metal and ceramic powders.
Volume is indexed by Thomson Reuters CPCI-S (WoS).
Table of Contents
Synthesis and Characterization of Eletrocatalyst Powders for Application in PEM Fuel Cells
Microstructure Study and Crystalline Phase Formation on Nb2O5-Ba9Ti2O20 Microwave Resonators
Statistical Analysis of Ti-6Al-7Nb Powder Mixture Homogeneity
Use of Titanium Powders Obtained by Sponge Screening and for the HDH Process in Titanium Alloy Production for Powder Metallurgy (P/M)
A Computer Simulation of the Hard-Metal Structure: the Interpretation of Structural Features
Microstructural Parameters of Cu-Al2O3 Dispersion Strengthened Materials
Technological Characteristics of Garnets for Ultra-High Pressure Water Jets
Influence of Sharpening and Coating Operations on the Wear of Sintered High Speed Steel Tools
Characterization of Sintered NdFeB Magnets after Phosphating in Alkaline and Acidic Environments
Electrochemical Characterization of Niobium Carbide Reinforced Composites for the Production of Industrial Gases
Corrosion Resistance of Powder Injection Moulded AISI 316L and 17-4PH Stainless Steels in Acid Rain Environments
Corrosion Characterization of Sintered Stainless Steel Filters with Surface Films Formed in Sulfuric Acid Solutions Containing BTAH
Corrosion Performance and Cytotoxicity of Sintered Nd-Fe-B Magnets
Effect of Heat Treatments on Cr-Mo Steels Based on Astraloy CrM Powder Grade with Manganese Additions
Influence of the Heat Treatment on the Microstructure of AISI T15 High Speed Steel
Effect of Heat Treatment on the Microstructure of Spray Formed AISI M2 High-Speed Steel
Anisotropic Ferrite Produced with Coarse Particles Milled from Sintered Magnets
Phase Monitoring during Nd(Fe,M)12 (M=Mo or Ti) Compound Nitrogenation by Chemical Reaction with Sodium Azide (NaN3)
Magnetic Properties of Spray Formed Fe-3%Si, Fe-5%Si and Fe-6.5%Si Alloys
The Effect of Processing Parameters and Zirconium Additions upon the Magnetic Properties of Rare Earth Iron Boron HDDR Magnets
High Energy Ball Mill Processing
Production of Carbides Cemented by Mechanical Alloying
Stoichiometric Quantification of the Amorphous Precursor in the Mg-Ni System
An Investigation of the use of Stearic Acid as a Process Control Agent in High Energy Ball Milling of Nb-Al and Ni-Al Powder Mixtures
Characterization of High-Energy Ball Milling of Ba Hexaferrite
Combustion Synthesis of High-Energy Ball-Milled Nb + 3Al Powder Mixtures
Contamination Effects on Precipitation Hardening of Cu-Alumina Alloys, Prepared by Mechanical Alloying
The Effect of Zirconium Additions on the Magnetic Properties of Pr-Fe-B HD Sintered Magnets
Effect of Rare Earth Additions in the Mechanosynthesis of Molybdenum Carbide
Extrusion of Aluminum Alloys Prepared from Mechanically Alloyed Powder
Plasma Sintering of Fe-NbC Composites
Production and Characterization of Composites of the Al-TiO2 System Using the SHS Process
Influence of Processing Parameters on the Microstructure and Oxidation Behavior of Hot Pressed Ni-20Cr + WC Metal Matrix Composites
Flux-Assisted Infiltration of Molten 6063-Al into TiC Beds
Superplastic Deformation of Al-Al4C3 Composites
Synthesis of Diamond Reinforced Al-Mg Nanocrystalline Composite Powder Using Ball Milling
Mechanical Behavior of Al-Mg-Si Alloys Reinforced with Ceramic and Intermetallic Particles
Processing of Diamond Composites for Cutting Tools by Powder Metallurgy and Rotary Forging
