Magnesium alloys 2003 : proceedings of the Second Osaka International Conference on Platform Science and Technology for Advanced Magnesium Alloys 2003, Osaka, Japan, 26-30, January, 2003
著者
書誌事項
Magnesium alloys 2003 : proceedings of the Second Osaka International Conference on Platform Science and Technology for Advanced Magnesium Alloys 2003, Osaka, Japan, 26-30, January, 2003
(Materials science forum, v. 419-422)
Trans Tech Publications, c2003
- v. 1
- v. 2
- タイトル別名
-
Materials science forum
大学図書館所蔵 件 / 全1件
-
該当する所蔵館はありません
- すべての絞り込み条件を解除する
内容説明・目次
内容説明
Volume is indexed by Thomson Reuters CPCI-S (WoS).
Magnesium alloys are among the most promising ecomaterials for various high-tech applications in the 21st Century. This 2-volume set comprises the proceedings of the 2nd International Conference on Platform Science and Technology for Advanced Magnesium Alloys (PSTAM 2003). The papers cover a wide spread of perspectives on the academic fundamentals, and industrial applications, of magnesium alloys.
目次
Progressive Steps in the Platform Science and Technology for Advanced Magnesium Alloys
Magnesium Research Trend in Japan
Magnesium Die Casting Alloys for Use in Applications Exposed to Elevated Temperatures: Can They Compete with Aluminium?
Issues that Influence Magnesium's Use in the Automotive Industry
Current and Future Use of Magnesium in the Automobile Industry
Recent Magnesium Alloy Development for Automotive Powertrain Applications
Automotive Applications of Magnesium Alloys
Fatigue Crack Propagation Behavior of AZ91D Magnesium Alloy
Effect of Stress Ratio on Fatigue Crack Growth Behavior of Magnesium Alloys
Pyramidal Slip in Magnesium Alloy Single Crystals
On Methods for Improving the Fatigue Performance of the Wrought Magnesium Alloys AZ31 and AZ80
Cyclic Deformation Behavior of Magnesium Alloys AZ31 and AZ91 in the Temperature Range 20-300 DegreesC
Fatigue Fracture Mechanisms for Caliber Rolled AZ91D Magnesium Alloys
Corrosion Fatigue of Magnesium Alloys
Hall-Petch Parameters for Tension and Compression in Cast Mg
Temperature Dependence on Impact Failure Behaviour in Extruded Pure Magnesium and Mg-Al-Zn System Alloys
The Effect of Heat Treatment and Orientation on the Mechanical Behavior of Extruded Mg-Al-Zn Alloy
Mechanical Behaviour of Cast Magnesium Alloys
The Effect of Microstructural Features and Defects on the Ductility of High Pressure Die Cast AS21, AM60 and AZ91
Effects of Solid Solution Treatments on Microstructure and Mechanical Properties of AM60B Magnesium Alloys with RE Addition
Microstructure and Mechanical Properties of Mg-Zn-Ag Alloys
Microstructures and Mechanical Behavior of Processed Mg-Li-Zn Alloy
Guide for Enhancement of Room Temperature Ductility in Mg Alloys at High Strain Rates
A Mechanistic Understanding of the Formability of Magnesium: Examining the Role of Temperature on the Deformation Mechanisms
New Deformation Mechanisms in Fine-Grain Mg Alloys
Influence of Grain Boundaries on Plastic Deformation in Pure Mg and AZ31 Mg Alloy Polycrystals
Mechanical Properties and Texture Evolution in ECAP Processed AZ61 Mg Alloys
Optimum Design of Plate Wing with Magnesium Alloys on Supersonic Flutter Characteristics and Structural Mass
Reliability and Optimum Design of Structures with Magnesium Alloys
Lessons Learned from Small Space Systems Development Using Magnesium Alloys
Generalized Stacking Fault Energy and Dislocation Properties for Various Slip Systems in Magnesium: a First-Principles Study
Anomalous Activity of Nonbasal Dislocations in AZ31 Mg Alloys at Room Temperature
Enhanced Grain-Boundary Sliding at Room Temperature in AZ31 Magnesium Alloy
Microstructures and Tensile Properties of Wrought Magnesium Alloys Processed by ECAE
Development of High Strength and Ductile Magnesium Alloys for Automobile Applications
Microstructures and Tensile Properties of Mg-Zn-Y Alloys Containing Quasicrystals
Requirements and Feasibility of Magnesium Alloys for Aerospace Applications
Precipitation Hardening in Mg-3 wt%Nd(-Zn) Casting Alloys
Microstructure and Mechanical Properties of MEZ Casting Alloy
Improving the Performance of Mg-Rare Earth Alloys by the Use of Gd or Dy Additions
Effect of Applied Stress on Precipitation Behavior in AZ91D Magnesium Alloy
Constitution and Properties of the Ternary Magnesium Alloys Containing Two Rare-Earth Metals of Different Subgroups
