Functionally graded materials VII : proceedings of the seventh International Symposium on Functionally Graded Materials (FGM 2002), Beijing, China, October 15-18, 2002
著者
書誌事項
Functionally graded materials VII : proceedings of the seventh International Symposium on Functionally Graded Materials (FGM 2002), Beijing, China, October 15-18, 2002
(Materials science forum, v. 423-425)
Trans Tech Publications, c2003
- タイトル別名
-
FGM2002
大学図書館所蔵 件 / 全2件
-
該当する所蔵館はありません
- すべての絞り込み条件を解除する
注記
Includes bibliographical refernces and indexes
内容説明・目次
内容説明
Volume is indexed by Thomson Reuters CPCI-S (WoS).
Functionally graded materials (FGMs) exhibit spatial variations, in composition and/or microstructure, which have been imposed for the specific purpose of controlling the resultant variations in the thermal, structural or functional properties.
目次
The Activities of FGM on New Application
New Progress of Metal-Based Functionally Graded Plasma-Facing Materials in China
Industrial Applications of FGM Solutions
Design and Fabrication of Symmetric FGM Plates
Design and Densification of W-Mo Functionally Graded Materials with Smooth Changes of Composition by Co-Sedimentation
Functionally Graded Hardmetals with a Continuously Graded Symmetrical Profile
Large-Size-WC/Co Functionally Graded Materials Fabricated by Spark Plasma Sintering (SPS) Method
Fabrication of WC-Co Cemented Carbides with Gradient Distribution of WC Grain Size and Co Composition by Tape Casting
Design and Thermal Shock Performance of W/Cu Functionally Graded Material used as Plasma Facing Component
Fabrication and Properties of Axisymmetric WC/Co Functionally Graded Hard Metal via Microwave Sintering
The Anisotropy of Nanocomposite Nd9Fe84.5Nb0.5B6 Melt Spun Ribbons
Gradient Ni-Cr-Mo-Nb Surface Alloying Layer
Study on the Arc-Added Glow Discharge Plasma Non-Hydrogen Carburizing on Titanium Alloy Surfaces
Functionally Graded Boron Carbide-Aluminum Composites
Preparation of Flier-Plate Materials with Graded Impedance Used for Hypervelocity Launching
Oxidation Resistance of TiAl-Inconel625 Graded Alloying Layer
Thermal Shock Resistance and Ablation Behaviour of Titanium Diboride-Copper-Nickle FGM via SHS
Friction and Wear Properties of Functionally Graded Aluminum Matrix Composites
Characterization of Interface between Particles in Al Powder Compacts by Pulse Electric Current Sintering
Formation of Niobium Aluminide Layers on Niobium Plate by Arc Surface Alloying
Development of Shape Memory Alloy Fiber Reinforced Smart FGMs
Improvement of Diffusion Bonding Joint by Ar Ion Bombardment
Graded Machinable Ceramics: Concept and Practice
Graded Ceramics for Improved Contact-Damage Resistance
Surface Modification Technique of Structural Ceramics: Ion Implantation-Assisted Multi-Arc Ion Plating
Hardness and Tribological Properties of Silicon Nitride Ceramics Implanted by Titanium Ions with MEVVA Sources
Preparation of Core-Shell Type Particles by Injection Method
Hydrolysis Mechanism and Method to Improve Water Resistance of Long-After-Glow Phosphor
Mechanism of Forming the Nanocrystalline Mg,Al-Hydrotalcite and its Crystal Processing under Hydrothermal Conditions
Effect of Si4+ Doping on the Thermal Property and Thermal Decomposition Mechanism of Nanocrystalline Mg,Al-Hydrotalcite
Modification of Photophysical Properties of WO3 by Doping Different Metals
Characterization of Plasma Facing SiC/C Functionally Graded Material
Thick Plate-Shaped Al2O3/ZrO2 Composites with Continuous Gradient Processed by Electrophoretic Deposition
Microstructures and Toughening Behaviors of Lined Al2O3-ZrO2 Multiphase Ceramics in SHS Composite Pipes