Evaluation of As-Hipped PM High Speed Steel for Production of Large-Diameter Cutting Tools
Chromium Steel Powders for Components
High Strength Synchronizer Hubs by Sinter-Hardening
Sintering of P/M Nb-TiB2 Alloys
Dissolution of Niobium Particles during Ti-6Al-7Nb Sintering
Sintering Iron Using a Hollow Cathode Discharge with External Ti Cathode
Sintered High Nitrogen Stainless Steel Obtained using Pre-Mixed Powders
Microstructural Characterization of Rhenium Powder Obtained at Various Temperatures
Deposition of Aluminum onto Titanium Powder in its Self-Convective Motion by DC Sputtering
Milling and Hot Consolidation of Al-Fe-Nb Alloy
Compacting of Molybdenum Powder by Pressures Higher than 2.0 Gpa
The Effect of Compaction on Expansion and Gas Release in Al-TiH2 Powder Compacts
Synthesis of Powder Molybdates for Micro-Alloying of ADI Castings
Mechanical and Microstructural Characterisation of P/M High-Speed Steel Valve Seat Inserts
Differences of Behavior between Filtering Hydrocyclones with Bradley and Rietema Geometries
Evaluation of Different Routes for HDH Processing of Ti-6Al-4V Alloy
Plasma Dewaxing and Sintering of Compacted Unalloyed Iron
The Energy Balance during Plasma Sintering
Conjoined Influence of Five Variables in Laboratory Scale Column Flotation
Influence of Powder Geometry on Powder Injection Molding Process Parameters
Properties of Sr-Doped Lanthanum Manganites for SOFC
Structure and Properties of Rapidly Solidified P/M Samples of Al-Mn-Cr Alloys
Nitrogen Sintering of High Speed Steel Processed by Starch Consolidation
Modulus of Rupture Evaluation on P/M Cold Worked Tool Steels Submitted to Gas Nitriding
Effect of Refractory Element Additions on the Properties of Sintered Stainless Steels
Microstructure of Spray Formed Fe83Nb4ZrTiB9Cu2 Alloy
Spreading Mechanism of Molten Al-Alloys on TiC Substrates
Solidification of the Non Dendrite-Forming Pb-16wt%Sn Alloy During Spray Forming
Mechanical and Microstructural Characterisation of Cylinder Liners
Grain Growth and Mechanical Properties of Spray Formed Al/SiC Composites
Microstructure of Spray Formed 2.9%C-22%Cr High Chromium White Cast Iron
Particle Size Distribution in the Radial Direction of the Spray Cone and its Influence on the Formation of Porosity in Fe-6%Si Alloy Processed by Spray Forming
Influence of the Process Parameters in the Microstructural Evolution of Fe-6.5% Si Alloy Processed Via Spray Forming
Microstructural Characterization of Spray Formed Ni-Al-Cr-C Alloys
Recycling of Polymeric Matrix Composites
Oil Removal from Sintered Iron Using Plasma DC Discharge
The Influence of Iron Powder Grade and Manganese Carrier on the Homogeneity Modulus of Sintered Mn Steels
Preliminaries Studies in Si3N4-SiC(w) Ceramic Composites with Rare Earth Concentrate (CTR) Aids
Influence of Yttrium Oxide Doping on the Microstructures of Alumina-Niobium Carbide Composites
Densification of Reactive Milled Al2O3-TiC Composite Powders
Study of the Effects of the Atmosphere on the Wettability of SiC by Copper Alloys
Wetting of Silicon Carbide by Cu-Si Alloys
Al2O3-Ni3Al Composites Obtained by Reactive Milling and Reactive Sintering
Sintering Behavior of Alumina-Niobium Carbide Ceramics from Polymer-Filler Mixtures
Development and Characterization of Si-Al-O-N-C Ceramic Composites Obtained from Polysiloxane-Filler Mixtures
Gelcasting Ceramic Foams with Alternative Gelling Agents
Synthesis of Aluminium Titanate Powder by Sol-Gel Technology