Influence of Heat Treatment on Microstructure of Hot Extruded AZ31
HRTEM Observation of the Precipitates in Mg-Gd-Y-Zr Alloy
The Effect of Ca Addition on Age Hardening Behaviors and Mechanical Properties in Mg-Zn Alloy
Anisotropic Properties of Magnesium Sheet AZ31
Evaluation of Press Formability in Magnesium Alloy
Sheet Metal Production of Magnesium
Plane-Strain Backward Extrusion of AZ31 Magnesium Alloy
Tensile Properties and Bending Formability of Drawn Magnesium Alloy Pipes
Extrudability of Mg-Al-Zn Alloys
Recrystallized Grain Size in Cold-Rolled and Annealed AZ31 Wrought Magnesium Alloys Affected by Rolling Direction
Study on Warm Caliber Rolling of Magnesium Alloy
Friction Stir Welding of Magnesium Alloys
CAE Application to Press Forging of Magnesium Alloys
Formability of AZ91D Alloy by Casting - Forging Process
Isothermal Sheet Formability and Microstructure Study of Rolling Processed Magnesium Alloy AZ31
Mushy State Forming of Magnesium Alloy Making Use of Resistance Heating
The Diffusion Bonding and Theoretical Model Including Void Growth Mechanism in Magnesium Alloys
Microstructures of Friction Welded Joints of AZ31 to AM60 Magnesium Alloys
The Art of Developing New Magnesium Alloys for High Temperature Applications
Tensile and Creep Properties of Squeeze Cast Mg Alloys with Various Second Phases
Development of a Cheep Creep Resistant Mg-Al-Zn-Si-base Alloy
High Temperature Behaviour of the HPDC AS21X Magnesium Alloy
Newly Developed Heat Resistant Magnesium Alloy by Thixomolding
Heat Resistant Magnesium Alloys for Automotive Powertrain Applications
Development of Heat Resistant Mg-Zn-Al-Ca-RE Diecasting Alloys
Creep Characteristics of Ca-Added Die-Cast AM50 Magnesium Alloys
Thixoforming of Mg-9%Al Alloys with and without RE
Effects of Zinc on Creep Behavior and Deformation Substructures of Mg-Y Alloy
Mechanical Properties of Aged Mg-4Y-3RE Alloy
Effect of Adding La-Rich Mischmetal on the Microstructure and Mechanical Properties of Hot Extruded Mg-8Al Alloys
Effect of Al Content and Pressing Temperature on ECAP of Cast Mg Alloys
Using Extrusion and ECAP Processing to Achieve Low Temperature and High Strain Rate Superplasticity
Recrystallization During and Following Hot Working of Magnesium Alloy AZ31
Continuous Dynamic Recrystallization in Magnesium Alloy
Dynamic Nucleation of New Grains in Magnesium Alloy during Hot Deformation
Dynamic Recrystallization Based on Twinning in Coarse-Grained Mg
The Deformation Textures in an AZ31B Magnesium Alloy
Texture Development of AZ31 Magnesium Alloy during ECAE Processing
Superplastic Deformation Behavior in the Commercial AZ61 Mg Alloy during Biaxial Gas-Pressure Forming
Diffusion Process in AZ61 Magnesium Alloy and their Relation with the Cavitation Growth Rate
Superplastic Properties of Ultrafine-Grained Mg Alloys Processed by Extrusion Plus Equal-Channel Angular Pressing
Superplastic Behavior of an ECAE Processed ZK60 Magnesium Alloy
The AMC - CAST Alliance for Advanced Magnesium Research and Development
Effects of Protective Gases on the Oxidation Behavior of Mg-Ca Base Molten Alloys
Effect of Al and Y Additions on the Oxidation Behavior of Mg-Ca Base Molten Alloys
A Study on the Grain Refining Effects of Carbon Inoculation by C2Cl6 addition on AZ31 Magnesium Alloy
Effect of Soluble and Insoluble Zirconium on the Grain Refinement of Magnesium Alloys
Fabrication of Mg Alloy Strips by Strip Casting
Continuous Casting of Semisolid Mg-Al-Zn Alloy
Semi-Solid Processing of Magnesium Alloys
THIXOMAGTM, a Competitive Industrial Thixocasting Process for Magnesium Alloys with Semi-Solid Feedstock Billets
Investigation of Rheology of Magnesium Semi-Solid Materials by Using a Slit Rheometer
Application of Semi-Solid Forming to Magnesium Alloys with High Al and Zn Contents
Cost Effective Particle Reinforced Magnesium Composites
Effect of Ca and Be Additions on High Temperature Oxidation Behavior of AZ91 Alloys
Role of Partial Remelting on Thixotropic Structure of AZ91D Mg Alloy in the Semisolid State
Electrorefining of Mg in Molten Salt
Recovery of Magnesium from Molten Slag by Bubbling Argon though the Melt at Atmospheric Pressure
On-Line Monitoring of Liquid Magnesium using a High Temperature Ultrasonic Probe
Recycling of AZ31 Mg Alloy with High Purity Mg Deposition Layer by Hot Working (Solid Recycling)
Preparation of Mg Alloys by Using Molten Salt