Optimization Sintering of Zirconia/Alumina Functionally Graded Material
Design and Preparation of Al2TiO5/Al2O3 FGM
Farbrication and Properties of Machinable Al2O3/LaPO4 Composites and FGMs
Fabrication and Microstructure of MoSi2/Al2O3 Functionally Graded Material
Fabrication and Properties of TiC/Ti3SiC2 Composites and FGMs
Design and Fabrication of Machinable Al2O3/h-BN Composites and FGMs
Effective Thermal Conductivity of MoSi2/Oxide Composites
The Fabrication of TiCN-Based Functionally Graded Cermets by Spark Plasma Sintering
Formation of Graded and Fine-Grained Structures upon Hot Deformation of SHS Products
Microstructure and Oxidation Resistance of Carbon/Carbon Composites Coated with Si3N4-Si/MoSi2-SiC Multi-Layers by Slurry Coating and Post Heat-Treatment Process
Study on the Adsorption Properties of Al-Pillared Montmorillonites
Influence of Processing Condition on the Ceramics-Lined Pipes by Gravitational Thermit SHS Method
Fabrication of Al2O3-PSZ~Fe-Ni Functionally Graded Pipes
Modeling and Fabrication of Functionally Graded Materials by the Combustion Synthesis Technique
Thermal Stress Simulation in TiB2-Cu Functionally Graded Materials
Preparation of Cu/SiC FGM by Coating Method and SPS Sintering
Fabrication of Short-Cf/SiC Functionally Graded Materials
Al/SiCp Functionally Graded Metal-Matrix Composites Produced by Centrifugal Casting: Effect of Particle Grain Size on Reinforcement Distribution
Evaluation of Al/SiC Wetting Characteristics in Functionally Graded Metal-Matrix Composites by Synchrotron Radiation Microtomography
Experimental and Theoretical Investigation of R-Curve Behaviour in Al/Al2O3 Functionally Graded Materials
Multi-Billet Extrusion of Multi-Layer Composite Pipes Composed of Stainless Steel and Partially Stabilized Zirconia
Tensile Properties of Nanostructured FGMs Produced by Spark Plasma Sintering
Mechanism, Prosperities and Microstructure of Titanium Carbide-Iron Metal-Ceramic from Ilmenite by in Situ Carbothermic Reduction
Effects of FGM Interlayer on Joining Aluminum Nitride Ceramics to Copper
Multi-Layer Film Metallization of AlN Ceramic and its Sealing to Metal
Bonding of Copper to Aluminum Nitride Substrate Using Active Alloy Interlayer
Study on Mechanisms of SHS Transient Liquid Phase Bonding between Ceramics and Metal in the Composite Pipes
Thermal Conductivity of LTCC
Direct Evaluation of Three-Dimensional Platelet Orientation in Functionally Graded Model-Material Fabricated by a Centrifugal Solid-Particle Method
Development of Functionally Graded Implant and Dental Post for Bio-Medical Application
Hydroxyapatite Graded Coatings Made through Subsonic Thermal Spraying
Bioactivity of Plasma Sprayed Wollastonite Coatings in Simulated Body Fluid
Fabrication of Ti-O Gradient Biomedical Film on Ti6Al4V by DC Glow Plasma Oxidizing
Surface Modification of Biodegradable PLGA Scaffold with Chitosan for Cell Culture
A New Method for Protein Immobilization on the Surface of Poly-I-Lactic Acid Film
Preparation and Biological Evaluations of Heparinized PLLA Films
Preparation of SiC-Based Thermoelectric Device by Spark Plasma Sintering
Thermoelectric Properties on n-Type SixGe1-x Graded Materials Containing Fullerite and Nanometer Carbon Tube
Optimization and Properties of Graded Pseudo-Binary Alloy (PbTe)1-x-(SnTe)x Prepared by Spark Plasma Sintering
Preparation and Interface Analysis of the Segmented CoSb3/Bi2Te3 Thermoelectric Materials
Effect of FGMs on Thermoelectric Cooling Properties of Bismuth Telluride
Improvement of Thermoelectric Properties for n-Type PbTe by Adding Ge
Graded Design of Carrier Concentration in PbTe by Heat-Treatment