Cubic Polycrystalline Zirconia Stabilized with Yttrium and Rare Earth Oxide Mixture: Processing, Phase and Microstructure Characterization
Processing and Characterization of Active Silica Obtained from Rice Husk Ash
Mixture Design and Response Surface Analysis of Pozzolanic Products
Influence of the Mixing Speed and Time on the Mechanical and Physical Properties of Laminated Ceramic Plates
Characterization and Adsorption of Phenol by Organophilic Clays
Evaluation of Hardness and Fracture Toughness of TZP Ceramics Stabilized with Yttria Concentrates
Finite Element Simulation of Ceramic Powder Isostatic Pressing Process Using Material Parameters for Uniaxial Compaction
Influence of Microstructural Characteristics on the Mechanical Properties of Silicon Nitride with Al2O3, Y2O3 and Nd2O3 as Sintering Aids
The Role of Light Rare Earths in the Thermal Degradation Behaviour of ZrO2-CeO2-Y2O3 Ceramics
Elastic Modulus Determination of ss-Si6-xAlxOxN8-x with Rare Earth Concentrate by Dynamic Mechanical Analysis
Oxygen Mobility in Bi:Sr:Ca:Cu:O Ceramic Measured using Anelastic Relaxation Methods
Sintering Behavior of Aluminum Nitride Doped with Y2O3
The Influence of the Sintering System on PMN Properties
Diffusive Phenomena at Si3N4/Glass Interfaces
Sintering Behavior of Tetragonal Zirconia Ceramic Stabilized with Yttria and Rare Earth Oxide (YRE) Mixtures
Mechanical Characterization of Alumina-Doped Tungsten Carbide
Analysis of Mechanical Properties in Si3N4 - SiC(w): Gas-Pressure and Hot Uniaxial Pressing Sintering
Comparison of Physical and Mechanical Properties in the Ceramic Materials Si3N4-CTR-AlN and Si3N4-Y2O3-AlN
The Influence of the Powder Preparation Route on the Sensitivity of TiO2 Doped MgCr2O3 Ceramic Humidity Sensors
Microstructural Evolution of Alumina Ultrafine Powders Obtained by High-Energy Milling
Mechanical Properties of Al2O3-NbC Composites Produced by Hot-Pressing
Spectroscopic Studies of SnO2 doped with Cr, Co or Nb
Bonelike Apatite Coating on Ti6A4V: Novel Nucleation Process Using Sodium Silicate Solution
Variables that Affect the Indentation Fracture Testing (IF) of a Dental Porcelain
Dental Implants: Surface Modification of cp-Ti Using Plasma Spraying and the Deposition of Hydroxyapatite
Mechanical Behavior of Hip Implant Constituted of a Ceramic Sphere and Stem of Polyurethane Resin
Synthesis of ZrO2-Based Ceramics for Applications in SOFC
Qualitative Analysis of Silicon Nitride Synthesized by Ammonolysis of Silicon Tetrachloride
Al2O3/Mullite/SiC Powders Synthesized by the Microwave-Assisted Carbothermal Reduction of Kyanite
Ni-Zn Ferrite Nanoparticles Prepared by Combustion Reaction
Microwave Synthesis of Ni-Zn Ferrite Powders
Preparation and Characterization of Ce0.8Gd0.2O1.9 Solid Electrolyte by Polymeric Precursor Techniques
Study of the Mechanical Performance of Composites of Rubber Powder and Cement
A Method for the Digital Image Analysis of Ceramic Grains Based on Shape Factor Segmentation
Experimental Evaluation of Conical-Cylindrical Thickeners Operanting with Aqueous Barium Sulfate Suspensions
Characterization of the Stoichiometric Ratio O/U in UO2 Samples by Gravimetric and Voltammetric Methods
Recycling of a Petroleum Waste in Ceramic Bodies
Quantitative Phase Analysis of Ceramic Raw Materials Using a Non-Negative Least Squares Routine
Magnetic Susceptibility and Saturation Magnetization of some Carbonyl Iron Powders used in Magnetorheological Fluids
by "Nielsen BookData"