Salt-Heated Furnaces for Refining of Magnesium and Its Alloys: Development of Design and Refining Process
Vacuum Distillation Refining and Recycling of Magnesium Alloys
Solubility of Iron in Pure Magnesium and Cast Structure of Mg-Fe Alloy
Manganese-Bearing Particles in Liquid AZ91 Magnesium Alloy
Development of High Strength Magnesium Alloys by Rapid Solidification
Electron Microscopy Study of Microstructure Modifications in RS P/M Mg97Zn1Y2 Alloy
Microstructure of High Strength Mg97Zn1Y2 Alloys Prepared by Extrusion of Gas-Atomized Powder
Microstructure of a High-Strength Nanocrystalline Mg-1at.%Zn-2at.%Y Alloy Studied by Atomic-Resolution Z-Contrast STEM
Structure and Properties of Rapidly Solidified Mg-Ag-X Ternary Alloys
Development of High Strength Mg Alloys by MA-HDH P/M Process
Solid-State Synthesis of Mg2Si Intermetallic Compound via Powder Metallurgy Process
Structure and Mechanical Properties of Rapidly Solidified Mg97Zn1RE2 Alloys
Rapidly Solidified Mg-(Ag, Sc)-X Alloys with High Strength
Development of High Strength Mg Alloys by Mechanical Alloying
Quality Improvement of Rapidly Solidified Magnesium Alloy by Plastic Processing
Mechanical Properties and Microstructure of Al18B4O33 / Magnesium Alloy Composites Prepared by Compo-Casting
In-situ Solid-State Synthesis of Mg2Si/MgO/Mg Composites
Effect of Extrusion Conditions on Properties of Hot Extruded Mg Composite with Mg2Si Dispersions via Solid-State Synthesis
Interfacial Microstructure and Fracture Behavior of SiC Whisker Reinforced Magnesium Matrix Composites
Tribological Property of Mg Composites via Powder Metallurgy Process
Creep Behaviour of Magnesium Monolithic Alloys and Composites
Stress Relaxation in Mg-Al-Alloy AZ31 Reinforced by Ceramic Foam
Deformation Processes in Mg-Li-Al Base Composites
Machining of Fibre Reinforced Magnesium
Mechanical Alloying of Magnesium and Mg-Al Alloy with Addition of MnO2 and Fe2O3
Some Studies on Mg Alloy Reinforced with Ceramic Discontinuous Phases
Electrochemical Corrosion Studies of Thixomolded AZ91D Alloy in Sodium Chloride Solution
Effect of Mg17Al12 Precipitate on Corrosion Behavior of AZ91D Magnesium Alloy
Effect of Second Phases on the Corrosion Behavior of Magnesium Alloys
Corrosion Behaviour of Magnesium Alloys with RE Additions in Sodium Chloride Solutions
Development of a Knowledge-Based System for the Design of Magnesium Components
Corrosion and Protection of Magnesium Alloy AZ31D by a New Conversion Coating
Permanganate Conversion Coatings for Magnesium Alloys
Corrosion Resistance of Polymer-Plated Magnesium Alloys
Anodic Films Growth on Magnesium and Magnesium Alloys in Fluoride Solutions
A New Technique for Surface Modification in Magnesium Alloys by Applying Magnesium Oxide Coating
Effect of Aluminum Coatings on Corrosion Properties of AZ31 Magnesium Alloy
Corrosion Resistance in Magnesium Alloys and Deposition Coated Magnesium Alloy
Direct Adhesion of PPS to Polymer-Plated Magnesium Alloys
Cold Coating of Magnesium Base Alloy Films by Ion Beam Sputtering
Microstructural Evolution of the Surface of Mg-Al-Based Alloy by Hydrogen Treatment
Corrosion Behavior of Rapidly Solidified Mg-Zn-Y Alloy Ribbons
Molecular Dynamics Simulation of Triazine Dithiol / MgO Interface
Technical Outline of None Chrome Treatment System (Ca-Mn Phosphating) for Magnesium Alloy
Anodizing of Magnesium in Amine - Ethylene Glycol Electrolyte
Lining of Magnesium Alloys with Foils Using Shot Peening
Surface Modification of Magnesium Alloys by Laser Alloying Using Si Powder
Machinability of Magnesium Alloy in Ultra-Precision Diamond Cutting
High-Pressure Synthesis of Novel Hydrides in Mg-RE Systems and Their Hydrogen Content (RE = Y, La)
Solid State Synthesis of Non-Equilibrium Mg2Co via Bulk Mechanical Alloying
Synthesis of MgB2 from Gas Atomized Mg Alloy Powders and its Superconductivity
Porous Bioresorbable Magnesium as Bone Substitute
Behavior of Magnesium in Hank's Solution Aimed to Trabecular Pattern of Natural Bone
Processing and Mechanical Properties of Open-Cell Mg Alloys
Manufacturing of Porous Magnesium Alloy by Pulse Electric Current Sintering Process and Their Compressive Properties
Microstructures and Protium Absorption/Desorption Characteristics of Interface-Controlled Mg-LaNi5 Composite
Fatigue Crack Propagation in Magnesium Single Crystals
Influence of Lithium on hcp Magnesium Alloys
「Nielsen BookData」 より