Developing Mechanically and Chemically Stable Contacts between Bi2Te3 and FeSi2
Piezoelectric Ceramic/Metal Bending Actuators with Functionally Graded Microstructures
Development of Piezoelectric Ceramic Actuators with Graded Porosity
Preparation and Dielectric Property of Strontium-Lead Titanate Functionally Graded Ceramics
Characterization of (Ba,Sr)TiO3 Functionally Graded Dielectric Ceramics Fabricated from Chemical Coprecipitated Nano-Particles
Fabrication of Cu/PZT Functionally Graded Actuators by Spark Plasma Sintering
Design of Functionally Graded Materials towards RAM and their Microwave Reflectivity
Investigation on Pyroelectric Effect of Multi-Component PMN-PT Ferroelectric Ceramics
Control of Magnetic Gradient in Magnetically Graded Materials Fabricated by Martensitic Transformation Technique
Proton Conductivity of Compositionally Graded Proton Conducting Oxides
Thermal, Mechanical Properties and Ionic Conductivity of (PEO)16LiClO4 Electrolytes with Different Shape ZnO
Gradient Ni/SDC Anodes for Solid Oxide Fuel Cells by Tape Casting
Linearization of the Characteristics of a FGM Thermal Sensor Made from -FeSi2
Electrothermal Driving Mechanism for SMA Spring Actuators
Design and Optimization of Flier-Plate Materials with Wave Impedance Gradient
Effect of Magnetic Field on the Preparation of Silver Halide Emulsion in Gelatin
Experimental and Theoretical Studies of Photocatalytic Water Splitting on Mixed Oxide Semiconductors
Photophysical and Photocatalytic Properties of New Photocatalysts CaIn0.5M0.5O3 (M = Nb, Ta)
Synthesis, Structure and Photocatalytic Property of a New Hydrogen Evolving Photocatalyst Bi2InTaO7
Development of Novel Spinel-Type Photocatalysts for Hydrogen Generation by Solar Energy Conversion
Research of Alumina and Brazing Filler Metal Interface
Rheological Properties of Polyacrylate Thickening Agent
Preparation of Graded-Index Polymer Optical Fiber Preform
Structure Study of Polymer Gradient Materials
Rheological Properties of Polyacrylate Thickening Agent by Model Experiments
Factors of Refractive Index Distribution of GI POF Preform
The Influence of Bond Coat and Oxide Layer on the Debonding of Graded Coatings
Formation Kinetics and Properties of CrNx/H13 Functionally Graded Coating Fabricated by PVD
Preparation of Functionally Graded Coating on AlN Surface by Molten Salt Reaction
Behavior of Ti Coating in CBN/Ti/Vitrified Bond Gradient Materials
TiN Coating Deposited by ARC Method
Al2O3-Al2Cu3 Coating Produced by SHS Reactive Spraying
Thermal Shock Resistance of Ceramic/Metal Gradient Thermal Barrier Coating
Analysis and Measurement of Thermal Residual Stresses in Ceramic/Metal Gradient Thermal Barrier Coatings
Study on Plasma-Carburization Process of Ni-Base Self-Fluxing Alloy Coating
The Fabrication and Characteristics of Sr1-xBaxBi4Ti4O15 Functionally Graded Thin Films by Sol-Gel Method
Synthesis of Nanocrystalline Magnetite (Fe3O4) Films by Self-Reduction Sol-Gel Route
A New Application of Pulsed Laser Deposition to Produce Functional Graded Material Thin Films
Investigation of Al2O3 Coating with FGMs Structure by SHS
Preparation and Optical Properties of Strontium-Barium-Bismuth Titanate Graded Thin Films
Tetrahedral Amorphous Carbon Films Prepared by Filtered Catholic Vacuum Arc Deposition
Fabrication of the Volatile Corrosion Film with FGMs Structure
The Strength of Functionally Graded Joints: Crack Paths and Residual Stress for Cracks Perpendicular to the Gradient
Development of Functionally Gradient Materials
An Interface Crack between a Functionally Graded Coating and a Homogeneous Substrate under Thermo-Mechanical Loading
Two-Cracks Propagation Problem in a Functionally Graded Material Plate under Thermal Loads
Energy Release Rate of Functionally Graded Materials with Interface Edge-Cracks under Uniform Temperature Change
Fractal Discrimination of Toughness/Fragileness on In-Situ FGM of Aluminum Base by Centrifugal Casting
Analysis of a Mode III Crack in a Functionally Gradient Piezoelectric Material
Estimate of Crack Speed in Functionally Graded Material Based on T* Crack
Surface Cracking of Functionally Graded Materials with Arbitrarily Distributed Properties
Impact Characteristic Analysis of Ceramic/Metal FGM
Dynamic Fracture of a Functionally Graded Coating
Cohesive Model for Thin Graded Film/Substrate Interfacial Cleavage Fracture
FEM Simulations and Optimization about Residual Stresses in Coating Structures with Functionally Graded Materials Layer
Transient and Residual Stresses in a Hollow Cylinder of Functionally Graded Materials
Heat Transfer and Thermal Stress Analysis of Ceramic/Metal Gradient Cylinder Model
Finite Element Analysis of Thermal Residual Stress in Ceramic Functional Graded Material: Interface Optimization for Residual Reduction
Thermal Elastic-Plastic Limit Analysis and Optimal Design for Composite Cylinders of Ceramic/Metal Functionally Graded Materials
Computational Micromechanics Analysis of the Functionally Graded Materials under Thermal Shock Loading
Stress Analysis in Multilayered FGM Plates under Thermal Shock
Thermal Stress Research on the Functionally Gradient Material
Analysis of Gradient Forming Design for FGM of Axisymmetrical Geometries with Thermal Stress Relaxation
Development and Experimental Validation of a Numerical Thermal Model for the Evaluation of the Depth of Laser Treated Zone in the Laser Transformation Hardening Process
Optimization of Material Composition of FGM Coating under Thermal Loading by Micro Genetic Algorithms
Axisymmetric Post-Buckling of a Functionally Graded Circular Plate Subjected to Uniformly Distributed Radial Compression
Using the Adjoint Equation Method to Optimize FGM Thermoelastic Structures
Elastic and Plastic Analyses of Functionally Graded Elements
Assessment on Anisotropic Properties of Particle-Dispersed Composites with Debonded Interface
On Deformations of a Spherically Isotropic Hollow Sphere of a Functionally Graded Material
Formation of Graded Mechanical Properties in Turnouts
Simulation of Particle Trajectories and Statistical Analysis in Twin-Screw Extruders
Numerical Simulation of Twin-Screw Extrusion with Wall Slip
Development of Ceramic/Metal Gradient Thermal Barrier Coating Design Software
Efficient Reformulation of the Higher-Order Theory for FGMs
The Heterogeneous Constitutive Theory of the Generalized Functionally Graded Materials Structure
Emission Control of Electromagnetic Wave by Using Diamond Photonic Crystals with Graded Lattice Spacing
The Optimization Design on Metal/Ceramic FGM Armor with Neural Net and Conjugate Gradient Method
An Investigation into Application of Ceramic-Metal FGM Plating to Small High Speed Gasoline Engines
Researches on Hypervelocity Launching by Flier-Plate Materials with Graded Impedance
Solar Excited Laser Using FGM Concept for Space Energy Network
An Examination of the Design of a kW-Range 3-Stage Cascade-Type Thermoelectric Power Generation Device Composed of HB-Type Thermoelectric Modules
Design of Functionally Graded Wood-Based Board for Floor Heating System with Higher Energy Efficiency
New Visible Light Driven Semiconductor Photocatalysts and their Applications as Functional Eco-Materials
「Nielsen BookData」 より